| 1 | /* |
| 2 | * Copyright (c) 2017 Mellanox Technologies. All rights reserved. |
| 3 | * |
| 4 | * This software is available to you under a choice of one of two |
| 5 | * licenses. You may choose to be licensed under the terms of the GNU |
| 6 | * General Public License (GPL) Version 2, available from the file |
| 7 | * COPYING in the main directory of this source tree, or the |
| 8 | * OpenIB.org BSD license below: |
| 9 | * |
| 10 | * Redistribution and use in source and binary forms, with or |
| 11 | * without modification, are permitted provided that the following |
| 12 | * conditions are met: |
| 13 | * |
| 14 | * - Redistributions of source code must retain the above |
| 15 | * copyright notice, this list of conditions and the following |
| 16 | * disclaimer. |
| 17 | * |
| 18 | * - Redistributions in binary form must reproduce the above |
| 19 | * copyright notice, this list of conditions and the following |
| 20 | * disclaimer in the documentation and/or other materials |
| 21 | * provided with the distribution. |
| 22 | * |
| 23 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 24 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| 25 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 26 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| 27 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| 28 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| 29 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| 30 | * SOFTWARE. |
| 31 | * |
| 32 | */ |
| 33 | |
| 34 | #include <crypto/internal/geniv.h> |
| 35 | #include <crypto/aead.h> |
| 36 | #include <linux/inetdevice.h> |
| 37 | #include <linux/netdevice.h> |
| 38 | #include <net/netevent.h> |
| 39 | #include <net/ipv6_stubs.h> |
| 40 | |
| 41 | #include "en.h" |
| 42 | #include "eswitch.h" |
| 43 | #include "ipsec.h" |
| 44 | #include "ipsec_rxtx.h" |
| 45 | #include "en_rep.h" |
| 46 | |
| 47 | #define MLX5_IPSEC_RESCHED msecs_to_jiffies(1000) |
| 48 | #define MLX5E_IPSEC_TUNNEL_SA XA_MARK_1 |
| 49 | |
| 50 | static struct mlx5e_ipsec_sa_entry *to_ipsec_sa_entry(struct xfrm_state *x) |
| 51 | { |
| 52 | return (struct mlx5e_ipsec_sa_entry *)x->xso.offload_handle; |
| 53 | } |
| 54 | |
| 55 | static struct mlx5e_ipsec_pol_entry *to_ipsec_pol_entry(struct xfrm_policy *x) |
| 56 | { |
| 57 | return (struct mlx5e_ipsec_pol_entry *)x->xdo.offload_handle; |
| 58 | } |
| 59 | |
| 60 | static void mlx5e_ipsec_handle_sw_limits(struct work_struct *_work) |
| 61 | { |
| 62 | struct mlx5e_ipsec_dwork *dwork = |
| 63 | container_of(_work, struct mlx5e_ipsec_dwork, dwork.work); |
| 64 | struct mlx5e_ipsec_sa_entry *sa_entry = dwork->sa_entry; |
| 65 | struct xfrm_state *x = sa_entry->x; |
| 66 | |
| 67 | if (sa_entry->attrs.drop) |
| 68 | return; |
| 69 | |
| 70 | spin_lock_bh(lock: &x->lock); |
| 71 | if (x->km.state == XFRM_STATE_EXPIRED) { |
| 72 | sa_entry->attrs.drop = true; |
| 73 | spin_unlock_bh(lock: &x->lock); |
| 74 | |
| 75 | mlx5e_accel_ipsec_fs_modify(sa_entry); |
| 76 | return; |
| 77 | } |
| 78 | |
| 79 | if (x->km.state != XFRM_STATE_VALID) { |
| 80 | spin_unlock_bh(lock: &x->lock); |
| 81 | return; |
| 82 | } |
| 83 | |
| 84 | xfrm_state_check_expire(x); |
| 85 | spin_unlock_bh(lock: &x->lock); |
| 86 | |
| 87 | queue_delayed_work(wq: sa_entry->ipsec->wq, dwork: &dwork->dwork, |
| 88 | MLX5_IPSEC_RESCHED); |
| 89 | } |
| 90 | |
| 91 | static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry) |
| 92 | { |
| 93 | struct xfrm_state *x = sa_entry->x; |
| 94 | u32 seq_bottom = 0; |
| 95 | u32 esn, esn_msb; |
| 96 | u8 overlap; |
| 97 | |
| 98 | switch (x->xso.dir) { |
| 99 | case XFRM_DEV_OFFLOAD_IN: |
| 100 | esn = x->replay_esn->seq; |
| 101 | esn_msb = x->replay_esn->seq_hi; |
| 102 | break; |
| 103 | case XFRM_DEV_OFFLOAD_OUT: |
| 104 | esn = x->replay_esn->oseq; |
| 105 | esn_msb = x->replay_esn->oseq_hi; |
| 106 | break; |
| 107 | default: |
| 108 | WARN_ON(true); |
| 109 | return false; |
| 110 | } |
| 111 | |
| 112 | overlap = sa_entry->esn_state.overlap; |
| 113 | |
| 114 | if (!x->replay_esn->replay_window) { |
| 115 | seq_bottom = esn; |
| 116 | } else { |
| 117 | if (esn >= x->replay_esn->replay_window) |
| 118 | seq_bottom = esn - x->replay_esn->replay_window + 1; |
| 119 | |
| 120 | if (x->xso.type == XFRM_DEV_OFFLOAD_CRYPTO) |
| 121 | esn_msb = xfrm_replay_seqhi(x, htonl(seq_bottom)); |
| 122 | } |
| 123 | |
| 124 | if (sa_entry->esn_state.esn_msb) |
| 125 | sa_entry->esn_state.esn = esn; |
| 126 | else |
| 127 | /* According to RFC4303, section "3.3.3. Sequence Number Generation", |
| 128 | * the first packet sent using a given SA will contain a sequence |
| 129 | * number of 1. |
| 130 | */ |
| 131 | sa_entry->esn_state.esn = max_t(u32, esn, 1); |
| 132 | sa_entry->esn_state.esn_msb = esn_msb; |
| 133 | |
| 134 | if (unlikely(overlap && seq_bottom < MLX5E_IPSEC_ESN_SCOPE_MID)) { |
| 135 | sa_entry->esn_state.overlap = 0; |
| 136 | return true; |
| 137 | } else if (unlikely(!overlap && |
| 138 | (seq_bottom >= MLX5E_IPSEC_ESN_SCOPE_MID))) { |
| 139 | sa_entry->esn_state.overlap = 1; |
| 140 | return true; |
| 141 | } |
| 142 | |
| 143 | return false; |
| 144 | } |
| 145 | |
| 146 | static void mlx5e_ipsec_init_limits(struct mlx5e_ipsec_sa_entry *sa_entry, |
| 147 | struct mlx5_accel_esp_xfrm_attrs *attrs) |
| 148 | { |
| 149 | struct xfrm_state *x = sa_entry->x; |
| 150 | s64 start_value, n; |
| 151 | |
| 152 | attrs->lft.hard_packet_limit = x->lft.hard_packet_limit; |
| 153 | attrs->lft.soft_packet_limit = x->lft.soft_packet_limit; |
| 154 | if (x->lft.soft_packet_limit == XFRM_INF) |
| 155 | return; |
| 156 | |
| 157 | /* Compute hard limit initial value and number of rounds. |
| 158 | * |
| 159 | * The counting pattern of hardware counter goes: |
| 160 | * value -> 2^31-1 |
| 161 | * 2^31 | (2^31-1) -> 2^31-1 |
| 162 | * 2^31 | (2^31-1) -> 2^31-1 |
| 163 | * [..] |
| 164 | * 2^31 | (2^31-1) -> 0 |
| 165 | * |
| 166 | * The pattern is created by using an ASO operation to atomically set |
| 167 | * bit 31 after the down counter clears bit 31. This is effectively an |
| 168 | * atomic addition of 2**31 to the counter. |
| 169 | * |
| 170 | * We wish to configure the counter, within the above pattern, so that |
| 171 | * when it reaches 0, it has hit the hard limit. This is defined by this |
| 172 | * system of equations: |
| 173 | * |
| 174 | * hard_limit == start_value + n * 2^31 |
| 175 | * n >= 0 |
| 176 | * start_value < 2^32, start_value >= 0 |
| 177 | * |
| 178 | * These equations are not single-solution, there are often two choices: |
| 179 | * hard_limit == start_value + n * 2^31 |
| 180 | * hard_limit == (start_value+2^31) + (n-1) * 2^31 |
| 181 | * |
| 182 | * The algorithm selects the solution that keeps the counter value |
| 183 | * above 2^31 until the final iteration. |
| 184 | */ |
| 185 | |
| 186 | /* Start by estimating n and compute start_value */ |
| 187 | n = attrs->lft.hard_packet_limit / BIT_ULL(31); |
| 188 | start_value = attrs->lft.hard_packet_limit - n * BIT_ULL(31); |
| 189 | |
| 190 | /* Choose the best of the two solutions: */ |
| 191 | if (n >= 1) |
| 192 | n -= 1; |
| 193 | |
| 194 | /* Computed values solve the system of equations: */ |
| 195 | start_value = attrs->lft.hard_packet_limit - n * BIT_ULL(31); |
| 196 | |
| 197 | /* The best solution means: when there are multiple iterations we must |
| 198 | * start above 2^31 and count down to 2**31 to get the interrupt. |
| 199 | */ |
| 200 | attrs->lft.hard_packet_limit = lower_32_bits(start_value); |
| 201 | attrs->lft.numb_rounds_hard = (u64)n; |
| 202 | |
| 203 | /* Compute soft limit initial value and number of rounds. |
| 204 | * |
| 205 | * The soft_limit is achieved by adjusting the counter's |
| 206 | * interrupt_value. This is embedded in the counting pattern created by |
| 207 | * hard packet calculations above. |
| 208 | * |
| 209 | * We wish to compute the interrupt_value for the soft_limit. This is |
| 210 | * defined by this system of equations: |
| 211 | * |
| 212 | * soft_limit == start_value - soft_value + n * 2^31 |
| 213 | * n >= 0 |
| 214 | * soft_value < 2^32, soft_value >= 0 |
| 215 | * for n == 0 start_value > soft_value |
| 216 | * |
| 217 | * As with compute_hard_n_value() the equations are not single-solution. |
| 218 | * The algorithm selects the solution that has: |
| 219 | * 2^30 <= soft_limit < 2^31 + 2^30 |
| 220 | * for the interior iterations, which guarantees a large guard band |
| 221 | * around the counter hard limit and next interrupt. |
| 222 | */ |
| 223 | |
| 224 | /* Start by estimating n and compute soft_value */ |
| 225 | n = (x->lft.soft_packet_limit - attrs->lft.hard_packet_limit) / BIT_ULL(31); |
| 226 | start_value = attrs->lft.hard_packet_limit + n * BIT_ULL(31) - |
| 227 | x->lft.soft_packet_limit; |
| 228 | |
| 229 | /* Compare against constraints and adjust n */ |
| 230 | if (n < 0) |
| 231 | n = 0; |
| 232 | else if (start_value >= BIT_ULL(32)) |
| 233 | n -= 1; |
| 234 | else if (start_value < 0) |
| 235 | n += 1; |
| 236 | |
| 237 | /* Choose the best of the two solutions: */ |
| 238 | start_value = attrs->lft.hard_packet_limit + n * BIT_ULL(31) - start_value; |
| 239 | if (n != attrs->lft.numb_rounds_hard && start_value < BIT_ULL(30)) |
| 240 | n += 1; |
| 241 | |
| 242 | /* Note that the upper limit of soft_value happens naturally because we |
| 243 | * always select the lowest soft_value. |
| 244 | */ |
| 245 | |
| 246 | /* Computed values solve the system of equations: */ |
| 247 | start_value = attrs->lft.hard_packet_limit + n * BIT_ULL(31) - start_value; |
| 248 | |
| 249 | /* The best solution means: when there are multiple iterations we must |
| 250 | * not fall below 2^30 as that would get too close to the false |
| 251 | * hard_limit and when we reach an interior iteration for soft_limit it |
| 252 | * has to be far away from 2**32-1 which is the counter reset point |
| 253 | * after the +2^31 to accommodate latency. |
| 254 | */ |
| 255 | attrs->lft.soft_packet_limit = lower_32_bits(start_value); |
| 256 | attrs->lft.numb_rounds_soft = (u64)n; |
| 257 | } |
| 258 | |
| 259 | static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry, |
| 260 | struct mlx5_accel_esp_xfrm_attrs *attrs) |
| 261 | { |
| 262 | struct mlx5_core_dev *mdev = mlx5e_ipsec_sa2dev(sa_entry); |
| 263 | struct mlx5e_ipsec_addr *addrs = &attrs->addrs; |
| 264 | struct net_device *netdev = sa_entry->dev; |
| 265 | struct xfrm_state *x = sa_entry->x; |
| 266 | struct dst_entry *rt_dst_entry; |
| 267 | struct flowi4 fl4 = {}; |
| 268 | struct flowi6 fl6 = {}; |
| 269 | struct neighbour *n; |
| 270 | u8 addr[ETH_ALEN]; |
| 271 | struct rtable *rt; |
| 272 | const void *pkey; |
| 273 | u8 *dst, *src; |
| 274 | |
| 275 | if (attrs->mode != XFRM_MODE_TUNNEL || |
| 276 | attrs->type != XFRM_DEV_OFFLOAD_PACKET) |
| 277 | return; |
| 278 | |
| 279 | mlx5_query_mac_address(mdev, addr); |
| 280 | switch (attrs->dir) { |
| 281 | case XFRM_DEV_OFFLOAD_IN: |
| 282 | src = attrs->dmac; |
| 283 | dst = attrs->smac; |
| 284 | |
| 285 | switch (addrs->family) { |
| 286 | case AF_INET: |
| 287 | fl4.flowi4_proto = x->sel.proto; |
| 288 | fl4.daddr = addrs->saddr.a4; |
| 289 | fl4.saddr = addrs->daddr.a4; |
| 290 | pkey = &addrs->saddr.a4; |
| 291 | break; |
| 292 | case AF_INET6: |
| 293 | fl6.flowi6_proto = x->sel.proto; |
| 294 | memcpy(fl6.daddr.s6_addr32, addrs->saddr.a6, 16); |
| 295 | memcpy(fl6.saddr.s6_addr32, addrs->daddr.a6, 16); |
| 296 | pkey = &addrs->saddr.a6; |
| 297 | break; |
| 298 | default: |
| 299 | return; |
| 300 | } |
| 301 | break; |
| 302 | case XFRM_DEV_OFFLOAD_OUT: |
| 303 | src = attrs->smac; |
| 304 | dst = attrs->dmac; |
| 305 | switch (addrs->family) { |
| 306 | case AF_INET: |
| 307 | fl4.flowi4_proto = x->sel.proto; |
| 308 | fl4.daddr = addrs->daddr.a4; |
| 309 | fl4.saddr = addrs->saddr.a4; |
| 310 | pkey = &addrs->daddr.a4; |
| 311 | break; |
| 312 | case AF_INET6: |
| 313 | fl6.flowi6_proto = x->sel.proto; |
| 314 | memcpy(fl6.daddr.s6_addr32, addrs->daddr.a6, 16); |
| 315 | memcpy(fl6.saddr.s6_addr32, addrs->saddr.a6, 16); |
| 316 | pkey = &addrs->daddr.a6; |
| 317 | break; |
| 318 | default: |
| 319 | return; |
| 320 | } |
| 321 | break; |
| 322 | default: |
| 323 | return; |
| 324 | } |
| 325 | |
| 326 | ether_addr_copy(dst: src, src: addr); |
| 327 | |
| 328 | /* Destination can refer to a routed network, so perform FIB lookup |
| 329 | * to resolve nexthop and get its MAC. Neighbour resolution is used as |
| 330 | * fallback. |
| 331 | */ |
| 332 | switch (addrs->family) { |
| 333 | case AF_INET: |
| 334 | rt = ip_route_output_key(net: dev_net(dev: netdev), flp: &fl4); |
| 335 | if (IS_ERR(ptr: rt)) |
| 336 | goto neigh; |
| 337 | |
| 338 | if (rt->rt_type != RTN_UNICAST) { |
| 339 | ip_rt_put(rt); |
| 340 | goto neigh; |
| 341 | } |
| 342 | rt_dst_entry = &rt->dst; |
| 343 | break; |
| 344 | case AF_INET6: |
| 345 | if (!IS_ENABLED(CONFIG_IPV6) || |
| 346 | ip6_dst_lookup(net: dev_net(dev: netdev), NULL, dst: &rt_dst_entry, fl6: &fl6)) |
| 347 | goto neigh; |
| 348 | break; |
| 349 | default: |
| 350 | return; |
| 351 | } |
| 352 | |
| 353 | n = dst_neigh_lookup(dst: rt_dst_entry, daddr: pkey); |
| 354 | if (!n) { |
| 355 | dst_release(dst: rt_dst_entry); |
| 356 | goto neigh; |
| 357 | } |
| 358 | |
| 359 | neigh_ha_snapshot(dst: addr, n, dev: netdev); |
| 360 | ether_addr_copy(dst, src: addr); |
| 361 | if (attrs->dir == XFRM_DEV_OFFLOAD_OUT && |
| 362 | is_zero_ether_addr(addr)) |
| 363 | neigh_event_send(neigh: n, NULL); |
| 364 | dst_release(dst: rt_dst_entry); |
| 365 | neigh_release(neigh: n); |
| 366 | return; |
| 367 | |
| 368 | neigh: |
| 369 | n = neigh_lookup(tbl: &arp_tbl, pkey, dev: netdev); |
| 370 | if (!n) { |
| 371 | n = neigh_create(tbl: &arp_tbl, pkey, dev: netdev); |
| 372 | if (IS_ERR(ptr: n)) |
| 373 | return; |
| 374 | neigh_event_send(neigh: n, NULL); |
| 375 | attrs->drop = true; |
| 376 | } else { |
| 377 | neigh_ha_snapshot(dst: addr, n, dev: netdev); |
| 378 | ether_addr_copy(dst, src: addr); |
| 379 | } |
| 380 | neigh_release(neigh: n); |
| 381 | } |
| 382 | |
| 383 | static void mlx5e_ipsec_state_mask(struct mlx5e_ipsec_addr *addrs) |
| 384 | { |
| 385 | /* |
| 386 | * State doesn't have subnet prefixes in outer headers. |
| 387 | * The match is performed for exaxt source/destination addresses. |
| 388 | */ |
| 389 | memset(addrs->smask.m6, 0xFF, sizeof(__be32) * 4); |
| 390 | memset(addrs->dmask.m6, 0xFF, sizeof(__be32) * 4); |
| 391 | } |
| 392 | |
| 393 | void mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry, |
| 394 | struct mlx5_accel_esp_xfrm_attrs *attrs) |
| 395 | { |
| 396 | struct xfrm_state *x = sa_entry->x; |
| 397 | struct aes_gcm_keymat *aes_gcm = &attrs->aes_gcm; |
| 398 | struct aead_geniv_ctx *geniv_ctx; |
| 399 | struct crypto_aead *aead; |
| 400 | unsigned int crypto_data_len, key_len; |
| 401 | int ivsize; |
| 402 | |
| 403 | memset(attrs, 0, sizeof(*attrs)); |
| 404 | |
| 405 | /* key */ |
| 406 | crypto_data_len = (x->aead->alg_key_len + 7) / 8; |
| 407 | key_len = crypto_data_len - 4; /* 4 bytes salt at end */ |
| 408 | |
| 409 | memcpy(aes_gcm->aes_key, x->aead->alg_key, key_len); |
| 410 | aes_gcm->key_len = key_len * 8; |
| 411 | |
| 412 | /* salt and seq_iv */ |
| 413 | aead = x->data; |
| 414 | geniv_ctx = crypto_aead_ctx(tfm: aead); |
| 415 | ivsize = crypto_aead_ivsize(tfm: aead); |
| 416 | memcpy(&aes_gcm->seq_iv, &geniv_ctx->salt, ivsize); |
| 417 | memcpy(&aes_gcm->salt, x->aead->alg_key + key_len, |
| 418 | sizeof(aes_gcm->salt)); |
| 419 | |
| 420 | attrs->authsize = crypto_aead_authsize(tfm: aead) / 4; /* in dwords */ |
| 421 | |
| 422 | /* iv len */ |
| 423 | aes_gcm->icv_len = x->aead->alg_icv_len; |
| 424 | |
| 425 | attrs->dir = x->xso.dir; |
| 426 | |
| 427 | /* esn */ |
| 428 | if (x->props.flags & XFRM_STATE_ESN) { |
| 429 | attrs->replay_esn.trigger = true; |
| 430 | attrs->replay_esn.esn = sa_entry->esn_state.esn; |
| 431 | attrs->replay_esn.esn_msb = sa_entry->esn_state.esn_msb; |
| 432 | attrs->replay_esn.overlap = sa_entry->esn_state.overlap; |
| 433 | if (attrs->dir == XFRM_DEV_OFFLOAD_OUT || |
| 434 | x->xso.type != XFRM_DEV_OFFLOAD_PACKET) |
| 435 | goto skip_replay_window; |
| 436 | |
| 437 | switch (x->replay_esn->replay_window) { |
| 438 | case 32: |
| 439 | attrs->replay_esn.replay_window = |
| 440 | MLX5_IPSEC_ASO_REPLAY_WIN_32BIT; |
| 441 | break; |
| 442 | case 64: |
| 443 | attrs->replay_esn.replay_window = |
| 444 | MLX5_IPSEC_ASO_REPLAY_WIN_64BIT; |
| 445 | break; |
| 446 | case 128: |
| 447 | attrs->replay_esn.replay_window = |
| 448 | MLX5_IPSEC_ASO_REPLAY_WIN_128BIT; |
| 449 | break; |
| 450 | case 256: |
| 451 | attrs->replay_esn.replay_window = |
| 452 | MLX5_IPSEC_ASO_REPLAY_WIN_256BIT; |
| 453 | break; |
| 454 | default: |
| 455 | WARN_ON(true); |
| 456 | return; |
| 457 | } |
| 458 | } |
| 459 | |
| 460 | skip_replay_window: |
| 461 | /* spi */ |
| 462 | attrs->spi = be32_to_cpu(x->id.spi); |
| 463 | |
| 464 | /* source , destination ips */ |
| 465 | memcpy(&attrs->addrs.saddr, x->props.saddr.a6, |
| 466 | sizeof(attrs->addrs.saddr)); |
| 467 | memcpy(&attrs->addrs.daddr, x->id.daddr.a6, sizeof(attrs->addrs.daddr)); |
| 468 | attrs->addrs.family = x->props.family; |
| 469 | mlx5e_ipsec_state_mask(addrs: &attrs->addrs); |
| 470 | attrs->type = x->xso.type; |
| 471 | attrs->reqid = x->props.reqid; |
| 472 | attrs->upspec.dport = ntohs(x->sel.dport); |
| 473 | attrs->upspec.dport_mask = ntohs(x->sel.dport_mask); |
| 474 | attrs->upspec.sport = ntohs(x->sel.sport); |
| 475 | attrs->upspec.sport_mask = ntohs(x->sel.sport_mask); |
| 476 | attrs->upspec.proto = x->sel.proto; |
| 477 | attrs->mode = x->props.mode; |
| 478 | |
| 479 | mlx5e_ipsec_init_limits(sa_entry, attrs); |
| 480 | mlx5e_ipsec_init_macs(sa_entry, attrs); |
| 481 | |
| 482 | if (x->encap) { |
| 483 | attrs->encap = true; |
| 484 | attrs->sport = x->encap->encap_sport; |
| 485 | attrs->dport = x->encap->encap_dport; |
| 486 | } |
| 487 | } |
| 488 | |
| 489 | static int mlx5e_xfrm_validate_state(struct mlx5_core_dev *mdev, |
| 490 | struct xfrm_state *x, |
| 491 | struct netlink_ext_ack *extack) |
| 492 | { |
| 493 | if (x->props.aalgo != SADB_AALG_NONE) { |
| 494 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload authenticated xfrm states" ); |
| 495 | return -EINVAL; |
| 496 | } |
| 497 | if (x->props.ealgo != SADB_X_EALG_AES_GCM_ICV16) { |
| 498 | NL_SET_ERR_MSG_MOD(extack, "Only AES-GCM-ICV16 xfrm state may be offloaded" ); |
| 499 | return -EINVAL; |
| 500 | } |
| 501 | if (x->props.calgo != SADB_X_CALG_NONE) { |
| 502 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload compressed xfrm states" ); |
| 503 | return -EINVAL; |
| 504 | } |
| 505 | if (x->props.flags & XFRM_STATE_ESN && |
| 506 | !(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_ESN)) { |
| 507 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload ESN xfrm states" ); |
| 508 | return -EINVAL; |
| 509 | } |
| 510 | if (x->props.family != AF_INET && |
| 511 | x->props.family != AF_INET6) { |
| 512 | NL_SET_ERR_MSG_MOD(extack, "Only IPv4/6 xfrm states may be offloaded" ); |
| 513 | return -EINVAL; |
| 514 | } |
| 515 | if (x->id.proto != IPPROTO_ESP) { |
| 516 | NL_SET_ERR_MSG_MOD(extack, "Only ESP xfrm state may be offloaded" ); |
| 517 | return -EINVAL; |
| 518 | } |
| 519 | if (x->encap) { |
| 520 | if (!(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_ESPINUDP)) { |
| 521 | NL_SET_ERR_MSG_MOD(extack, |
| 522 | "Encapsulation is not supported" ); |
| 523 | return -EINVAL; |
| 524 | } |
| 525 | |
| 526 | if (x->encap->encap_type != UDP_ENCAP_ESPINUDP) { |
| 527 | NL_SET_ERR_MSG_MOD(extack, "Encapsulation other than UDP is not supported" ); |
| 528 | return -EINVAL; |
| 529 | } |
| 530 | |
| 531 | if (x->xso.type != XFRM_DEV_OFFLOAD_PACKET) { |
| 532 | NL_SET_ERR_MSG_MOD(extack, "Encapsulation is supported in packet offload mode only" ); |
| 533 | return -EINVAL; |
| 534 | } |
| 535 | |
| 536 | if (x->props.mode != XFRM_MODE_TRANSPORT) { |
| 537 | NL_SET_ERR_MSG_MOD(extack, "Encapsulation is supported in transport mode only" ); |
| 538 | return -EINVAL; |
| 539 | } |
| 540 | } |
| 541 | if (!x->aead) { |
| 542 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload xfrm states without aead" ); |
| 543 | return -EINVAL; |
| 544 | } |
| 545 | if (x->aead->alg_icv_len != 128) { |
| 546 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload xfrm states with AEAD ICV length other than 128bit" ); |
| 547 | return -EINVAL; |
| 548 | } |
| 549 | if ((x->aead->alg_key_len != 128 + 32) && |
| 550 | (x->aead->alg_key_len != 256 + 32)) { |
| 551 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload xfrm states with AEAD key length other than 128/256 bit" ); |
| 552 | return -EINVAL; |
| 553 | } |
| 554 | if (x->tfcpad) { |
| 555 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload xfrm states with tfc padding" ); |
| 556 | return -EINVAL; |
| 557 | } |
| 558 | if (!x->geniv) { |
| 559 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload xfrm states without geniv" ); |
| 560 | return -EINVAL; |
| 561 | } |
| 562 | if (strcmp(x->geniv, "seqiv" )) { |
| 563 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload xfrm states with geniv other than seqiv" ); |
| 564 | return -EINVAL; |
| 565 | } |
| 566 | |
| 567 | if (x->sel.proto != IPPROTO_IP && x->sel.proto != IPPROTO_UDP && |
| 568 | x->sel.proto != IPPROTO_TCP) { |
| 569 | NL_SET_ERR_MSG_MOD(extack, "Device does not support upper protocol other than TCP/UDP" ); |
| 570 | return -EINVAL; |
| 571 | } |
| 572 | |
| 573 | if (x->props.mode != XFRM_MODE_TRANSPORT && x->props.mode != XFRM_MODE_TUNNEL) { |
| 574 | NL_SET_ERR_MSG_MOD(extack, "Only transport and tunnel xfrm states may be offloaded" ); |
| 575 | return -EINVAL; |
| 576 | } |
| 577 | |
| 578 | switch (x->xso.type) { |
| 579 | case XFRM_DEV_OFFLOAD_CRYPTO: |
| 580 | if (!(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_CRYPTO)) { |
| 581 | NL_SET_ERR_MSG_MOD(extack, "Crypto offload is not supported" ); |
| 582 | return -EINVAL; |
| 583 | } |
| 584 | |
| 585 | break; |
| 586 | case XFRM_DEV_OFFLOAD_PACKET: |
| 587 | if (!(mlx5_ipsec_device_caps(mdev) & |
| 588 | MLX5_IPSEC_CAP_PACKET_OFFLOAD)) { |
| 589 | NL_SET_ERR_MSG_MOD(extack, "Packet offload is not supported" ); |
| 590 | return -EINVAL; |
| 591 | } |
| 592 | |
| 593 | if (x->props.mode == XFRM_MODE_TUNNEL && |
| 594 | !(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_TUNNEL)) { |
| 595 | NL_SET_ERR_MSG_MOD(extack, "Packet offload is not supported for tunnel mode" ); |
| 596 | return -EINVAL; |
| 597 | } |
| 598 | |
| 599 | if (x->replay_esn && x->xso.dir == XFRM_DEV_OFFLOAD_IN && |
| 600 | x->replay_esn->replay_window != 32 && |
| 601 | x->replay_esn->replay_window != 64 && |
| 602 | x->replay_esn->replay_window != 128 && |
| 603 | x->replay_esn->replay_window != 256) { |
| 604 | NL_SET_ERR_MSG_MOD(extack, "Unsupported replay window size" ); |
| 605 | return -EINVAL; |
| 606 | } |
| 607 | |
| 608 | if (!x->props.reqid) { |
| 609 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload without reqid" ); |
| 610 | return -EINVAL; |
| 611 | } |
| 612 | |
| 613 | if (x->lft.soft_byte_limit >= x->lft.hard_byte_limit && |
| 614 | x->lft.hard_byte_limit != XFRM_INF) { |
| 615 | /* XFRM stack doesn't prevent such configuration :(. */ |
| 616 | NL_SET_ERR_MSG_MOD(extack, "Hard byte limit must be greater than soft one" ); |
| 617 | return -EINVAL; |
| 618 | } |
| 619 | |
| 620 | if (!x->lft.soft_byte_limit || !x->lft.hard_byte_limit) { |
| 621 | NL_SET_ERR_MSG_MOD(extack, "Soft/hard byte limits can't be 0" ); |
| 622 | return -EINVAL; |
| 623 | } |
| 624 | |
| 625 | if (x->lft.soft_packet_limit >= x->lft.hard_packet_limit && |
| 626 | x->lft.hard_packet_limit != XFRM_INF) { |
| 627 | /* XFRM stack doesn't prevent such configuration :(. */ |
| 628 | NL_SET_ERR_MSG_MOD(extack, "Hard packet limit must be greater than soft one" ); |
| 629 | return -EINVAL; |
| 630 | } |
| 631 | |
| 632 | if (!x->lft.soft_packet_limit || !x->lft.hard_packet_limit) { |
| 633 | NL_SET_ERR_MSG_MOD(extack, "Soft/hard packet limits can't be 0" ); |
| 634 | return -EINVAL; |
| 635 | } |
| 636 | break; |
| 637 | default: |
| 638 | NL_SET_ERR_MSG_MOD(extack, "Unsupported xfrm offload type" ); |
| 639 | return -EINVAL; |
| 640 | } |
| 641 | return 0; |
| 642 | } |
| 643 | |
| 644 | static void mlx5e_ipsec_modify_state(struct work_struct *_work) |
| 645 | { |
| 646 | struct mlx5e_ipsec_work *work = |
| 647 | container_of(_work, struct mlx5e_ipsec_work, work); |
| 648 | struct mlx5e_ipsec_sa_entry *sa_entry = work->sa_entry; |
| 649 | struct mlx5_accel_esp_xfrm_attrs *attrs; |
| 650 | |
| 651 | attrs = &((struct mlx5e_ipsec_sa_entry *)work->data)->attrs; |
| 652 | |
| 653 | mlx5_accel_esp_modify_xfrm(sa_entry, attrs); |
| 654 | } |
| 655 | |
| 656 | static void mlx5e_ipsec_set_esn_ops(struct mlx5e_ipsec_sa_entry *sa_entry) |
| 657 | { |
| 658 | struct xfrm_state *x = sa_entry->x; |
| 659 | |
| 660 | if (x->xso.type != XFRM_DEV_OFFLOAD_CRYPTO || |
| 661 | x->xso.dir != XFRM_DEV_OFFLOAD_OUT) |
| 662 | return; |
| 663 | |
| 664 | if (x->props.flags & XFRM_STATE_ESN) { |
| 665 | sa_entry->set_iv_op = mlx5e_ipsec_set_iv_esn; |
| 666 | return; |
| 667 | } |
| 668 | |
| 669 | sa_entry->set_iv_op = mlx5e_ipsec_set_iv; |
| 670 | } |
| 671 | |
| 672 | static void mlx5e_ipsec_handle_netdev_event(struct work_struct *_work) |
| 673 | { |
| 674 | struct mlx5e_ipsec_work *work = |
| 675 | container_of(_work, struct mlx5e_ipsec_work, work); |
| 676 | struct mlx5e_ipsec_sa_entry *sa_entry = work->sa_entry; |
| 677 | struct mlx5e_ipsec_netevent_data *data = work->data; |
| 678 | struct mlx5_accel_esp_xfrm_attrs *attrs; |
| 679 | |
| 680 | attrs = &sa_entry->attrs; |
| 681 | |
| 682 | switch (attrs->dir) { |
| 683 | case XFRM_DEV_OFFLOAD_IN: |
| 684 | ether_addr_copy(dst: attrs->smac, src: data->addr); |
| 685 | break; |
| 686 | case XFRM_DEV_OFFLOAD_OUT: |
| 687 | ether_addr_copy(dst: attrs->dmac, src: data->addr); |
| 688 | break; |
| 689 | default: |
| 690 | WARN_ON_ONCE(true); |
| 691 | } |
| 692 | attrs->drop = false; |
| 693 | mlx5e_accel_ipsec_fs_modify(sa_entry); |
| 694 | } |
| 695 | |
| 696 | static int mlx5_ipsec_create_work(struct mlx5e_ipsec_sa_entry *sa_entry) |
| 697 | { |
| 698 | struct xfrm_state *x = sa_entry->x; |
| 699 | struct mlx5e_ipsec_work *work; |
| 700 | void *data = NULL; |
| 701 | |
| 702 | switch (x->xso.type) { |
| 703 | case XFRM_DEV_OFFLOAD_CRYPTO: |
| 704 | if (!(x->props.flags & XFRM_STATE_ESN)) |
| 705 | return 0; |
| 706 | break; |
| 707 | case XFRM_DEV_OFFLOAD_PACKET: |
| 708 | if (x->props.mode != XFRM_MODE_TUNNEL) |
| 709 | return 0; |
| 710 | break; |
| 711 | default: |
| 712 | break; |
| 713 | } |
| 714 | |
| 715 | work = kzalloc(sizeof(*work), GFP_KERNEL); |
| 716 | if (!work) |
| 717 | return -ENOMEM; |
| 718 | |
| 719 | switch (x->xso.type) { |
| 720 | case XFRM_DEV_OFFLOAD_CRYPTO: |
| 721 | data = kzalloc(sizeof(*sa_entry), GFP_KERNEL); |
| 722 | if (!data) |
| 723 | goto free_work; |
| 724 | |
| 725 | INIT_WORK(&work->work, mlx5e_ipsec_modify_state); |
| 726 | break; |
| 727 | case XFRM_DEV_OFFLOAD_PACKET: |
| 728 | data = kzalloc(sizeof(struct mlx5e_ipsec_netevent_data), |
| 729 | GFP_KERNEL); |
| 730 | if (!data) |
| 731 | goto free_work; |
| 732 | |
| 733 | INIT_WORK(&work->work, mlx5e_ipsec_handle_netdev_event); |
| 734 | break; |
| 735 | default: |
| 736 | break; |
| 737 | } |
| 738 | |
| 739 | work->data = data; |
| 740 | work->sa_entry = sa_entry; |
| 741 | sa_entry->work = work; |
| 742 | return 0; |
| 743 | |
| 744 | free_work: |
| 745 | kfree(objp: work); |
| 746 | return -ENOMEM; |
| 747 | } |
| 748 | |
| 749 | static int mlx5e_ipsec_create_dwork(struct mlx5e_ipsec_sa_entry *sa_entry) |
| 750 | { |
| 751 | struct xfrm_state *x = sa_entry->x; |
| 752 | struct mlx5e_ipsec_dwork *dwork; |
| 753 | |
| 754 | if (x->xso.type != XFRM_DEV_OFFLOAD_PACKET) |
| 755 | return 0; |
| 756 | |
| 757 | if (x->lft.soft_packet_limit == XFRM_INF && |
| 758 | x->lft.hard_packet_limit == XFRM_INF && |
| 759 | x->lft.soft_byte_limit == XFRM_INF && |
| 760 | x->lft.hard_byte_limit == XFRM_INF) |
| 761 | return 0; |
| 762 | |
| 763 | dwork = kzalloc(sizeof(*dwork), GFP_KERNEL); |
| 764 | if (!dwork) |
| 765 | return -ENOMEM; |
| 766 | |
| 767 | dwork->sa_entry = sa_entry; |
| 768 | INIT_DELAYED_WORK(&dwork->dwork, mlx5e_ipsec_handle_sw_limits); |
| 769 | sa_entry->dwork = dwork; |
| 770 | return 0; |
| 771 | } |
| 772 | |
| 773 | static int mlx5e_xfrm_add_state(struct net_device *dev, |
| 774 | struct xfrm_state *x, |
| 775 | struct netlink_ext_ack *extack) |
| 776 | { |
| 777 | struct mlx5e_ipsec_sa_entry *sa_entry = NULL; |
| 778 | bool allow_tunnel_mode = false; |
| 779 | struct mlx5e_ipsec *ipsec; |
| 780 | struct mlx5e_priv *priv; |
| 781 | gfp_t gfp; |
| 782 | int err; |
| 783 | |
| 784 | priv = netdev_priv(dev); |
| 785 | if (!priv->ipsec) |
| 786 | return -EOPNOTSUPP; |
| 787 | |
| 788 | ipsec = priv->ipsec; |
| 789 | gfp = (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) ? GFP_ATOMIC : GFP_KERNEL; |
| 790 | sa_entry = kzalloc(sizeof(*sa_entry), gfp); |
| 791 | if (!sa_entry) |
| 792 | return -ENOMEM; |
| 793 | |
| 794 | sa_entry->x = x; |
| 795 | sa_entry->dev = dev; |
| 796 | sa_entry->ipsec = ipsec; |
| 797 | /* Check if this SA is originated from acquire flow temporary SA */ |
| 798 | if (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) |
| 799 | goto out; |
| 800 | |
| 801 | err = mlx5e_xfrm_validate_state(mdev: priv->mdev, x, extack); |
| 802 | if (err) |
| 803 | goto err_xfrm; |
| 804 | |
| 805 | if (!mlx5_eswitch_block_ipsec(dev: priv->mdev)) { |
| 806 | err = -EBUSY; |
| 807 | goto err_xfrm; |
| 808 | } |
| 809 | |
| 810 | err = mlx5_eswitch_block_mode(dev: priv->mdev); |
| 811 | if (err) |
| 812 | goto unblock_ipsec; |
| 813 | |
| 814 | if (x->props.mode == XFRM_MODE_TUNNEL && |
| 815 | x->xso.type == XFRM_DEV_OFFLOAD_PACKET) { |
| 816 | allow_tunnel_mode = mlx5e_ipsec_fs_tunnel_allowed(sa_entry); |
| 817 | if (!allow_tunnel_mode) { |
| 818 | NL_SET_ERR_MSG_MOD(extack, |
| 819 | "Packet offload tunnel mode is disabled due to encap settings" ); |
| 820 | err = -EINVAL; |
| 821 | goto unblock_mode; |
| 822 | } |
| 823 | } |
| 824 | |
| 825 | /* check esn */ |
| 826 | if (x->props.flags & XFRM_STATE_ESN) |
| 827 | mlx5e_ipsec_update_esn_state(sa_entry); |
| 828 | else |
| 829 | /* According to RFC4303, section "3.3.3. Sequence Number Generation", |
| 830 | * the first packet sent using a given SA will contain a sequence |
| 831 | * number of 1. |
| 832 | */ |
| 833 | sa_entry->esn_state.esn = 1; |
| 834 | |
| 835 | mlx5e_ipsec_build_accel_xfrm_attrs(sa_entry, attrs: &sa_entry->attrs); |
| 836 | |
| 837 | err = mlx5_ipsec_create_work(sa_entry); |
| 838 | if (err) |
| 839 | goto unblock_encap; |
| 840 | |
| 841 | err = mlx5e_ipsec_create_dwork(sa_entry); |
| 842 | if (err) |
| 843 | goto release_work; |
| 844 | |
| 845 | /* create hw context */ |
| 846 | err = mlx5_ipsec_create_sa_ctx(sa_entry); |
| 847 | if (err) |
| 848 | goto release_dwork; |
| 849 | |
| 850 | err = mlx5e_accel_ipsec_fs_add_rule(sa_entry); |
| 851 | if (err) |
| 852 | goto err_hw_ctx; |
| 853 | |
| 854 | /* We use *_bh() variant because xfrm_timer_handler(), which runs |
| 855 | * in softirq context, can reach our state delete logic and we need |
| 856 | * xa_erase_bh() there. |
| 857 | */ |
| 858 | err = xa_insert_bh(xa: &ipsec->sadb, index: sa_entry->ipsec_obj_id, entry: sa_entry, |
| 859 | GFP_KERNEL); |
| 860 | if (err) |
| 861 | goto err_add_rule; |
| 862 | |
| 863 | mlx5e_ipsec_set_esn_ops(sa_entry); |
| 864 | |
| 865 | if (sa_entry->dwork) |
| 866 | queue_delayed_work(wq: ipsec->wq, dwork: &sa_entry->dwork->dwork, |
| 867 | MLX5_IPSEC_RESCHED); |
| 868 | |
| 869 | if (allow_tunnel_mode) { |
| 870 | xa_lock_bh(&ipsec->sadb); |
| 871 | __xa_set_mark(&ipsec->sadb, index: sa_entry->ipsec_obj_id, |
| 872 | MLX5E_IPSEC_TUNNEL_SA); |
| 873 | xa_unlock_bh(&ipsec->sadb); |
| 874 | } |
| 875 | |
| 876 | out: |
| 877 | x->xso.offload_handle = (unsigned long)sa_entry; |
| 878 | if (allow_tunnel_mode) |
| 879 | mlx5_eswitch_unblock_encap(dev: priv->mdev); |
| 880 | |
| 881 | mlx5_eswitch_unblock_mode(dev: priv->mdev); |
| 882 | |
| 883 | return 0; |
| 884 | |
| 885 | err_add_rule: |
| 886 | mlx5e_accel_ipsec_fs_del_rule(sa_entry); |
| 887 | err_hw_ctx: |
| 888 | mlx5_ipsec_free_sa_ctx(sa_entry); |
| 889 | release_dwork: |
| 890 | kfree(objp: sa_entry->dwork); |
| 891 | release_work: |
| 892 | if (sa_entry->work) |
| 893 | kfree(objp: sa_entry->work->data); |
| 894 | kfree(objp: sa_entry->work); |
| 895 | unblock_encap: |
| 896 | if (allow_tunnel_mode) |
| 897 | mlx5_eswitch_unblock_encap(dev: priv->mdev); |
| 898 | unblock_mode: |
| 899 | mlx5_eswitch_unblock_mode(dev: priv->mdev); |
| 900 | unblock_ipsec: |
| 901 | mlx5_eswitch_unblock_ipsec(dev: priv->mdev); |
| 902 | err_xfrm: |
| 903 | kfree(objp: sa_entry); |
| 904 | NL_SET_ERR_MSG_WEAK_MOD(extack, "Device failed to offload this state" ); |
| 905 | return err; |
| 906 | } |
| 907 | |
| 908 | static void mlx5e_xfrm_del_state(struct net_device *dev, struct xfrm_state *x) |
| 909 | { |
| 910 | struct mlx5e_ipsec_sa_entry *sa_entry = to_ipsec_sa_entry(x); |
| 911 | struct mlx5e_ipsec *ipsec = sa_entry->ipsec; |
| 912 | struct mlx5e_ipsec_sa_entry *old; |
| 913 | |
| 914 | if (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) |
| 915 | return; |
| 916 | |
| 917 | old = xa_erase_bh(xa: &ipsec->sadb, index: sa_entry->ipsec_obj_id); |
| 918 | WARN_ON(old != sa_entry); |
| 919 | } |
| 920 | |
| 921 | static void mlx5e_xfrm_free_state(struct net_device *dev, struct xfrm_state *x) |
| 922 | { |
| 923 | struct mlx5e_ipsec_sa_entry *sa_entry = to_ipsec_sa_entry(x); |
| 924 | struct mlx5e_ipsec *ipsec = sa_entry->ipsec; |
| 925 | |
| 926 | if (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) |
| 927 | goto sa_entry_free; |
| 928 | |
| 929 | if (sa_entry->work) |
| 930 | cancel_work_sync(work: &sa_entry->work->work); |
| 931 | |
| 932 | if (sa_entry->dwork) |
| 933 | cancel_delayed_work_sync(dwork: &sa_entry->dwork->dwork); |
| 934 | |
| 935 | mlx5e_accel_ipsec_fs_del_rule(sa_entry); |
| 936 | mlx5_ipsec_free_sa_ctx(sa_entry); |
| 937 | kfree(objp: sa_entry->dwork); |
| 938 | if (sa_entry->work) |
| 939 | kfree(objp: sa_entry->work->data); |
| 940 | kfree(objp: sa_entry->work); |
| 941 | mlx5_eswitch_unblock_ipsec(dev: ipsec->mdev); |
| 942 | sa_entry_free: |
| 943 | kfree(objp: sa_entry); |
| 944 | } |
| 945 | |
| 946 | static int mlx5e_ipsec_netevent_event(struct notifier_block *nb, |
| 947 | unsigned long event, void *ptr) |
| 948 | { |
| 949 | struct mlx5_accel_esp_xfrm_attrs *attrs; |
| 950 | struct mlx5e_ipsec_netevent_data *data; |
| 951 | struct mlx5e_ipsec_sa_entry *sa_entry; |
| 952 | struct mlx5e_ipsec *ipsec; |
| 953 | struct neighbour *n = ptr; |
| 954 | unsigned long idx; |
| 955 | |
| 956 | if (event != NETEVENT_NEIGH_UPDATE || !(n->nud_state & NUD_VALID)) |
| 957 | return NOTIFY_DONE; |
| 958 | |
| 959 | ipsec = container_of(nb, struct mlx5e_ipsec, netevent_nb); |
| 960 | xa_for_each_marked(&ipsec->sadb, idx, sa_entry, MLX5E_IPSEC_TUNNEL_SA) { |
| 961 | attrs = &sa_entry->attrs; |
| 962 | |
| 963 | if (attrs->addrs.family == AF_INET) { |
| 964 | if (!neigh_key_eq32(n, pkey: &attrs->addrs.saddr.a4) && |
| 965 | !neigh_key_eq32(n, pkey: &attrs->addrs.daddr.a4)) |
| 966 | continue; |
| 967 | } else { |
| 968 | if (!neigh_key_eq128(n, pkey: &attrs->addrs.saddr.a4) && |
| 969 | !neigh_key_eq128(n, pkey: &attrs->addrs.daddr.a4)) |
| 970 | continue; |
| 971 | } |
| 972 | |
| 973 | data = sa_entry->work->data; |
| 974 | |
| 975 | neigh_ha_snapshot(dst: data->addr, n, dev: sa_entry->dev); |
| 976 | queue_work(wq: ipsec->wq, work: &sa_entry->work->work); |
| 977 | } |
| 978 | |
| 979 | return NOTIFY_DONE; |
| 980 | } |
| 981 | |
| 982 | void mlx5e_ipsec_init(struct mlx5e_priv *priv) |
| 983 | { |
| 984 | struct mlx5e_ipsec *ipsec; |
| 985 | int ret = -ENOMEM; |
| 986 | |
| 987 | if (!mlx5_ipsec_device_caps(mdev: priv->mdev)) { |
| 988 | netdev_dbg(priv->netdev, "Not an IPSec offload device\n" ); |
| 989 | return; |
| 990 | } |
| 991 | |
| 992 | ipsec = kzalloc(sizeof(*ipsec), GFP_KERNEL); |
| 993 | if (!ipsec) |
| 994 | return; |
| 995 | |
| 996 | xa_init_flags(xa: &ipsec->sadb, XA_FLAGS_ALLOC); |
| 997 | ipsec->mdev = priv->mdev; |
| 998 | init_completion(x: &ipsec->comp); |
| 999 | ipsec->wq = alloc_workqueue("mlx5e_ipsec: %s" , WQ_UNBOUND, 0, |
| 1000 | priv->netdev->name); |
| 1001 | if (!ipsec->wq) |
| 1002 | goto err_wq; |
| 1003 | |
| 1004 | if (mlx5_ipsec_device_caps(mdev: priv->mdev) & |
| 1005 | MLX5_IPSEC_CAP_PACKET_OFFLOAD) { |
| 1006 | ret = mlx5e_ipsec_aso_init(ipsec); |
| 1007 | if (ret) |
| 1008 | goto err_aso; |
| 1009 | } |
| 1010 | |
| 1011 | if (mlx5_ipsec_device_caps(mdev: priv->mdev) & MLX5_IPSEC_CAP_TUNNEL) { |
| 1012 | ipsec->netevent_nb.notifier_call = mlx5e_ipsec_netevent_event; |
| 1013 | ret = register_netevent_notifier(nb: &ipsec->netevent_nb); |
| 1014 | if (ret) |
| 1015 | goto clear_aso; |
| 1016 | } |
| 1017 | |
| 1018 | ipsec->is_uplink_rep = mlx5e_is_uplink_rep(priv); |
| 1019 | ret = mlx5e_accel_ipsec_fs_init(ipsec, devcom: &priv->devcom); |
| 1020 | if (ret) |
| 1021 | goto err_fs_init; |
| 1022 | |
| 1023 | ipsec->fs = priv->fs; |
| 1024 | priv->ipsec = ipsec; |
| 1025 | netdev_dbg(priv->netdev, "IPSec attached to netdevice\n" ); |
| 1026 | return; |
| 1027 | |
| 1028 | err_fs_init: |
| 1029 | if (mlx5_ipsec_device_caps(mdev: priv->mdev) & MLX5_IPSEC_CAP_TUNNEL) |
| 1030 | unregister_netevent_notifier(nb: &ipsec->netevent_nb); |
| 1031 | clear_aso: |
| 1032 | if (mlx5_ipsec_device_caps(mdev: priv->mdev) & MLX5_IPSEC_CAP_PACKET_OFFLOAD) |
| 1033 | mlx5e_ipsec_aso_cleanup(ipsec); |
| 1034 | err_aso: |
| 1035 | destroy_workqueue(wq: ipsec->wq); |
| 1036 | err_wq: |
| 1037 | kfree(objp: ipsec); |
| 1038 | mlx5_core_err(priv->mdev, "IPSec initialization failed, %d\n" , ret); |
| 1039 | return; |
| 1040 | } |
| 1041 | |
| 1042 | void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv) |
| 1043 | { |
| 1044 | struct mlx5e_ipsec *ipsec = priv->ipsec; |
| 1045 | |
| 1046 | if (!ipsec) |
| 1047 | return; |
| 1048 | |
| 1049 | mlx5e_accel_ipsec_fs_cleanup(ipsec); |
| 1050 | if (ipsec->netevent_nb.notifier_call) { |
| 1051 | unregister_netevent_notifier(nb: &ipsec->netevent_nb); |
| 1052 | ipsec->netevent_nb.notifier_call = NULL; |
| 1053 | } |
| 1054 | if (ipsec->aso) |
| 1055 | mlx5e_ipsec_aso_cleanup(ipsec); |
| 1056 | destroy_workqueue(wq: ipsec->wq); |
| 1057 | kfree(objp: ipsec); |
| 1058 | priv->ipsec = NULL; |
| 1059 | } |
| 1060 | |
| 1061 | static void mlx5e_xfrm_advance_esn_state(struct xfrm_state *x) |
| 1062 | { |
| 1063 | struct mlx5e_ipsec_sa_entry *sa_entry = to_ipsec_sa_entry(x); |
| 1064 | struct mlx5e_ipsec_work *work = sa_entry->work; |
| 1065 | struct mlx5e_ipsec_sa_entry *sa_entry_shadow; |
| 1066 | bool need_update; |
| 1067 | |
| 1068 | need_update = mlx5e_ipsec_update_esn_state(sa_entry); |
| 1069 | if (!need_update) |
| 1070 | return; |
| 1071 | |
| 1072 | sa_entry_shadow = work->data; |
| 1073 | memset(sa_entry_shadow, 0x00, sizeof(*sa_entry_shadow)); |
| 1074 | mlx5e_ipsec_build_accel_xfrm_attrs(sa_entry, attrs: &sa_entry_shadow->attrs); |
| 1075 | queue_work(wq: sa_entry->ipsec->wq, work: &work->work); |
| 1076 | } |
| 1077 | |
| 1078 | static void mlx5e_xfrm_update_stats(struct xfrm_state *x) |
| 1079 | { |
| 1080 | struct mlx5e_ipsec_sa_entry *sa_entry = to_ipsec_sa_entry(x); |
| 1081 | struct mlx5e_ipsec_rule *ipsec_rule = &sa_entry->ipsec_rule; |
| 1082 | struct net *net = dev_net(dev: x->xso.dev); |
| 1083 | u64 trailer_packets = 0, trailer_bytes = 0; |
| 1084 | u64 replay_packets = 0, replay_bytes = 0; |
| 1085 | u64 auth_packets = 0, auth_bytes = 0; |
| 1086 | u64 success_packets, success_bytes; |
| 1087 | u64 packets, bytes, lastuse; |
| 1088 | size_t ; |
| 1089 | |
| 1090 | lockdep_assert(lockdep_is_held(&x->lock) || |
| 1091 | lockdep_is_held(&net->xfrm.xfrm_cfg_mutex) || |
| 1092 | lockdep_is_held(&net->xfrm.xfrm_state_lock)); |
| 1093 | |
| 1094 | if (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) |
| 1095 | return; |
| 1096 | |
| 1097 | if (sa_entry->attrs.dir == XFRM_DEV_OFFLOAD_IN) { |
| 1098 | mlx5_fc_query_cached(counter: ipsec_rule->auth.fc, bytes: &auth_bytes, |
| 1099 | packets: &auth_packets, lastuse: &lastuse); |
| 1100 | x->stats.integrity_failed += auth_packets; |
| 1101 | XFRM_ADD_STATS(net, LINUX_MIB_XFRMINSTATEPROTOERROR, auth_packets); |
| 1102 | |
| 1103 | mlx5_fc_query_cached(counter: ipsec_rule->trailer.fc, bytes: &trailer_bytes, |
| 1104 | packets: &trailer_packets, lastuse: &lastuse); |
| 1105 | XFRM_ADD_STATS(net, LINUX_MIB_XFRMINHDRERROR, trailer_packets); |
| 1106 | } |
| 1107 | |
| 1108 | if (x->xso.type != XFRM_DEV_OFFLOAD_PACKET) |
| 1109 | return; |
| 1110 | |
| 1111 | if (sa_entry->attrs.dir == XFRM_DEV_OFFLOAD_IN) { |
| 1112 | mlx5_fc_query_cached(counter: ipsec_rule->replay.fc, bytes: &replay_bytes, |
| 1113 | packets: &replay_packets, lastuse: &lastuse); |
| 1114 | x->stats.replay += replay_packets; |
| 1115 | XFRM_ADD_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR, replay_packets); |
| 1116 | } |
| 1117 | |
| 1118 | mlx5_fc_query_cached(counter: ipsec_rule->fc, bytes: &bytes, packets: &packets, lastuse: &lastuse); |
| 1119 | success_packets = packets - auth_packets - trailer_packets - replay_packets; |
| 1120 | x->curlft.packets += success_packets; |
| 1121 | /* NIC counts all bytes passed through flow steering and doesn't have |
| 1122 | * an ability to count payload data size which is needed for SA. |
| 1123 | * |
| 1124 | * To overcome HW limitestion, let's approximate the payload size |
| 1125 | * by removing always available headers. |
| 1126 | */ |
| 1127 | headers = sizeof(struct ethhdr); |
| 1128 | if (sa_entry->attrs.addrs.family == AF_INET) |
| 1129 | headers += sizeof(struct iphdr); |
| 1130 | else |
| 1131 | headers += sizeof(struct ipv6hdr); |
| 1132 | |
| 1133 | success_bytes = bytes - auth_bytes - trailer_bytes - replay_bytes; |
| 1134 | x->curlft.bytes += success_bytes - headers * success_packets; |
| 1135 | } |
| 1136 | |
| 1137 | static __be32 word_to_mask(int prefix) |
| 1138 | { |
| 1139 | if (prefix < 0) |
| 1140 | return 0; |
| 1141 | |
| 1142 | if (!prefix || prefix > 31) |
| 1143 | return cpu_to_be32(0xFFFFFFFF); |
| 1144 | |
| 1145 | return cpu_to_be32(((1U << prefix) - 1) << (32 - prefix)); |
| 1146 | } |
| 1147 | |
| 1148 | static void mlx5e_ipsec_policy_mask(struct mlx5e_ipsec_addr *addrs, |
| 1149 | struct xfrm_selector *sel) |
| 1150 | { |
| 1151 | int i; |
| 1152 | |
| 1153 | if (addrs->family == AF_INET) { |
| 1154 | addrs->smask.m4 = word_to_mask(prefix: sel->prefixlen_s); |
| 1155 | addrs->saddr.a4 &= addrs->smask.m4; |
| 1156 | addrs->dmask.m4 = word_to_mask(prefix: sel->prefixlen_d); |
| 1157 | addrs->daddr.a4 &= addrs->dmask.m4; |
| 1158 | return; |
| 1159 | } |
| 1160 | |
| 1161 | for (i = 0; i < 4; i++) { |
| 1162 | if (sel->prefixlen_s != 32 * i) |
| 1163 | addrs->smask.m6[i] = |
| 1164 | word_to_mask(prefix: sel->prefixlen_s - 32 * i); |
| 1165 | addrs->saddr.a6[i] &= addrs->smask.m6[i]; |
| 1166 | |
| 1167 | if (sel->prefixlen_d != 32 * i) |
| 1168 | addrs->dmask.m6[i] = |
| 1169 | word_to_mask(prefix: sel->prefixlen_d - 32 * i); |
| 1170 | addrs->daddr.a6[i] &= addrs->dmask.m6[i]; |
| 1171 | } |
| 1172 | } |
| 1173 | |
| 1174 | static int mlx5e_xfrm_validate_policy(struct mlx5_core_dev *mdev, |
| 1175 | struct xfrm_policy *x, |
| 1176 | struct netlink_ext_ack *extack) |
| 1177 | { |
| 1178 | struct xfrm_selector *sel = &x->selector; |
| 1179 | |
| 1180 | if (x->type != XFRM_POLICY_TYPE_MAIN) { |
| 1181 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload non-main policy types" ); |
| 1182 | return -EINVAL; |
| 1183 | } |
| 1184 | |
| 1185 | /* Please pay attention that we support only one template */ |
| 1186 | if (x->xfrm_nr > 1) { |
| 1187 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload more than one template" ); |
| 1188 | return -EINVAL; |
| 1189 | } |
| 1190 | |
| 1191 | if (x->xdo.dir != XFRM_DEV_OFFLOAD_IN && |
| 1192 | x->xdo.dir != XFRM_DEV_OFFLOAD_OUT) { |
| 1193 | NL_SET_ERR_MSG_MOD(extack, "Cannot offload forward policy" ); |
| 1194 | return -EINVAL; |
| 1195 | } |
| 1196 | |
| 1197 | if (!x->xfrm_vec[0].reqid && sel->proto == IPPROTO_IP && |
| 1198 | addr6_all_zero(addr6: sel->saddr.a6) && addr6_all_zero(addr6: sel->daddr.a6)) { |
| 1199 | NL_SET_ERR_MSG_MOD(extack, "Unsupported policy with reqid 0 without at least one of upper protocol or ip addr(s) different than 0" ); |
| 1200 | return -EINVAL; |
| 1201 | } |
| 1202 | |
| 1203 | if (x->xdo.type != XFRM_DEV_OFFLOAD_PACKET) { |
| 1204 | NL_SET_ERR_MSG_MOD(extack, "Unsupported xfrm offload type" ); |
| 1205 | return -EINVAL; |
| 1206 | } |
| 1207 | |
| 1208 | if (x->selector.proto != IPPROTO_IP && |
| 1209 | x->selector.proto != IPPROTO_UDP && |
| 1210 | x->selector.proto != IPPROTO_TCP) { |
| 1211 | NL_SET_ERR_MSG_MOD(extack, "Device does not support upper protocol other than TCP/UDP" ); |
| 1212 | return -EINVAL; |
| 1213 | } |
| 1214 | |
| 1215 | if (x->priority) { |
| 1216 | if (!(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_PRIO)) { |
| 1217 | NL_SET_ERR_MSG_MOD(extack, "Device does not support policy priority" ); |
| 1218 | return -EINVAL; |
| 1219 | } |
| 1220 | |
| 1221 | if (x->priority == U32_MAX) { |
| 1222 | NL_SET_ERR_MSG_MOD(extack, "Device does not support requested policy priority" ); |
| 1223 | return -EINVAL; |
| 1224 | } |
| 1225 | } |
| 1226 | |
| 1227 | if (x->xdo.type == XFRM_DEV_OFFLOAD_PACKET && |
| 1228 | !(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_PACKET_OFFLOAD)) { |
| 1229 | NL_SET_ERR_MSG_MOD(extack, "Packet offload is not supported" ); |
| 1230 | return -EINVAL; |
| 1231 | } |
| 1232 | |
| 1233 | return 0; |
| 1234 | } |
| 1235 | |
| 1236 | static void |
| 1237 | mlx5e_ipsec_build_accel_pol_attrs(struct mlx5e_ipsec_pol_entry *pol_entry, |
| 1238 | struct mlx5_accel_pol_xfrm_attrs *attrs) |
| 1239 | { |
| 1240 | struct xfrm_policy *x = pol_entry->x; |
| 1241 | struct xfrm_selector *sel; |
| 1242 | |
| 1243 | sel = &x->selector; |
| 1244 | memset(attrs, 0, sizeof(*attrs)); |
| 1245 | |
| 1246 | memcpy(&attrs->addrs.saddr, sel->saddr.a6, sizeof(attrs->addrs.saddr)); |
| 1247 | memcpy(&attrs->addrs.daddr, sel->daddr.a6, sizeof(attrs->addrs.daddr)); |
| 1248 | attrs->addrs.family = sel->family; |
| 1249 | mlx5e_ipsec_policy_mask(addrs: &attrs->addrs, sel); |
| 1250 | attrs->dir = x->xdo.dir; |
| 1251 | attrs->action = x->action; |
| 1252 | attrs->type = XFRM_DEV_OFFLOAD_PACKET; |
| 1253 | attrs->reqid = x->xfrm_vec[0].reqid; |
| 1254 | attrs->upspec.dport = ntohs(sel->dport); |
| 1255 | attrs->upspec.dport_mask = ntohs(sel->dport_mask); |
| 1256 | attrs->upspec.sport = ntohs(sel->sport); |
| 1257 | attrs->upspec.sport_mask = ntohs(sel->sport_mask); |
| 1258 | attrs->upspec.proto = sel->proto; |
| 1259 | attrs->prio = x->priority; |
| 1260 | } |
| 1261 | |
| 1262 | static int mlx5e_xfrm_add_policy(struct xfrm_policy *x, |
| 1263 | struct netlink_ext_ack *extack) |
| 1264 | { |
| 1265 | struct net_device *netdev = x->xdo.dev; |
| 1266 | struct mlx5e_ipsec_pol_entry *pol_entry; |
| 1267 | struct mlx5e_priv *priv; |
| 1268 | int err; |
| 1269 | |
| 1270 | priv = netdev_priv(dev: netdev); |
| 1271 | if (!priv->ipsec) { |
| 1272 | NL_SET_ERR_MSG_MOD(extack, "Device doesn't support IPsec packet offload" ); |
| 1273 | return -EOPNOTSUPP; |
| 1274 | } |
| 1275 | |
| 1276 | err = mlx5e_xfrm_validate_policy(mdev: priv->mdev, x, extack); |
| 1277 | if (err) |
| 1278 | return err; |
| 1279 | |
| 1280 | pol_entry = kzalloc(sizeof(*pol_entry), GFP_KERNEL); |
| 1281 | if (!pol_entry) |
| 1282 | return -ENOMEM; |
| 1283 | |
| 1284 | pol_entry->x = x; |
| 1285 | pol_entry->ipsec = priv->ipsec; |
| 1286 | |
| 1287 | if (!mlx5_eswitch_block_ipsec(dev: priv->mdev)) { |
| 1288 | err = -EBUSY; |
| 1289 | goto ipsec_busy; |
| 1290 | } |
| 1291 | |
| 1292 | mlx5e_ipsec_build_accel_pol_attrs(pol_entry, attrs: &pol_entry->attrs); |
| 1293 | err = mlx5e_accel_ipsec_fs_add_pol(pol_entry); |
| 1294 | if (err) |
| 1295 | goto err_fs; |
| 1296 | |
| 1297 | x->xdo.offload_handle = (unsigned long)pol_entry; |
| 1298 | return 0; |
| 1299 | |
| 1300 | err_fs: |
| 1301 | mlx5_eswitch_unblock_ipsec(dev: priv->mdev); |
| 1302 | ipsec_busy: |
| 1303 | kfree(objp: pol_entry); |
| 1304 | NL_SET_ERR_MSG_MOD(extack, "Device failed to offload this policy" ); |
| 1305 | return err; |
| 1306 | } |
| 1307 | |
| 1308 | static void mlx5e_xfrm_del_policy(struct xfrm_policy *x) |
| 1309 | { |
| 1310 | struct mlx5e_ipsec_pol_entry *pol_entry = to_ipsec_pol_entry(x); |
| 1311 | |
| 1312 | mlx5e_accel_ipsec_fs_del_pol(pol_entry); |
| 1313 | mlx5_eswitch_unblock_ipsec(dev: pol_entry->ipsec->mdev); |
| 1314 | } |
| 1315 | |
| 1316 | static void mlx5e_xfrm_free_policy(struct xfrm_policy *x) |
| 1317 | { |
| 1318 | struct mlx5e_ipsec_pol_entry *pol_entry = to_ipsec_pol_entry(x); |
| 1319 | |
| 1320 | kfree(objp: pol_entry); |
| 1321 | } |
| 1322 | |
| 1323 | static const struct xfrmdev_ops mlx5e_ipsec_xfrmdev_ops = { |
| 1324 | .xdo_dev_state_add = mlx5e_xfrm_add_state, |
| 1325 | .xdo_dev_state_delete = mlx5e_xfrm_del_state, |
| 1326 | .xdo_dev_state_free = mlx5e_xfrm_free_state, |
| 1327 | .xdo_dev_state_advance_esn = mlx5e_xfrm_advance_esn_state, |
| 1328 | |
| 1329 | .xdo_dev_state_update_stats = mlx5e_xfrm_update_stats, |
| 1330 | .xdo_dev_policy_add = mlx5e_xfrm_add_policy, |
| 1331 | .xdo_dev_policy_delete = mlx5e_xfrm_del_policy, |
| 1332 | .xdo_dev_policy_free = mlx5e_xfrm_free_policy, |
| 1333 | }; |
| 1334 | |
| 1335 | void mlx5e_ipsec_build_netdev(struct mlx5e_priv *priv) |
| 1336 | { |
| 1337 | struct mlx5_core_dev *mdev = priv->mdev; |
| 1338 | struct net_device *netdev = priv->netdev; |
| 1339 | |
| 1340 | if (!mlx5_ipsec_device_caps(mdev)) |
| 1341 | return; |
| 1342 | |
| 1343 | mlx5_core_info(mdev, "mlx5e: IPSec ESP acceleration enabled\n" ); |
| 1344 | |
| 1345 | netdev->xfrmdev_ops = &mlx5e_ipsec_xfrmdev_ops; |
| 1346 | netdev->features |= NETIF_F_HW_ESP; |
| 1347 | netdev->hw_enc_features |= NETIF_F_HW_ESP; |
| 1348 | |
| 1349 | if (!MLX5_CAP_ETH(mdev, swp_csum)) { |
| 1350 | mlx5_core_dbg(mdev, "mlx5e: SWP checksum not supported\n" ); |
| 1351 | return; |
| 1352 | } |
| 1353 | |
| 1354 | netdev->features |= NETIF_F_HW_ESP_TX_CSUM; |
| 1355 | netdev->hw_enc_features |= NETIF_F_HW_ESP_TX_CSUM; |
| 1356 | |
| 1357 | if (!MLX5_CAP_ETH(mdev, swp_lso)) { |
| 1358 | mlx5_core_dbg(mdev, "mlx5e: ESP LSO not supported\n" ); |
| 1359 | return; |
| 1360 | } |
| 1361 | |
| 1362 | netdev->gso_partial_features |= NETIF_F_GSO_ESP; |
| 1363 | mlx5_core_dbg(mdev, "mlx5e: ESP GSO capability turned on\n" ); |
| 1364 | netdev->features |= NETIF_F_GSO_ESP; |
| 1365 | netdev->hw_features |= NETIF_F_GSO_ESP; |
| 1366 | netdev->hw_enc_features |= NETIF_F_GSO_ESP; |
| 1367 | } |
| 1368 | |