1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2011-2014 Freescale Semiconductor, Inc.
4 * Copyright 2011 Linaro Ltd.
5 */
6
7#include <linux/clk/imx.h>
8#include <linux/delay.h>
9#include <linux/init.h>
10#include <linux/io.h>
11#include <linux/irq.h>
12#include <linux/genalloc.h>
13#include <linux/irqchip/arm-gic.h>
14#include <linux/mfd/syscon.h>
15#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
16#include <linux/of.h>
17#include <linux/of_address.h>
18#include <linux/of_platform.h>
19#include <linux/platform_device.h>
20#include <linux/regmap.h>
21#include <linux/suspend.h>
22#include <asm/cacheflush.h>
23#include <asm/fncpy.h>
24#include <asm/proc-fns.h>
25#include <asm/suspend.h>
26#include <asm/tlb.h>
27
28#include "common.h"
29#include "hardware.h"
30
31#define CCR 0x0
32#define BM_CCR_WB_COUNT (0x7 << 16)
33#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
34#define BM_CCR_RBC_EN (0x1 << 27)
35
36#define CLPCR 0x54
37#define BP_CLPCR_LPM 0
38#define BM_CLPCR_LPM (0x3 << 0)
39#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
40#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
41#define BM_CLPCR_SBYOS (0x1 << 6)
42#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
43#define BM_CLPCR_VSTBY (0x1 << 8)
44#define BP_CLPCR_STBY_COUNT 9
45#define BM_CLPCR_STBY_COUNT (0x3 << 9)
46#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
47#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
48#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
49#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
50#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
51#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
52#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
53#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
54#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
55#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
56#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
57
58#define CGPR 0x64
59#define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17)
60
61#define MX6Q_SUSPEND_OCRAM_SIZE 0x1000
62#define MX6_MAX_MMDC_IO_NUM 33
63
64static void __iomem *ccm_base;
65static void __iomem *suspend_ocram_base;
66static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
67
68/*
69 * suspend ocram space layout:
70 * ======================== high address ======================
71 * .
72 * .
73 * .
74 * ^
75 * ^
76 * ^
77 * imx6_suspend code
78 * PM_INFO structure(imx6_cpu_pm_info)
79 * ======================== low address =======================
80 */
81
82struct imx6_pm_base {
83 phys_addr_t pbase;
84 void __iomem *vbase;
85};
86
87struct imx6_pm_socdata {
88 u32 ddr_type;
89 const char *mmdc_compat;
90 const char *src_compat;
91 const char *iomuxc_compat;
92 const char *gpc_compat;
93 const char *pl310_compat;
94 const u32 mmdc_io_num;
95 const u32 *mmdc_io_offset;
96};
97
98static const u32 imx6q_mmdc_io_offset[] __initconst = {
99 0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
100 0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
101 0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
102 0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
103 0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
104 0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
105 0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
106 0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
107 0x74c, /* GPR_ADDS */
108};
109
110static const u32 imx6dl_mmdc_io_offset[] __initconst = {
111 0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
112 0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
113 0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
114 0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
115 0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
116 0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
117 0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
118 0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
119 0x74c, /* GPR_ADDS */
120};
121
122static const u32 imx6sl_mmdc_io_offset[] __initconst = {
123 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
124 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
125 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
126 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
127 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */
128};
129
130static const u32 imx6sll_mmdc_io_offset[] __initconst = {
131 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */
132 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */
133 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */
134 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/
135};
136
137static const u32 imx6sx_mmdc_io_offset[] __initconst = {
138 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
139 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
140 0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
141 0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
142 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
143};
144
145static const u32 imx6ul_mmdc_io_offset[] __initconst = {
146 0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
147 0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
148 0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
149 0x494, 0x4b0, /* MODE_CTL, MODE, */
150};
151
152static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
153 .mmdc_compat = "fsl,imx6q-mmdc",
154 .src_compat = "fsl,imx6q-src",
155 .iomuxc_compat = "fsl,imx6q-iomuxc",
156 .gpc_compat = "fsl,imx6q-gpc",
157 .pl310_compat = "arm,pl310-cache",
158 .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
159 .mmdc_io_offset = imx6q_mmdc_io_offset,
160};
161
162static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
163 .mmdc_compat = "fsl,imx6q-mmdc",
164 .src_compat = "fsl,imx6q-src",
165 .iomuxc_compat = "fsl,imx6dl-iomuxc",
166 .gpc_compat = "fsl,imx6q-gpc",
167 .pl310_compat = "arm,pl310-cache",
168 .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
169 .mmdc_io_offset = imx6dl_mmdc_io_offset,
170};
171
172static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
173 .mmdc_compat = "fsl,imx6sl-mmdc",
174 .src_compat = "fsl,imx6sl-src",
175 .iomuxc_compat = "fsl,imx6sl-iomuxc",
176 .gpc_compat = "fsl,imx6sl-gpc",
177 .pl310_compat = "arm,pl310-cache",
178 .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
179 .mmdc_io_offset = imx6sl_mmdc_io_offset,
180};
181
182static const struct imx6_pm_socdata imx6sll_pm_data __initconst = {
183 .mmdc_compat = "fsl,imx6sll-mmdc",
184 .src_compat = "fsl,imx6sll-src",
185 .iomuxc_compat = "fsl,imx6sll-iomuxc",
186 .gpc_compat = "fsl,imx6sll-gpc",
187 .pl310_compat = "arm,pl310-cache",
188 .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset),
189 .mmdc_io_offset = imx6sll_mmdc_io_offset,
190};
191
192static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
193 .mmdc_compat = "fsl,imx6sx-mmdc",
194 .src_compat = "fsl,imx6sx-src",
195 .iomuxc_compat = "fsl,imx6sx-iomuxc",
196 .gpc_compat = "fsl,imx6sx-gpc",
197 .pl310_compat = "arm,pl310-cache",
198 .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
199 .mmdc_io_offset = imx6sx_mmdc_io_offset,
200};
201
202static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
203 .mmdc_compat = "fsl,imx6ul-mmdc",
204 .src_compat = "fsl,imx6ul-src",
205 .iomuxc_compat = "fsl,imx6ul-iomuxc",
206 .gpc_compat = "fsl,imx6ul-gpc",
207 .pl310_compat = NULL,
208 .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
209 .mmdc_io_offset = imx6ul_mmdc_io_offset,
210};
211
212/*
213 * This structure is for passing necessary data for low level ocram
214 * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
215 * definition is changed, the offset definition in
216 * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
217 * otherwise, the suspend to ocram function will be broken!
218 */
219struct imx6_cpu_pm_info {
220 phys_addr_t pbase; /* The physical address of pm_info. */
221 phys_addr_t resume_addr; /* The physical resume address for asm code */
222 u32 ddr_type;
223 u32 pm_info_size; /* Size of pm_info. */
224 struct imx6_pm_base mmdc_base;
225 struct imx6_pm_base src_base;
226 struct imx6_pm_base iomuxc_base;
227 struct imx6_pm_base ccm_base;
228 struct imx6_pm_base gpc_base;
229 struct imx6_pm_base l2_base;
230 u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
231 u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
232} __aligned(8);
233
234void imx6_set_int_mem_clk_lpm(bool enable)
235{
236 u32 val = readl_relaxed(ccm_base + CGPR);
237
238 val &= ~BM_CGPR_INT_MEM_CLK_LPM;
239 if (enable)
240 val |= BM_CGPR_INT_MEM_CLK_LPM;
241 writel_relaxed(val, ccm_base + CGPR);
242}
243
244void imx6_enable_rbc(bool enable)
245{
246 u32 val;
247
248 /*
249 * need to mask all interrupts in GPC before
250 * operating RBC configurations
251 */
252 imx_gpc_mask_all();
253
254 /* configure RBC enable bit */
255 val = readl_relaxed(ccm_base + CCR);
256 val &= ~BM_CCR_RBC_EN;
257 val |= enable ? BM_CCR_RBC_EN : 0;
258 writel_relaxed(val, ccm_base + CCR);
259
260 /* configure RBC count */
261 val = readl_relaxed(ccm_base + CCR);
262 val &= ~BM_CCR_RBC_BYPASS_COUNT;
263 val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
264 writel(val, addr: ccm_base + CCR);
265
266 /*
267 * need to delay at least 2 cycles of CKIL(32K)
268 * due to hardware design requirement, which is
269 * ~61us, here we use 65us for safe
270 */
271 udelay(65);
272
273 /* restore GPC interrupt mask settings */
274 imx_gpc_restore_all();
275}
276
277static void imx6q_enable_wb(bool enable)
278{
279 u32 val;
280
281 /* configure well bias enable bit */
282 val = readl_relaxed(ccm_base + CLPCR);
283 val &= ~BM_CLPCR_WB_PER_AT_LPM;
284 val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
285 writel_relaxed(val, ccm_base + CLPCR);
286
287 /* configure well bias count */
288 val = readl_relaxed(ccm_base + CCR);
289 val &= ~BM_CCR_WB_COUNT;
290 val |= enable ? BM_CCR_WB_COUNT : 0;
291 writel_relaxed(val, ccm_base + CCR);
292}
293
294int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
295{
296 u32 val = readl_relaxed(ccm_base + CLPCR);
297
298 val &= ~BM_CLPCR_LPM;
299 switch (mode) {
300 case WAIT_CLOCKED:
301 break;
302 case WAIT_UNCLOCKED:
303 val |= 0x1 << BP_CLPCR_LPM;
304 val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
305 break;
306 case STOP_POWER_ON:
307 val |= 0x2 << BP_CLPCR_LPM;
308 val &= ~BM_CLPCR_VSTBY;
309 val &= ~BM_CLPCR_SBYOS;
310 if (cpu_is_imx6sl())
311 val |= BM_CLPCR_BYPASS_PMIC_READY;
312 if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
313 cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
314 val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
315 else
316 val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
317 break;
318 case WAIT_UNCLOCKED_POWER_OFF:
319 val |= 0x1 << BP_CLPCR_LPM;
320 val &= ~BM_CLPCR_VSTBY;
321 val &= ~BM_CLPCR_SBYOS;
322 break;
323 case STOP_POWER_OFF:
324 val |= 0x2 << BP_CLPCR_LPM;
325 val |= 0x3 << BP_CLPCR_STBY_COUNT;
326 val |= BM_CLPCR_VSTBY;
327 val |= BM_CLPCR_SBYOS;
328 if (cpu_is_imx6sl() || cpu_is_imx6sx())
329 val |= BM_CLPCR_BYPASS_PMIC_READY;
330 if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
331 cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
332 val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
333 else
334 val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
335 break;
336 default:
337 return -EINVAL;
338 }
339
340 /*
341 * ERR007265: CCM: When improper low-power sequence is used,
342 * the SoC enters low power mode before the ARM core executes WFI.
343 *
344 * Software workaround:
345 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
346 * by setting IOMUX_GPR1_GINT.
347 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
348 * Low-Power mode.
349 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
350 * is set (set bits 0-1 of CCM_CLPCR).
351 *
352 * Note that IRQ #32 is GIC SPI #0.
353 */
354 if (mode != WAIT_CLOCKED)
355 imx_gpc_hwirq_unmask(hwirq: 0);
356 writel_relaxed(val, ccm_base + CLPCR);
357 if (mode != WAIT_CLOCKED)
358 imx_gpc_hwirq_mask(hwirq: 0);
359
360 return 0;
361}
362
363static int imx6q_suspend_finish(unsigned long val)
364{
365 if (!imx6_suspend_in_ocram_fn) {
366 cpu_do_idle();
367 } else {
368 /*
369 * call low level suspend function in ocram,
370 * as we need to float DDR IO.
371 */
372 local_flush_tlb_all();
373 /* check if need to flush internal L2 cache */
374 if (!((struct imx6_cpu_pm_info *)
375 suspend_ocram_base)->l2_base.vbase)
376 flush_cache_all();
377 imx6_suspend_in_ocram_fn(suspend_ocram_base);
378 }
379
380 return 0;
381}
382
383static int imx6q_pm_enter(suspend_state_t state)
384{
385 switch (state) {
386 case PM_SUSPEND_STANDBY:
387 imx6_set_lpm(mode: STOP_POWER_ON);
388 imx6_set_int_mem_clk_lpm(enable: true);
389 imx_gpc_pre_suspend(arm_power_off: false);
390 if (cpu_is_imx6sl())
391 imx6sl_set_wait_clk(enter: true);
392 /* Zzz ... */
393 cpu_do_idle();
394 if (cpu_is_imx6sl())
395 imx6sl_set_wait_clk(enter: false);
396 imx_gpc_post_resume();
397 imx6_set_lpm(mode: WAIT_CLOCKED);
398 break;
399 case PM_SUSPEND_MEM:
400 imx6_set_lpm(mode: STOP_POWER_OFF);
401 imx6_set_int_mem_clk_lpm(enable: false);
402 imx6q_enable_wb(enable: true);
403 /*
404 * For suspend into ocram, asm code already take care of
405 * RBC setting, so we do NOT need to do that here.
406 */
407 if (!imx6_suspend_in_ocram_fn)
408 imx6_enable_rbc(enable: true);
409 imx_gpc_pre_suspend(arm_power_off: true);
410 imx_anatop_pre_suspend();
411 /* Zzz ... */
412 cpu_suspend(0, imx6q_suspend_finish);
413 if (cpu_is_imx6q() || cpu_is_imx6dl())
414 imx_smp_prepare();
415 imx_anatop_post_resume();
416 imx_gpc_post_resume();
417 imx6_enable_rbc(enable: false);
418 imx6q_enable_wb(enable: false);
419 imx6_set_int_mem_clk_lpm(enable: true);
420 imx6_set_lpm(mode: WAIT_CLOCKED);
421 break;
422 default:
423 return -EINVAL;
424 }
425
426 return 0;
427}
428
429static int imx6q_pm_valid(suspend_state_t state)
430{
431 return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
432}
433
434static const struct platform_suspend_ops imx6q_pm_ops = {
435 .enter = imx6q_pm_enter,
436 .valid = imx6q_pm_valid,
437};
438
439static int __init imx6_pm_get_base(struct imx6_pm_base *base,
440 const char *compat)
441{
442 struct device_node *node;
443 struct resource res;
444 int ret = 0;
445
446 node = of_find_compatible_node(NULL, NULL, compat);
447 if (!node)
448 return -ENODEV;
449
450 ret = of_address_to_resource(dev: node, index: 0, r: &res);
451 if (ret)
452 goto put_node;
453
454 base->pbase = res.start;
455 base->vbase = ioremap(offset: res.start, size: resource_size(res: &res));
456 if (!base->vbase)
457 ret = -ENOMEM;
458
459put_node:
460 of_node_put(node);
461 return ret;
462}
463
464static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
465{
466 phys_addr_t ocram_pbase;
467 struct device_node *node;
468 struct platform_device *pdev;
469 struct imx6_cpu_pm_info *pm_info;
470 struct gen_pool *ocram_pool;
471 unsigned long ocram_base;
472 int i, ret = 0;
473 const u32 *mmdc_offset_array;
474
475 suspend_set_ops(ops: &imx6q_pm_ops);
476
477 if (!socdata) {
478 pr_warn("%s: invalid argument!\n", __func__);
479 return -EINVAL;
480 }
481
482 node = of_find_compatible_node(NULL, NULL, compat: "mmio-sram");
483 if (!node) {
484 pr_warn("%s: failed to find ocram node!\n", __func__);
485 return -ENODEV;
486 }
487
488 pdev = of_find_device_by_node(np: node);
489 if (!pdev) {
490 pr_warn("%s: failed to find ocram device!\n", __func__);
491 ret = -ENODEV;
492 goto put_node;
493 }
494
495 ocram_pool = gen_pool_get(dev: &pdev->dev, NULL);
496 if (!ocram_pool) {
497 pr_warn("%s: ocram pool unavailable!\n", __func__);
498 ret = -ENODEV;
499 goto put_device;
500 }
501
502 ocram_base = gen_pool_alloc(pool: ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
503 if (!ocram_base) {
504 pr_warn("%s: unable to alloc ocram!\n", __func__);
505 ret = -ENOMEM;
506 goto put_device;
507 }
508
509 ocram_pbase = gen_pool_virt_to_phys(pool: ocram_pool, ocram_base);
510
511 suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
512 MX6Q_SUSPEND_OCRAM_SIZE, false);
513
514 memset(suspend_ocram_base, 0, sizeof(*pm_info));
515 pm_info = suspend_ocram_base;
516 pm_info->pbase = ocram_pbase;
517 pm_info->resume_addr = __pa_symbol(v7_cpu_resume);
518 pm_info->pm_info_size = sizeof(*pm_info);
519
520 /*
521 * ccm physical address is not used by asm code currently,
522 * so get ccm virtual address directly.
523 */
524 pm_info->ccm_base.vbase = ccm_base;
525
526 ret = imx6_pm_get_base(base: &pm_info->mmdc_base, compat: socdata->mmdc_compat);
527 if (ret) {
528 pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
529 goto put_device;
530 }
531
532 ret = imx6_pm_get_base(base: &pm_info->src_base, compat: socdata->src_compat);
533 if (ret) {
534 pr_warn("%s: failed to get src base %d!\n", __func__, ret);
535 goto src_map_failed;
536 }
537
538 ret = imx6_pm_get_base(base: &pm_info->iomuxc_base, compat: socdata->iomuxc_compat);
539 if (ret) {
540 pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
541 goto iomuxc_map_failed;
542 }
543
544 ret = imx6_pm_get_base(base: &pm_info->gpc_base, compat: socdata->gpc_compat);
545 if (ret) {
546 pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
547 goto gpc_map_failed;
548 }
549
550 if (socdata->pl310_compat) {
551 ret = imx6_pm_get_base(base: &pm_info->l2_base, compat: socdata->pl310_compat);
552 if (ret) {
553 pr_warn("%s: failed to get pl310-cache base %d!\n",
554 __func__, ret);
555 goto pl310_cache_map_failed;
556 }
557 }
558
559 pm_info->ddr_type = imx_mmdc_get_ddr_type();
560 pm_info->mmdc_io_num = socdata->mmdc_io_num;
561 mmdc_offset_array = socdata->mmdc_io_offset;
562
563 for (i = 0; i < pm_info->mmdc_io_num; i++) {
564 pm_info->mmdc_io_val[i][0] =
565 mmdc_offset_array[i];
566 pm_info->mmdc_io_val[i][1] =
567 readl_relaxed(pm_info->iomuxc_base.vbase +
568 mmdc_offset_array[i]);
569 }
570
571 imx6_suspend_in_ocram_fn = fncpy(
572 suspend_ocram_base + sizeof(*pm_info),
573 &imx6_suspend,
574 MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
575
576 __arm_iomem_set_ro(suspend_ocram_base, MX6Q_SUSPEND_OCRAM_SIZE);
577
578 goto put_device;
579
580pl310_cache_map_failed:
581 iounmap(addr: pm_info->gpc_base.vbase);
582gpc_map_failed:
583 iounmap(addr: pm_info->iomuxc_base.vbase);
584iomuxc_map_failed:
585 iounmap(addr: pm_info->src_base.vbase);
586src_map_failed:
587 iounmap(addr: pm_info->mmdc_base.vbase);
588put_device:
589 put_device(dev: &pdev->dev);
590put_node:
591 of_node_put(node);
592
593 return ret;
594}
595
596static void __init imx6_pm_common_init(const struct imx6_pm_socdata
597 *socdata)
598{
599 struct regmap *gpr;
600 int ret;
601
602 WARN_ON(!ccm_base);
603
604 if (IS_ENABLED(CONFIG_SUSPEND)) {
605 ret = imx6q_suspend_init(socdata);
606 if (ret)
607 pr_warn("%s: No DDR LPM support with suspend %d!\n",
608 __func__, ret);
609 }
610
611 /*
612 * This is for SW workaround step #1 of ERR007265, see comments
613 * in imx6_set_lpm for details of this errata.
614 * Force IOMUXC irq pending, so that the interrupt to GPC can be
615 * used to deassert dsm_request signal when the signal gets
616 * asserted unexpectedly.
617 */
618 gpr = syscon_regmap_lookup_by_compatible(s: "fsl,imx6q-iomuxc-gpr");
619 if (!IS_ERR(ptr: gpr))
620 regmap_update_bits(map: gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
621 IMX6Q_GPR1_GINT);
622}
623
624static void imx6_pm_stby_poweroff(void)
625{
626 gic_cpu_if_down(gic_nr: 0);
627 imx6_set_lpm(mode: STOP_POWER_OFF);
628 imx6q_suspend_finish(val: 0);
629
630 mdelay(1000);
631
632 pr_emerg("Unable to poweroff system\n");
633}
634
635static int imx6_pm_stby_poweroff_probe(void)
636{
637 if (pm_power_off) {
638 pr_warn("%s: pm_power_off already claimed %p %ps!\n",
639 __func__, pm_power_off, pm_power_off);
640 return -EBUSY;
641 }
642
643 pm_power_off = imx6_pm_stby_poweroff;
644 return 0;
645}
646
647void __init imx6_pm_ccm_init(const char *ccm_compat)
648{
649 struct device_node *np;
650 u32 val;
651
652 np = of_find_compatible_node(NULL, NULL, compat: ccm_compat);
653 ccm_base = of_iomap(node: np, index: 0);
654 BUG_ON(!ccm_base);
655
656 /*
657 * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core
658 * clock being shut down unexpectedly by WAIT mode.
659 */
660 val = readl_relaxed(ccm_base + CLPCR);
661 val &= ~BM_CLPCR_LPM;
662 writel_relaxed(val, ccm_base + CLPCR);
663
664 if (of_property_read_bool(np, propname: "fsl,pmic-stby-poweroff"))
665 imx6_pm_stby_poweroff_probe();
666
667 of_node_put(node: np);
668}
669
670void __init imx6q_pm_init(void)
671{
672 imx6_pm_common_init(socdata: &imx6q_pm_data);
673}
674
675void __init imx6dl_pm_init(void)
676{
677 imx6_pm_common_init(socdata: &imx6dl_pm_data);
678}
679
680void __init imx6sl_pm_init(void)
681{
682 struct regmap *gpr;
683
684 if (cpu_is_imx6sl()) {
685 imx6_pm_common_init(socdata: &imx6sl_pm_data);
686 } else {
687 imx6_pm_common_init(socdata: &imx6sll_pm_data);
688 gpr = syscon_regmap_lookup_by_compatible(s: "fsl,imx6q-iomuxc-gpr");
689 if (!IS_ERR(ptr: gpr))
690 regmap_update_bits(map: gpr, IOMUXC_GPR5,
691 IMX6SLL_GPR5_AFCG_X_BYPASS_MASK, val: 0);
692 }
693}
694
695void __init imx6sx_pm_init(void)
696{
697 imx6_pm_common_init(socdata: &imx6sx_pm_data);
698}
699
700void __init imx6ul_pm_init(void)
701{
702 imx6_pm_common_init(socdata: &imx6ul_pm_data);
703}
704

source code of linux/arch/arm/mach-imx/pm-imx6.c