| 1 | /* |
| 2 | * Toshiba rbtx4927 specific setup |
| 3 | * |
| 4 | * Author: MontaVista Software, Inc. |
| 5 | * source@mvista.com |
| 6 | * |
| 7 | * Copyright 2001-2002 MontaVista Software Inc. |
| 8 | * |
| 9 | * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) |
| 10 | * Copyright (C) 2000 RidgeRun, Inc. |
| 11 | * Author: RidgeRun, Inc. |
| 12 | * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com |
| 13 | * |
| 14 | * Copyright 2001 MontaVista Software Inc. |
| 15 | * Author: jsun@mvista.com or jsun@junsun.net |
| 16 | * |
| 17 | * Copyright 2002 MontaVista Software Inc. |
| 18 | * Author: Michael Pruznick, michael_pruznick@mvista.com |
| 19 | * |
| 20 | * Copyright (C) 2000-2001 Toshiba Corporation |
| 21 | * |
| 22 | * Copyright (C) 2004 MontaVista Software Inc. |
| 23 | * Author: Manish Lachwani, mlachwani@mvista.com |
| 24 | * |
| 25 | * This program is free software; you can redistribute it and/or modify it |
| 26 | * under the terms of the GNU General Public License as published by the |
| 27 | * Free Software Foundation; either version 2 of the License, or (at your |
| 28 | * option) any later version. |
| 29 | * |
| 30 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 31 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 32 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| 33 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 34 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| 35 | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| 36 | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 37 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 38 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 39 | * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 40 | * |
| 41 | * You should have received a copy of the GNU General Public License along |
| 42 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 43 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 44 | */ |
| 45 | #include <linux/init.h> |
| 46 | #include <linux/kernel.h> |
| 47 | #include <linux/types.h> |
| 48 | #include <linux/ioport.h> |
| 49 | #include <linux/platform_device.h> |
| 50 | #include <linux/delay.h> |
| 51 | #include <linux/gpio.h> |
| 52 | #include <linux/leds.h> |
| 53 | #include <asm/io.h> |
| 54 | #include <asm/reboot.h> |
| 55 | #include <asm/txx9pio.h> |
| 56 | #include <asm/txx9/generic.h> |
| 57 | #include <asm/txx9/pci.h> |
| 58 | #include <asm/txx9/rbtx4927.h> |
| 59 | #include <asm/txx9/tx4938.h> /* for TX4937 */ |
| 60 | |
| 61 | #ifdef CONFIG_PCI |
| 62 | static void __init tx4927_pci_setup(void) |
| 63 | { |
| 64 | int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB); |
| 65 | struct pci_controller *c = &txx9_primary_pcic; |
| 66 | |
| 67 | register_pci_controller(c); |
| 68 | |
| 69 | if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) |
| 70 | txx9_pci_option = |
| 71 | (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | |
| 72 | TXX9_PCI_OPT_CLK_66; /* already configured */ |
| 73 | |
| 74 | /* Reset PCI Bus */ |
| 75 | writeb(val: 1, addr: rbtx4927_pcireset_addr); |
| 76 | /* Reset PCIC */ |
| 77 | txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| 78 | if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| 79 | TXX9_PCI_OPT_CLK_66) |
| 80 | tx4927_pciclk66_setup(); |
| 81 | mdelay(10); |
| 82 | /* clear PCIC reset */ |
| 83 | txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| 84 | writeb(val: 0, addr: rbtx4927_pcireset_addr); |
| 85 | iob(); |
| 86 | |
| 87 | tx4927_report_pciclk(); |
| 88 | tx4927_pcic_setup(tx4927_pcicptr, c, extarb); |
| 89 | if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| 90 | TXX9_PCI_OPT_CLK_AUTO && |
| 91 | txx9_pci66_check(c, 0, 0)) { |
| 92 | /* Reset PCI Bus */ |
| 93 | writeb(val: 1, addr: rbtx4927_pcireset_addr); |
| 94 | /* Reset PCIC */ |
| 95 | txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| 96 | tx4927_pciclk66_setup(); |
| 97 | mdelay(10); |
| 98 | /* clear PCIC reset */ |
| 99 | txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| 100 | writeb(val: 0, addr: rbtx4927_pcireset_addr); |
| 101 | iob(); |
| 102 | /* Reinitialize PCIC */ |
| 103 | tx4927_report_pciclk(); |
| 104 | tx4927_pcic_setup(tx4927_pcicptr, c, extarb); |
| 105 | } |
| 106 | tx4927_setup_pcierr_irq(); |
| 107 | } |
| 108 | |
| 109 | static void __init tx4937_pci_setup(void) |
| 110 | { |
| 111 | int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); |
| 112 | struct pci_controller *c = &txx9_primary_pcic; |
| 113 | |
| 114 | register_pci_controller(c); |
| 115 | |
| 116 | if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) |
| 117 | txx9_pci_option = |
| 118 | (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | |
| 119 | TXX9_PCI_OPT_CLK_66; /* already configured */ |
| 120 | |
| 121 | /* Reset PCI Bus */ |
| 122 | writeb(1, rbtx4927_pcireset_addr); |
| 123 | /* Reset PCIC */ |
| 124 | txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| 125 | if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| 126 | TXX9_PCI_OPT_CLK_66) |
| 127 | tx4938_pciclk66_setup(); |
| 128 | mdelay(10); |
| 129 | /* clear PCIC reset */ |
| 130 | txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| 131 | writeb(0, rbtx4927_pcireset_addr); |
| 132 | iob(); |
| 133 | |
| 134 | tx4938_report_pciclk(); |
| 135 | tx4927_pcic_setup(tx4938_pcicptr, c, extarb); |
| 136 | if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| 137 | TXX9_PCI_OPT_CLK_AUTO && |
| 138 | txx9_pci66_check(c, 0, 0)) { |
| 139 | /* Reset PCI Bus */ |
| 140 | writeb(1, rbtx4927_pcireset_addr); |
| 141 | /* Reset PCIC */ |
| 142 | txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| 143 | tx4938_pciclk66_setup(); |
| 144 | mdelay(10); |
| 145 | /* clear PCIC reset */ |
| 146 | txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| 147 | writeb(0, rbtx4927_pcireset_addr); |
| 148 | iob(); |
| 149 | /* Reinitialize PCIC */ |
| 150 | tx4938_report_pciclk(); |
| 151 | tx4927_pcic_setup(tx4938_pcicptr, c, extarb); |
| 152 | } |
| 153 | tx4938_setup_pcierr_irq(); |
| 154 | } |
| 155 | #else |
| 156 | static inline void tx4927_pci_setup(void) {} |
| 157 | static inline void tx4937_pci_setup(void) {} |
| 158 | #endif /* CONFIG_PCI */ |
| 159 | |
| 160 | static void __init rbtx4927_gpio_init(void) |
| 161 | { |
| 162 | /* TX4927-SIO DTR on (PIO[15]) */ |
| 163 | gpio_request(gpio: 15, label: "sio-dtr" ); |
| 164 | gpio_direction_output(gpio: 15, value: 1); |
| 165 | |
| 166 | tx4927_sio_init(0, 0); |
| 167 | } |
| 168 | |
| 169 | static void __init rbtx4927_arch_init(void) |
| 170 | { |
| 171 | txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO); |
| 172 | |
| 173 | rbtx4927_gpio_init(); |
| 174 | |
| 175 | tx4927_pci_setup(); |
| 176 | } |
| 177 | |
| 178 | static void __init rbtx4937_arch_init(void) |
| 179 | { |
| 180 | txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO); |
| 181 | |
| 182 | rbtx4927_gpio_init(); |
| 183 | |
| 184 | tx4937_pci_setup(); |
| 185 | } |
| 186 | |
| 187 | static void toshiba_rbtx4927_restart(char *command) |
| 188 | { |
| 189 | /* enable the s/w reset register */ |
| 190 | writeb(1, rbtx4927_softresetlock_addr); |
| 191 | |
| 192 | /* wait for enable to be seen */ |
| 193 | while (!(readb(rbtx4927_softresetlock_addr) & 1)) |
| 194 | ; |
| 195 | |
| 196 | /* do a s/w reset */ |
| 197 | writeb(1, rbtx4927_softreset_addr); |
| 198 | |
| 199 | /* fallback */ |
| 200 | (*_machine_halt)(); |
| 201 | } |
| 202 | |
| 203 | static void __init rbtx4927_clock_init(void); |
| 204 | static void __init rbtx4937_clock_init(void); |
| 205 | |
| 206 | static void __init rbtx4927_mem_setup(void) |
| 207 | { |
| 208 | if (TX4927_REV_PCODE() == 0x4927) { |
| 209 | rbtx4927_clock_init(); |
| 210 | tx4927_setup(); |
| 211 | } else { |
| 212 | rbtx4937_clock_init(); |
| 213 | tx4938_setup(); |
| 214 | } |
| 215 | |
| 216 | _machine_restart = toshiba_rbtx4927_restart; |
| 217 | |
| 218 | #ifdef CONFIG_PCI |
| 219 | txx9_alloc_pci_controller(&txx9_primary_pcic, |
| 220 | RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, |
| 221 | RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); |
| 222 | txx9_board_pcibios_setup = tx4927_pcibios_setup; |
| 223 | #else |
| 224 | set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); |
| 225 | #endif |
| 226 | } |
| 227 | |
| 228 | static void __init rbtx4927_clock_init(void) |
| 229 | { |
| 230 | /* |
| 231 | * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. |
| 232 | * |
| 233 | * For TX4927: |
| 234 | * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). |
| 235 | * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) |
| 236 | * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) |
| 237 | * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) |
| 238 | * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) |
| 239 | * i.e. S9[3]: ON (83MHz), OFF (100MHz) |
| 240 | */ |
| 241 | switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & |
| 242 | TX4927_CCFG_PCIDIVMODE_MASK) { |
| 243 | case TX4927_CCFG_PCIDIVMODE_2_5: |
| 244 | case TX4927_CCFG_PCIDIVMODE_5: |
| 245 | txx9_cpu_clock = 166666666; /* 166MHz */ |
| 246 | break; |
| 247 | default: |
| 248 | txx9_cpu_clock = 200000000; /* 200MHz */ |
| 249 | } |
| 250 | } |
| 251 | |
| 252 | static void __init rbtx4937_clock_init(void) |
| 253 | { |
| 254 | /* |
| 255 | * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. |
| 256 | * |
| 257 | * For TX4937: |
| 258 | * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) |
| 259 | * PCIDIVMODE[10] is 0. |
| 260 | * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) |
| 261 | * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) |
| 262 | * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) |
| 263 | * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) |
| 264 | * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) |
| 265 | * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) |
| 266 | */ |
| 267 | switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & |
| 268 | TX4938_CCFG_PCIDIVMODE_MASK) { |
| 269 | case TX4938_CCFG_PCIDIVMODE_8: |
| 270 | case TX4938_CCFG_PCIDIVMODE_4: |
| 271 | txx9_cpu_clock = 266666666; /* 266MHz */ |
| 272 | break; |
| 273 | case TX4938_CCFG_PCIDIVMODE_9: |
| 274 | case TX4938_CCFG_PCIDIVMODE_4_5: |
| 275 | txx9_cpu_clock = 300000000; /* 300MHz */ |
| 276 | break; |
| 277 | default: |
| 278 | txx9_cpu_clock = 333333333; /* 333MHz */ |
| 279 | } |
| 280 | } |
| 281 | |
| 282 | static void __init rbtx4927_time_init(void) |
| 283 | { |
| 284 | tx4927_time_init(0); |
| 285 | } |
| 286 | |
| 287 | static void __init toshiba_rbtx4927_rtc_init(void) |
| 288 | { |
| 289 | struct resource res = { |
| 290 | .start = RBTX4927_BRAMRTC_BASE - IO_BASE, |
| 291 | .end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1, |
| 292 | .flags = IORESOURCE_MEM, |
| 293 | }; |
| 294 | platform_device_register_simple(name: "rtc-ds1742" , id: -1, res: &res, num: 1); |
| 295 | } |
| 296 | |
| 297 | static void __init rbtx4927_ne_init(void) |
| 298 | { |
| 299 | struct resource res[] = { |
| 300 | { |
| 301 | .start = RBTX4927_RTL_8019_BASE, |
| 302 | .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, |
| 303 | .flags = IORESOURCE_IO, |
| 304 | }, { |
| 305 | .start = RBTX4927_RTL_8019_IRQ, |
| 306 | .flags = IORESOURCE_IRQ, |
| 307 | } |
| 308 | }; |
| 309 | platform_device_register_simple("ne" , -1, res, ARRAY_SIZE(res)); |
| 310 | } |
| 311 | |
| 312 | static void __init rbtx4927_mtd_init(void) |
| 313 | { |
| 314 | int i; |
| 315 | |
| 316 | for (i = 0; i < 2; i++) |
| 317 | tx4927_mtd_init(i); |
| 318 | } |
| 319 | |
| 320 | static void __init rbtx4927_gpioled_init(void) |
| 321 | { |
| 322 | static const struct gpio_led leds[] = { |
| 323 | { .name = "gpioled:green:0" , .gpio = 0, .active_low = 1, }, |
| 324 | { .name = "gpioled:green:1" , .gpio = 1, .active_low = 1, }, |
| 325 | }; |
| 326 | static struct gpio_led_platform_data pdata = { |
| 327 | .num_leds = ARRAY_SIZE(leds), |
| 328 | .leds = leds, |
| 329 | }; |
| 330 | struct platform_device *pdev = platform_device_alloc(name: "leds-gpio" , id: 0); |
| 331 | |
| 332 | if (!pdev) |
| 333 | return; |
| 334 | pdev->dev.platform_data = &pdata; |
| 335 | if (platform_device_add(pdev)) |
| 336 | platform_device_put(pdev); |
| 337 | } |
| 338 | |
| 339 | static void __init rbtx4927_device_init(void) |
| 340 | { |
| 341 | toshiba_rbtx4927_rtc_init(); |
| 342 | rbtx4927_ne_init(); |
| 343 | tx4927_wdt_init(); |
| 344 | rbtx4927_mtd_init(); |
| 345 | if (TX4927_REV_PCODE() == 0x4927) { |
| 346 | tx4927_dmac_init(2); |
| 347 | tx4927_aclc_init(0, 1); |
| 348 | } else { |
| 349 | tx4938_dmac_init(0, 2); |
| 350 | tx4938_aclc_init(); |
| 351 | } |
| 352 | platform_device_register_simple(name: "txx9aclc-generic" , id: -1, NULL, num: 0); |
| 353 | txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green" , NULL); |
| 354 | rbtx4927_gpioled_init(); |
| 355 | } |
| 356 | |
| 357 | struct txx9_board_vec rbtx4927_vec __initdata = { |
| 358 | .system = "Toshiba RBTX4927" , |
| 359 | .prom_init = rbtx4927_prom_init, |
| 360 | .mem_setup = rbtx4927_mem_setup, |
| 361 | .irq_setup = rbtx4927_irq_setup, |
| 362 | .time_init = rbtx4927_time_init, |
| 363 | .device_init = rbtx4927_device_init, |
| 364 | .arch_init = rbtx4927_arch_init, |
| 365 | #ifdef CONFIG_PCI |
| 366 | .pci_map_irq = rbtx4927_pci_map_irq, |
| 367 | #endif |
| 368 | }; |
| 369 | struct txx9_board_vec rbtx4937_vec __initdata = { |
| 370 | .system = "Toshiba RBTX4937" , |
| 371 | .prom_init = rbtx4927_prom_init, |
| 372 | .mem_setup = rbtx4927_mem_setup, |
| 373 | .irq_setup = rbtx4927_irq_setup, |
| 374 | .time_init = rbtx4927_time_init, |
| 375 | .device_init = rbtx4927_device_init, |
| 376 | .arch_init = rbtx4937_arch_init, |
| 377 | #ifdef CONFIG_PCI |
| 378 | .pci_map_irq = rbtx4927_pci_map_irq, |
| 379 | #endif |
| 380 | }; |
| 381 | |