1 | /* SPDX-License-Identifier: GPL-2.0 */ |
2 | #ifndef _B44_H |
3 | #define _B44_H |
4 | |
5 | #include <linux/brcmphy.h> |
6 | |
7 | /* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */ |
8 | #define B44_DEVCTRL 0x0000UL /* Device Control */ |
9 | #define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */ |
10 | #define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */ |
11 | #define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */ |
12 | #define DEVCTRL_EPR 0x00008000 /* EPHY Reset */ |
13 | #define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */ |
14 | #define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */ |
15 | #define DEVCTRL_PADDR 0x0007c000 /* PHY Address */ |
16 | #define DEVCTRL_PADDR_SHIFT 18 |
17 | #define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */ |
18 | #define B44_WKUP_LEN 0x0010UL /* Wakeup Length */ |
19 | #define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */ |
20 | #define WKUP_LEN_D0 0x00000080 |
21 | #define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */ |
22 | #define WKUP_LEN_P1_SHIFT 8 |
23 | #define WKUP_LEN_D1 0x00008000 |
24 | #define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */ |
25 | #define WKUP_LEN_P2_SHIFT 16 |
26 | #define WKUP_LEN_D2 0x00000000 |
27 | #define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */ |
28 | #define WKUP_LEN_P3_SHIFT 24 |
29 | #define WKUP_LEN_D3 0x80000000 |
30 | #define WKUP_LEN_DISABLE 0x80808080 |
31 | #define WKUP_LEN_ENABLE_TWO 0x80800000 |
32 | #define WKUP_LEN_ENABLE_THREE 0x80000000 |
33 | #define B44_ISTAT 0x0020UL /* Interrupt Status */ |
34 | #define ISTAT_LS 0x00000020 /* Link Change (B0 only) */ |
35 | #define ISTAT_PME 0x00000040 /* Power Management Event */ |
36 | #define ISTAT_TO 0x00000080 /* General Purpose Timeout */ |
37 | #define ISTAT_DSCE 0x00000400 /* Descriptor Error */ |
38 | #define ISTAT_DATAE 0x00000800 /* Data Error */ |
39 | #define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */ |
40 | #define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */ |
41 | #define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */ |
42 | #define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */ |
43 | #define ISTAT_RX 0x00010000 /* RX Interrupt */ |
44 | #define ISTAT_TX 0x01000000 /* TX Interrupt */ |
45 | #define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */ |
46 | #define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */ |
47 | #define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */ |
48 | #define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU) |
49 | #define B44_IMASK 0x0024UL /* Interrupt Mask */ |
50 | #define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX) |
51 | #define B44_GPTIMER 0x0028UL /* General Purpose Timer */ |
52 | #define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */ |
53 | #define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */ |
54 | #define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */ |
55 | #define B44_FILT_DATA 0x0094UL /* ENET Filter Data */ |
56 | #define B44_TXBURST 0x00A0UL /* TX Max Burst Length */ |
57 | #define B44_RXBURST 0x00A4UL /* RX Max Burst Length */ |
58 | #define B44_MAC_CTRL 0x00A8UL /* MAC Control */ |
59 | #define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */ |
60 | #define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */ |
61 | #define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */ |
62 | #define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */ |
63 | #define MAC_CTRL_PHY_LEDCTRL_SHIFT 5 |
64 | #define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */ |
65 | #define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */ |
66 | #define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */ |
67 | #define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */ |
68 | #define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */ |
69 | #define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */ |
70 | #define RCV_LAZY_FC_SHIFT 24 |
71 | #define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */ |
72 | #define DMATX_CTRL_ENABLE 0x00000001 /* Enable */ |
73 | #define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */ |
74 | #define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */ |
75 | #define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */ |
76 | #define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */ |
77 | #define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */ |
78 | #define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */ |
79 | #define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */ |
80 | #define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ |
81 | #define DMATX_STAT_SMASK 0x0000f000 /* State Mask */ |
82 | #define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */ |
83 | #define DMATX_STAT_SACTIVE 0x00001000 /* State Active */ |
84 | #define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */ |
85 | #define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */ |
86 | #define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */ |
87 | #define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */ |
88 | #define DMATX_STAT_ENONE 0x00000000 /* Error None */ |
89 | #define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ |
90 | #define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */ |
91 | #define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */ |
92 | #define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ |
93 | #define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */ |
94 | #define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */ |
95 | #define DMARX_CTRL_ENABLE 0x00000001 /* Enable */ |
96 | #define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */ |
97 | #define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */ |
98 | #define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */ |
99 | #define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */ |
100 | #define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */ |
101 | #define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ |
102 | #define DMARX_STAT_SMASK 0x0000f000 /* State Mask */ |
103 | #define DMARX_STAT_SDISABLED 0x00000000 /* State Disabled */ |
104 | #define DMARX_STAT_SACTIVE 0x00001000 /* State Active */ |
105 | #define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */ |
106 | #define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */ |
107 | #define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */ |
108 | #define DMARX_STAT_ENONE 0x00000000 /* Error None */ |
109 | #define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ |
110 | #define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */ |
111 | #define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */ |
112 | #define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ |
113 | #define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */ |
114 | #define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */ |
115 | #define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */ |
116 | #define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */ |
117 | #define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */ |
118 | #define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */ |
119 | #define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */ |
120 | #define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */ |
121 | #define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */ |
122 | #define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */ |
123 | #define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */ |
124 | #define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */ |
125 | #define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */ |
126 | #define B44_RXCONFIG 0x0400UL /* EMAC RX Config */ |
127 | #define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */ |
128 | #define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */ |
129 | #define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */ |
130 | #define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */ |
131 | #define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */ |
132 | #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ |
133 | #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ |
134 | #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ |
135 | #define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */ |
136 | #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ |
137 | #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ |
138 | #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ |
139 | #define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */ |
140 | #define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */ |
141 | #define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */ |
142 | #define MDIO_DATA_DATA 0x0000ffff /* R/W Data */ |
143 | #define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */ |
144 | #define MDIO_DATA_TA_SHIFT 16 |
145 | #define MDIO_TA_VALID 2 |
146 | #define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */ |
147 | #define MDIO_DATA_RA_SHIFT 18 |
148 | #define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */ |
149 | #define MDIO_DATA_PMD_SHIFT 23 |
150 | #define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */ |
151 | #define MDIO_DATA_OP_SHIFT 28 |
152 | #define MDIO_OP_WRITE 1 |
153 | #define MDIO_OP_READ 2 |
154 | #define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */ |
155 | #define MDIO_DATA_SB_SHIFT 30 |
156 | #define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */ |
157 | #define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */ |
158 | #define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */ |
159 | #define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */ |
160 | #define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */ |
161 | #define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */ |
162 | #define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */ |
163 | #define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */ |
164 | #define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */ |
165 | #define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */ |
166 | #define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */ |
167 | #define CAM_CTRL_MSEL 0x00000002 /* Mask Select */ |
168 | #define CAM_CTRL_READ 0x00000004 /* Read */ |
169 | #define CAM_CTRL_WRITE 0x00000008 /* Read */ |
170 | #define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */ |
171 | #define CAM_CTRL_INDEX_SHIFT 16 |
172 | #define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */ |
173 | #define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */ |
174 | #define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */ |
175 | #define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */ |
176 | #define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */ |
177 | #define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */ |
178 | #define B44_TX_CTRL 0x0430UL /* EMAC TX Control */ |
179 | #define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */ |
180 | #define TX_CTRL_FMODE 0x00000002 /* Flow Mode */ |
181 | #define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */ |
182 | #define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */ |
183 | #define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */ |
184 | #define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */ |
185 | #define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */ |
186 | #define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */ |
187 | #define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */ |
188 | #define B44_TX_O 0x0508UL /* MIB TX Octets */ |
189 | #define B44_TX_P 0x050CUL /* MIB TX Packets */ |
190 | #define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */ |
191 | #define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */ |
192 | #define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */ |
193 | #define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */ |
194 | #define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */ |
195 | #define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */ |
196 | #define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */ |
197 | #define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */ |
198 | #define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */ |
199 | #define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */ |
200 | #define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */ |
201 | #define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */ |
202 | #define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */ |
203 | #define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */ |
204 | #define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */ |
205 | #define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */ |
206 | #define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */ |
207 | #define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */ |
208 | #define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */ |
209 | #define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */ |
210 | #define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */ |
211 | #define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */ |
212 | #define B44_RX_O 0x0588UL /* MIB RX Octets */ |
213 | #define B44_RX_P 0x058CUL /* MIB RX Packets */ |
214 | #define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */ |
215 | #define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */ |
216 | #define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */ |
217 | #define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */ |
218 | #define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */ |
219 | #define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */ |
220 | #define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */ |
221 | #define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */ |
222 | #define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */ |
223 | #define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */ |
224 | #define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */ |
225 | #define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */ |
226 | #define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */ |
227 | #define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */ |
228 | #define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */ |
229 | #define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */ |
230 | #define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */ |
231 | #define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ |
232 | #define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ |
233 | |
234 | /* 4400 PHY registers */ |
235 | #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ |
236 | #define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ |
237 | #define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */ |
238 | #define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */ |
239 | #define B44_MII_ALEDCTRL 26 /* Activity LED */ |
240 | #define MII_ALEDCTRL_ALLMSK 0x7fff |
241 | #define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */ |
242 | #define MII_TLEDCTRL_ENABLE 0x0040 |
243 | |
244 | struct dma_desc { |
245 | __le32 ctrl; |
246 | __le32 addr; |
247 | }; |
248 | |
249 | /* There are only 12 bits in the DMA engine for descriptor offsetting |
250 | * so the table must be aligned on a boundary of this. |
251 | */ |
252 | #define DMA_TABLE_BYTES 4096 |
253 | |
254 | #define DESC_CTRL_LEN 0x00001fff |
255 | #define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */ |
256 | #define DESC_CTRL_EOT 0x10000000 /* End of Table */ |
257 | #define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */ |
258 | #define DESC_CTRL_EOF 0x40000000 /* End of Frame */ |
259 | #define DESC_CTRL_SOF 0x80000000 /* Start of Frame */ |
260 | |
261 | #define RX_COPY_THRESHOLD 256 |
262 | |
263 | struct { |
264 | __le16 ; |
265 | __le16 ; |
266 | __le16 [12]; |
267 | }; |
268 | #define 28 |
269 | |
270 | #define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */ |
271 | #define RX_FLAG_CRCERR 0x00000002 /* CRC Error */ |
272 | #define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */ |
273 | #define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */ |
274 | #define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */ |
275 | #define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */ |
276 | #define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */ |
277 | #define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */ |
278 | #define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */ |
279 | #define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO) |
280 | |
281 | struct ring_info { |
282 | struct sk_buff *skb; |
283 | dma_addr_t mapping; |
284 | }; |
285 | |
286 | #define B44_MCAST_TABLE_SIZE 32 |
287 | /* no local phy regs, e.g: Broadcom switches pseudo-PHY */ |
288 | #define B44_PHY_ADDR_NO_LOCAL_PHY BRCM_PSEUDO_PHY_ADDR |
289 | /* no phy present at all */ |
290 | #define B44_PHY_ADDR_NO_PHY 31 |
291 | #define B44_MDC_RATIO 5000000 |
292 | |
293 | #define B44_STAT_REG_DECLARE \ |
294 | _B44(tx_good_octets) \ |
295 | _B44(tx_good_pkts) \ |
296 | _B44(tx_octets) \ |
297 | _B44(tx_pkts) \ |
298 | _B44(tx_broadcast_pkts) \ |
299 | _B44(tx_multicast_pkts) \ |
300 | _B44(tx_len_64) \ |
301 | _B44(tx_len_65_to_127) \ |
302 | _B44(tx_len_128_to_255) \ |
303 | _B44(tx_len_256_to_511) \ |
304 | _B44(tx_len_512_to_1023) \ |
305 | _B44(tx_len_1024_to_max) \ |
306 | _B44(tx_jabber_pkts) \ |
307 | _B44(tx_oversize_pkts) \ |
308 | _B44(tx_fragment_pkts) \ |
309 | _B44(tx_underruns) \ |
310 | _B44(tx_total_cols) \ |
311 | _B44(tx_single_cols) \ |
312 | _B44(tx_multiple_cols) \ |
313 | _B44(tx_excessive_cols) \ |
314 | _B44(tx_late_cols) \ |
315 | _B44(tx_defered) \ |
316 | _B44(tx_carrier_lost) \ |
317 | _B44(tx_pause_pkts) \ |
318 | _B44(rx_good_octets) \ |
319 | _B44(rx_good_pkts) \ |
320 | _B44(rx_octets) \ |
321 | _B44(rx_pkts) \ |
322 | _B44(rx_broadcast_pkts) \ |
323 | _B44(rx_multicast_pkts) \ |
324 | _B44(rx_len_64) \ |
325 | _B44(rx_len_65_to_127) \ |
326 | _B44(rx_len_128_to_255) \ |
327 | _B44(rx_len_256_to_511) \ |
328 | _B44(rx_len_512_to_1023) \ |
329 | _B44(rx_len_1024_to_max) \ |
330 | _B44(rx_jabber_pkts) \ |
331 | _B44(rx_oversize_pkts) \ |
332 | _B44(rx_fragment_pkts) \ |
333 | _B44(rx_missed_pkts) \ |
334 | _B44(rx_crc_align_errs) \ |
335 | _B44(rx_undersize) \ |
336 | _B44(rx_crc_errs) \ |
337 | _B44(rx_align_errs) \ |
338 | _B44(rx_symbol_errs) \ |
339 | _B44(rx_pause_pkts) \ |
340 | _B44(rx_nonpause_pkts) |
341 | |
342 | /* SW copy of device statistics, kept up to date by periodic timer |
343 | * which probes HW values. Check b44_stats_update if you mess with |
344 | * the layout |
345 | */ |
346 | struct b44_hw_stats { |
347 | #define _B44(x) u64 x; |
348 | B44_STAT_REG_DECLARE |
349 | #undef _B44 |
350 | struct u64_stats_sync syncp; |
351 | }; |
352 | |
353 | #define B44_BOARDFLAG_ROBO 0x0010 /* Board has robo switch */ |
354 | #define B44_BOARDFLAG_ADM 0x0080 /* Board has ADMtek switch */ |
355 | |
356 | struct ssb_device; |
357 | |
358 | struct b44 { |
359 | spinlock_t lock; |
360 | |
361 | u32 imask, istat; |
362 | |
363 | struct dma_desc *rx_ring, *tx_ring; |
364 | |
365 | u32 tx_prod, tx_cons; |
366 | u32 rx_prod, rx_cons; |
367 | |
368 | struct ring_info *rx_buffers; |
369 | struct ring_info *tx_buffers; |
370 | |
371 | struct napi_struct napi; |
372 | |
373 | u32 dma_offset; |
374 | u32 flags; |
375 | #define B44_FLAG_B0_ANDLATER 0x00000001 |
376 | #define B44_FLAG_BUGGY_TXPTR 0x00000002 |
377 | #define B44_FLAG_REORDER_BUG 0x00000004 |
378 | #define B44_FLAG_PAUSE_AUTO 0x00008000 |
379 | #define B44_FLAG_FULL_DUPLEX 0x00010000 |
380 | #define B44_FLAG_100_BASE_T 0x00020000 |
381 | #define B44_FLAG_TX_PAUSE 0x00040000 |
382 | #define B44_FLAG_RX_PAUSE 0x00080000 |
383 | #define B44_FLAG_FORCE_LINK 0x00100000 |
384 | #define B44_FLAG_ADV_10HALF 0x01000000 |
385 | #define B44_FLAG_ADV_10FULL 0x02000000 |
386 | #define B44_FLAG_ADV_100HALF 0x04000000 |
387 | #define B44_FLAG_ADV_100FULL 0x08000000 |
388 | #define B44_FLAG_EXTERNAL_PHY 0x10000000 |
389 | #define B44_FLAG_RX_RING_HACK 0x20000000 |
390 | #define B44_FLAG_TX_RING_HACK 0x40000000 |
391 | #define B44_FLAG_WOL_ENABLE 0x80000000 |
392 | |
393 | u32 msg_enable; |
394 | |
395 | struct timer_list timer; |
396 | |
397 | struct b44_hw_stats hw_stats; |
398 | |
399 | struct ssb_device *sdev; |
400 | struct net_device *dev; |
401 | |
402 | dma_addr_t rx_ring_dma, tx_ring_dma; |
403 | |
404 | u32 rx_pending; |
405 | u32 tx_pending; |
406 | u8 phy_addr; |
407 | u8 force_copybreak; |
408 | struct mii_bus *mii_bus; |
409 | int old_link; |
410 | struct mii_if_info mii_if; |
411 | }; |
412 | |
413 | #endif /* _B44_H */ |
414 | |