1 | // SPDX-License-Identifier: GPL-2.0 |
2 | /* |
3 | * Wireless utility functions |
4 | * |
5 | * Copyright 2007-2009 Johannes Berg <johannes@sipsolutions.net> |
6 | * Copyright 2013-2014 Intel Mobile Communications GmbH |
7 | * Copyright 2017 Intel Deutschland GmbH |
8 | * Copyright (C) 2018-2023 Intel Corporation |
9 | */ |
10 | #include <linux/export.h> |
11 | #include <linux/bitops.h> |
12 | #include <linux/etherdevice.h> |
13 | #include <linux/slab.h> |
14 | #include <linux/ieee80211.h> |
15 | #include <net/cfg80211.h> |
16 | #include <net/ip.h> |
17 | #include <net/dsfield.h> |
18 | #include <linux/if_vlan.h> |
19 | #include <linux/mpls.h> |
20 | #include <linux/gcd.h> |
21 | #include <linux/bitfield.h> |
22 | #include <linux/nospec.h> |
23 | #include "core.h" |
24 | #include "rdev-ops.h" |
25 | |
26 | |
27 | const struct ieee80211_rate * |
28 | ieee80211_get_response_rate(struct ieee80211_supported_band *sband, |
29 | u32 basic_rates, int bitrate) |
30 | { |
31 | struct ieee80211_rate *result = &sband->bitrates[0]; |
32 | int i; |
33 | |
34 | for (i = 0; i < sband->n_bitrates; i++) { |
35 | if (!(basic_rates & BIT(i))) |
36 | continue; |
37 | if (sband->bitrates[i].bitrate > bitrate) |
38 | continue; |
39 | result = &sband->bitrates[i]; |
40 | } |
41 | |
42 | return result; |
43 | } |
44 | EXPORT_SYMBOL(ieee80211_get_response_rate); |
45 | |
46 | u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband) |
47 | { |
48 | struct ieee80211_rate *bitrates; |
49 | u32 mandatory_rates = 0; |
50 | enum ieee80211_rate_flags mandatory_flag; |
51 | int i; |
52 | |
53 | if (WARN_ON(!sband)) |
54 | return 1; |
55 | |
56 | if (sband->band == NL80211_BAND_2GHZ) |
57 | mandatory_flag = IEEE80211_RATE_MANDATORY_B; |
58 | else |
59 | mandatory_flag = IEEE80211_RATE_MANDATORY_A; |
60 | |
61 | bitrates = sband->bitrates; |
62 | for (i = 0; i < sband->n_bitrates; i++) |
63 | if (bitrates[i].flags & mandatory_flag) |
64 | mandatory_rates |= BIT(i); |
65 | return mandatory_rates; |
66 | } |
67 | EXPORT_SYMBOL(ieee80211_mandatory_rates); |
68 | |
69 | u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band) |
70 | { |
71 | /* see 802.11 17.3.8.3.2 and Annex J |
72 | * there are overlapping channel numbers in 5GHz and 2GHz bands */ |
73 | if (chan <= 0) |
74 | return 0; /* not supported */ |
75 | switch (band) { |
76 | case NL80211_BAND_2GHZ: |
77 | case NL80211_BAND_LC: |
78 | if (chan == 14) |
79 | return MHZ_TO_KHZ(2484); |
80 | else if (chan < 14) |
81 | return MHZ_TO_KHZ(2407 + chan * 5); |
82 | break; |
83 | case NL80211_BAND_5GHZ: |
84 | if (chan >= 182 && chan <= 196) |
85 | return MHZ_TO_KHZ(4000 + chan * 5); |
86 | else |
87 | return MHZ_TO_KHZ(5000 + chan * 5); |
88 | break; |
89 | case NL80211_BAND_6GHZ: |
90 | /* see 802.11ax D6.1 27.3.23.2 */ |
91 | if (chan == 2) |
92 | return MHZ_TO_KHZ(5935); |
93 | if (chan <= 233) |
94 | return MHZ_TO_KHZ(5950 + chan * 5); |
95 | break; |
96 | case NL80211_BAND_60GHZ: |
97 | if (chan < 7) |
98 | return MHZ_TO_KHZ(56160 + chan * 2160); |
99 | break; |
100 | case NL80211_BAND_S1GHZ: |
101 | return 902000 + chan * 500; |
102 | default: |
103 | ; |
104 | } |
105 | return 0; /* not supported */ |
106 | } |
107 | EXPORT_SYMBOL(ieee80211_channel_to_freq_khz); |
108 | |
109 | enum nl80211_chan_width |
110 | ieee80211_s1g_channel_width(const struct ieee80211_channel *chan) |
111 | { |
112 | if (WARN_ON(!chan || chan->band != NL80211_BAND_S1GHZ)) |
113 | return NL80211_CHAN_WIDTH_20_NOHT; |
114 | |
115 | /*S1G defines a single allowed channel width per channel. |
116 | * Extract that width here. |
117 | */ |
118 | if (chan->flags & IEEE80211_CHAN_1MHZ) |
119 | return NL80211_CHAN_WIDTH_1; |
120 | else if (chan->flags & IEEE80211_CHAN_2MHZ) |
121 | return NL80211_CHAN_WIDTH_2; |
122 | else if (chan->flags & IEEE80211_CHAN_4MHZ) |
123 | return NL80211_CHAN_WIDTH_4; |
124 | else if (chan->flags & IEEE80211_CHAN_8MHZ) |
125 | return NL80211_CHAN_WIDTH_8; |
126 | else if (chan->flags & IEEE80211_CHAN_16MHZ) |
127 | return NL80211_CHAN_WIDTH_16; |
128 | |
129 | pr_err("unknown channel width for channel at %dKHz?\n" , |
130 | ieee80211_channel_to_khz(chan)); |
131 | |
132 | return NL80211_CHAN_WIDTH_1; |
133 | } |
134 | EXPORT_SYMBOL(ieee80211_s1g_channel_width); |
135 | |
136 | int ieee80211_freq_khz_to_channel(u32 freq) |
137 | { |
138 | /* TODO: just handle MHz for now */ |
139 | freq = KHZ_TO_MHZ(freq); |
140 | |
141 | /* see 802.11 17.3.8.3.2 and Annex J */ |
142 | if (freq == 2484) |
143 | return 14; |
144 | else if (freq < 2484) |
145 | return (freq - 2407) / 5; |
146 | else if (freq >= 4910 && freq <= 4980) |
147 | return (freq - 4000) / 5; |
148 | else if (freq < 5925) |
149 | return (freq - 5000) / 5; |
150 | else if (freq == 5935) |
151 | return 2; |
152 | else if (freq <= 45000) /* DMG band lower limit */ |
153 | /* see 802.11ax D6.1 27.3.22.2 */ |
154 | return (freq - 5950) / 5; |
155 | else if (freq >= 58320 && freq <= 70200) |
156 | return (freq - 56160) / 2160; |
157 | else |
158 | return 0; |
159 | } |
160 | EXPORT_SYMBOL(ieee80211_freq_khz_to_channel); |
161 | |
162 | struct ieee80211_channel *ieee80211_get_channel_khz(struct wiphy *wiphy, |
163 | u32 freq) |
164 | { |
165 | enum nl80211_band band; |
166 | struct ieee80211_supported_band *sband; |
167 | int i; |
168 | |
169 | for (band = 0; band < NUM_NL80211_BANDS; band++) { |
170 | sband = wiphy->bands[band]; |
171 | |
172 | if (!sband) |
173 | continue; |
174 | |
175 | for (i = 0; i < sband->n_channels; i++) { |
176 | struct ieee80211_channel *chan = &sband->channels[i]; |
177 | |
178 | if (ieee80211_channel_to_khz(chan) == freq) |
179 | return chan; |
180 | } |
181 | } |
182 | |
183 | return NULL; |
184 | } |
185 | EXPORT_SYMBOL(ieee80211_get_channel_khz); |
186 | |
187 | static void set_mandatory_flags_band(struct ieee80211_supported_band *sband) |
188 | { |
189 | int i, want; |
190 | |
191 | switch (sband->band) { |
192 | case NL80211_BAND_5GHZ: |
193 | case NL80211_BAND_6GHZ: |
194 | want = 3; |
195 | for (i = 0; i < sband->n_bitrates; i++) { |
196 | if (sband->bitrates[i].bitrate == 60 || |
197 | sband->bitrates[i].bitrate == 120 || |
198 | sband->bitrates[i].bitrate == 240) { |
199 | sband->bitrates[i].flags |= |
200 | IEEE80211_RATE_MANDATORY_A; |
201 | want--; |
202 | } |
203 | } |
204 | WARN_ON(want); |
205 | break; |
206 | case NL80211_BAND_2GHZ: |
207 | case NL80211_BAND_LC: |
208 | want = 7; |
209 | for (i = 0; i < sband->n_bitrates; i++) { |
210 | switch (sband->bitrates[i].bitrate) { |
211 | case 10: |
212 | case 20: |
213 | case 55: |
214 | case 110: |
215 | sband->bitrates[i].flags |= |
216 | IEEE80211_RATE_MANDATORY_B | |
217 | IEEE80211_RATE_MANDATORY_G; |
218 | want--; |
219 | break; |
220 | case 60: |
221 | case 120: |
222 | case 240: |
223 | sband->bitrates[i].flags |= |
224 | IEEE80211_RATE_MANDATORY_G; |
225 | want--; |
226 | fallthrough; |
227 | default: |
228 | sband->bitrates[i].flags |= |
229 | IEEE80211_RATE_ERP_G; |
230 | break; |
231 | } |
232 | } |
233 | WARN_ON(want != 0 && want != 3); |
234 | break; |
235 | case NL80211_BAND_60GHZ: |
236 | /* check for mandatory HT MCS 1..4 */ |
237 | WARN_ON(!sband->ht_cap.ht_supported); |
238 | WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e); |
239 | break; |
240 | case NL80211_BAND_S1GHZ: |
241 | /* Figure 9-589bd: 3 means unsupported, so != 3 means at least |
242 | * mandatory is ok. |
243 | */ |
244 | WARN_ON((sband->s1g_cap.nss_mcs[0] & 0x3) == 0x3); |
245 | break; |
246 | case NUM_NL80211_BANDS: |
247 | default: |
248 | WARN_ON(1); |
249 | break; |
250 | } |
251 | } |
252 | |
253 | void ieee80211_set_bitrate_flags(struct wiphy *wiphy) |
254 | { |
255 | enum nl80211_band band; |
256 | |
257 | for (band = 0; band < NUM_NL80211_BANDS; band++) |
258 | if (wiphy->bands[band]) |
259 | set_mandatory_flags_band(wiphy->bands[band]); |
260 | } |
261 | |
262 | bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher) |
263 | { |
264 | int i; |
265 | for (i = 0; i < wiphy->n_cipher_suites; i++) |
266 | if (cipher == wiphy->cipher_suites[i]) |
267 | return true; |
268 | return false; |
269 | } |
270 | |
271 | static bool |
272 | cfg80211_igtk_cipher_supported(struct cfg80211_registered_device *rdev) |
273 | { |
274 | struct wiphy *wiphy = &rdev->wiphy; |
275 | int i; |
276 | |
277 | for (i = 0; i < wiphy->n_cipher_suites; i++) { |
278 | switch (wiphy->cipher_suites[i]) { |
279 | case WLAN_CIPHER_SUITE_AES_CMAC: |
280 | case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
281 | case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
282 | case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
283 | return true; |
284 | } |
285 | } |
286 | |
287 | return false; |
288 | } |
289 | |
290 | bool cfg80211_valid_key_idx(struct cfg80211_registered_device *rdev, |
291 | int key_idx, bool pairwise) |
292 | { |
293 | int max_key_idx; |
294 | |
295 | if (pairwise) |
296 | max_key_idx = 3; |
297 | else if (wiphy_ext_feature_isset(wiphy: &rdev->wiphy, |
298 | ftidx: NL80211_EXT_FEATURE_BEACON_PROTECTION) || |
299 | wiphy_ext_feature_isset(wiphy: &rdev->wiphy, |
300 | ftidx: NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT)) |
301 | max_key_idx = 7; |
302 | else if (cfg80211_igtk_cipher_supported(rdev)) |
303 | max_key_idx = 5; |
304 | else |
305 | max_key_idx = 3; |
306 | |
307 | if (key_idx < 0 || key_idx > max_key_idx) |
308 | return false; |
309 | |
310 | return true; |
311 | } |
312 | |
313 | int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, |
314 | struct key_params *params, int key_idx, |
315 | bool pairwise, const u8 *mac_addr) |
316 | { |
317 | if (!cfg80211_valid_key_idx(rdev, key_idx, pairwise)) |
318 | return -EINVAL; |
319 | |
320 | if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN)) |
321 | return -EINVAL; |
322 | |
323 | if (pairwise && !mac_addr) |
324 | return -EINVAL; |
325 | |
326 | switch (params->cipher) { |
327 | case WLAN_CIPHER_SUITE_TKIP: |
328 | /* Extended Key ID can only be used with CCMP/GCMP ciphers */ |
329 | if ((pairwise && key_idx) || |
330 | params->mode != NL80211_KEY_RX_TX) |
331 | return -EINVAL; |
332 | break; |
333 | case WLAN_CIPHER_SUITE_CCMP: |
334 | case WLAN_CIPHER_SUITE_CCMP_256: |
335 | case WLAN_CIPHER_SUITE_GCMP: |
336 | case WLAN_CIPHER_SUITE_GCMP_256: |
337 | /* IEEE802.11-2016 allows only 0 and - when supporting |
338 | * Extended Key ID - 1 as index for pairwise keys. |
339 | * @NL80211_KEY_NO_TX is only allowed for pairwise keys when |
340 | * the driver supports Extended Key ID. |
341 | * @NL80211_KEY_SET_TX can't be set when installing and |
342 | * validating a key. |
343 | */ |
344 | if ((params->mode == NL80211_KEY_NO_TX && !pairwise) || |
345 | params->mode == NL80211_KEY_SET_TX) |
346 | return -EINVAL; |
347 | if (wiphy_ext_feature_isset(wiphy: &rdev->wiphy, |
348 | ftidx: NL80211_EXT_FEATURE_EXT_KEY_ID)) { |
349 | if (pairwise && (key_idx < 0 || key_idx > 1)) |
350 | return -EINVAL; |
351 | } else if (pairwise && key_idx) { |
352 | return -EINVAL; |
353 | } |
354 | break; |
355 | case WLAN_CIPHER_SUITE_AES_CMAC: |
356 | case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
357 | case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
358 | case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
359 | /* Disallow BIP (group-only) cipher as pairwise cipher */ |
360 | if (pairwise) |
361 | return -EINVAL; |
362 | if (key_idx < 4) |
363 | return -EINVAL; |
364 | break; |
365 | case WLAN_CIPHER_SUITE_WEP40: |
366 | case WLAN_CIPHER_SUITE_WEP104: |
367 | if (key_idx > 3) |
368 | return -EINVAL; |
369 | break; |
370 | default: |
371 | break; |
372 | } |
373 | |
374 | switch (params->cipher) { |
375 | case WLAN_CIPHER_SUITE_WEP40: |
376 | if (params->key_len != WLAN_KEY_LEN_WEP40) |
377 | return -EINVAL; |
378 | break; |
379 | case WLAN_CIPHER_SUITE_TKIP: |
380 | if (params->key_len != WLAN_KEY_LEN_TKIP) |
381 | return -EINVAL; |
382 | break; |
383 | case WLAN_CIPHER_SUITE_CCMP: |
384 | if (params->key_len != WLAN_KEY_LEN_CCMP) |
385 | return -EINVAL; |
386 | break; |
387 | case WLAN_CIPHER_SUITE_CCMP_256: |
388 | if (params->key_len != WLAN_KEY_LEN_CCMP_256) |
389 | return -EINVAL; |
390 | break; |
391 | case WLAN_CIPHER_SUITE_GCMP: |
392 | if (params->key_len != WLAN_KEY_LEN_GCMP) |
393 | return -EINVAL; |
394 | break; |
395 | case WLAN_CIPHER_SUITE_GCMP_256: |
396 | if (params->key_len != WLAN_KEY_LEN_GCMP_256) |
397 | return -EINVAL; |
398 | break; |
399 | case WLAN_CIPHER_SUITE_WEP104: |
400 | if (params->key_len != WLAN_KEY_LEN_WEP104) |
401 | return -EINVAL; |
402 | break; |
403 | case WLAN_CIPHER_SUITE_AES_CMAC: |
404 | if (params->key_len != WLAN_KEY_LEN_AES_CMAC) |
405 | return -EINVAL; |
406 | break; |
407 | case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
408 | if (params->key_len != WLAN_KEY_LEN_BIP_CMAC_256) |
409 | return -EINVAL; |
410 | break; |
411 | case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
412 | if (params->key_len != WLAN_KEY_LEN_BIP_GMAC_128) |
413 | return -EINVAL; |
414 | break; |
415 | case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
416 | if (params->key_len != WLAN_KEY_LEN_BIP_GMAC_256) |
417 | return -EINVAL; |
418 | break; |
419 | default: |
420 | /* |
421 | * We don't know anything about this algorithm, |
422 | * allow using it -- but the driver must check |
423 | * all parameters! We still check below whether |
424 | * or not the driver supports this algorithm, |
425 | * of course. |
426 | */ |
427 | break; |
428 | } |
429 | |
430 | if (params->seq) { |
431 | switch (params->cipher) { |
432 | case WLAN_CIPHER_SUITE_WEP40: |
433 | case WLAN_CIPHER_SUITE_WEP104: |
434 | /* These ciphers do not use key sequence */ |
435 | return -EINVAL; |
436 | case WLAN_CIPHER_SUITE_TKIP: |
437 | case WLAN_CIPHER_SUITE_CCMP: |
438 | case WLAN_CIPHER_SUITE_CCMP_256: |
439 | case WLAN_CIPHER_SUITE_GCMP: |
440 | case WLAN_CIPHER_SUITE_GCMP_256: |
441 | case WLAN_CIPHER_SUITE_AES_CMAC: |
442 | case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
443 | case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
444 | case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
445 | if (params->seq_len != 6) |
446 | return -EINVAL; |
447 | break; |
448 | } |
449 | } |
450 | |
451 | if (!cfg80211_supported_cipher_suite(wiphy: &rdev->wiphy, cipher: params->cipher)) |
452 | return -EINVAL; |
453 | |
454 | return 0; |
455 | } |
456 | |
457 | unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc) |
458 | { |
459 | unsigned int hdrlen = 24; |
460 | |
461 | if (ieee80211_is_ext(fc)) { |
462 | hdrlen = 4; |
463 | goto out; |
464 | } |
465 | |
466 | if (ieee80211_is_data(fc)) { |
467 | if (ieee80211_has_a4(fc)) |
468 | hdrlen = 30; |
469 | if (ieee80211_is_data_qos(fc)) { |
470 | hdrlen += IEEE80211_QOS_CTL_LEN; |
471 | if (ieee80211_has_order(fc)) |
472 | hdrlen += IEEE80211_HT_CTL_LEN; |
473 | } |
474 | goto out; |
475 | } |
476 | |
477 | if (ieee80211_is_mgmt(fc)) { |
478 | if (ieee80211_has_order(fc)) |
479 | hdrlen += IEEE80211_HT_CTL_LEN; |
480 | goto out; |
481 | } |
482 | |
483 | if (ieee80211_is_ctl(fc)) { |
484 | /* |
485 | * ACK and CTS are 10 bytes, all others 16. To see how |
486 | * to get this condition consider |
487 | * subtype mask: 0b0000000011110000 (0x00F0) |
488 | * ACK subtype: 0b0000000011010000 (0x00D0) |
489 | * CTS subtype: 0b0000000011000000 (0x00C0) |
490 | * bits that matter: ^^^ (0x00E0) |
491 | * value of those: 0b0000000011000000 (0x00C0) |
492 | */ |
493 | if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0)) |
494 | hdrlen = 10; |
495 | else |
496 | hdrlen = 16; |
497 | } |
498 | out: |
499 | return hdrlen; |
500 | } |
501 | EXPORT_SYMBOL(ieee80211_hdrlen); |
502 | |
503 | unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) |
504 | { |
505 | const struct ieee80211_hdr *hdr = |
506 | (const struct ieee80211_hdr *)skb->data; |
507 | unsigned int hdrlen; |
508 | |
509 | if (unlikely(skb->len < 10)) |
510 | return 0; |
511 | hdrlen = ieee80211_hdrlen(hdr->frame_control); |
512 | if (unlikely(hdrlen > skb->len)) |
513 | return 0; |
514 | return hdrlen; |
515 | } |
516 | EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); |
517 | |
518 | static unsigned int __ieee80211_get_mesh_hdrlen(u8 flags) |
519 | { |
520 | int ae = flags & MESH_FLAGS_AE; |
521 | /* 802.11-2012, 8.2.4.7.3 */ |
522 | switch (ae) { |
523 | default: |
524 | case 0: |
525 | return 6; |
526 | case MESH_FLAGS_AE_A4: |
527 | return 12; |
528 | case MESH_FLAGS_AE_A5_A6: |
529 | return 18; |
530 | } |
531 | } |
532 | |
533 | unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) |
534 | { |
535 | return __ieee80211_get_mesh_hdrlen(flags: meshhdr->flags); |
536 | } |
537 | EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen); |
538 | |
539 | bool ieee80211_get_8023_tunnel_proto(const void *hdr, __be16 *proto) |
540 | { |
541 | const __be16 *hdr_proto = hdr + ETH_ALEN; |
542 | |
543 | if (!(ether_addr_equal(addr1: hdr, addr2: rfc1042_header) && |
544 | *hdr_proto != htons(ETH_P_AARP) && |
545 | *hdr_proto != htons(ETH_P_IPX)) && |
546 | !ether_addr_equal(addr1: hdr, addr2: bridge_tunnel_header)) |
547 | return false; |
548 | |
549 | *proto = *hdr_proto; |
550 | |
551 | return true; |
552 | } |
553 | EXPORT_SYMBOL(ieee80211_get_8023_tunnel_proto); |
554 | |
555 | int ieee80211_strip_8023_mesh_hdr(struct sk_buff *skb) |
556 | { |
557 | const void *mesh_addr; |
558 | struct { |
559 | struct ethhdr eth; |
560 | u8 flags; |
561 | } payload; |
562 | int hdrlen; |
563 | int ret; |
564 | |
565 | ret = skb_copy_bits(skb, offset: 0, to: &payload, len: sizeof(payload)); |
566 | if (ret) |
567 | return ret; |
568 | |
569 | hdrlen = sizeof(payload.eth) + __ieee80211_get_mesh_hdrlen(flags: payload.flags); |
570 | |
571 | if (likely(pskb_may_pull(skb, hdrlen + 8) && |
572 | ieee80211_get_8023_tunnel_proto(skb->data + hdrlen, |
573 | &payload.eth.h_proto))) |
574 | hdrlen += ETH_ALEN + 2; |
575 | else if (!pskb_may_pull(skb, len: hdrlen)) |
576 | return -EINVAL; |
577 | else |
578 | payload.eth.h_proto = htons(skb->len - hdrlen); |
579 | |
580 | mesh_addr = skb->data + sizeof(payload.eth) + ETH_ALEN; |
581 | switch (payload.flags & MESH_FLAGS_AE) { |
582 | case MESH_FLAGS_AE_A4: |
583 | memcpy(&payload.eth.h_source, mesh_addr, ETH_ALEN); |
584 | break; |
585 | case MESH_FLAGS_AE_A5_A6: |
586 | memcpy(&payload.eth, mesh_addr, 2 * ETH_ALEN); |
587 | break; |
588 | default: |
589 | break; |
590 | } |
591 | |
592 | pskb_pull(skb, len: hdrlen - sizeof(payload.eth)); |
593 | memcpy(skb->data, &payload.eth, sizeof(payload.eth)); |
594 | |
595 | return 0; |
596 | } |
597 | EXPORT_SYMBOL(ieee80211_strip_8023_mesh_hdr); |
598 | |
599 | int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, |
600 | const u8 *addr, enum nl80211_iftype iftype, |
601 | u8 data_offset, bool is_amsdu) |
602 | { |
603 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
604 | struct { |
605 | u8 hdr[ETH_ALEN] __aligned(2); |
606 | __be16 proto; |
607 | } payload; |
608 | struct ethhdr tmp; |
609 | u16 hdrlen; |
610 | |
611 | if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) |
612 | return -1; |
613 | |
614 | hdrlen = ieee80211_hdrlen(hdr->frame_control) + data_offset; |
615 | if (skb->len < hdrlen) |
616 | return -1; |
617 | |
618 | /* convert IEEE 802.11 header + possible LLC headers into Ethernet |
619 | * header |
620 | * IEEE 802.11 address fields: |
621 | * ToDS FromDS Addr1 Addr2 Addr3 Addr4 |
622 | * 0 0 DA SA BSSID n/a |
623 | * 0 1 DA BSSID SA n/a |
624 | * 1 0 BSSID SA DA n/a |
625 | * 1 1 RA TA DA SA |
626 | */ |
627 | memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN); |
628 | memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN); |
629 | |
630 | switch (hdr->frame_control & |
631 | cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { |
632 | case cpu_to_le16(IEEE80211_FCTL_TODS): |
633 | if (unlikely(iftype != NL80211_IFTYPE_AP && |
634 | iftype != NL80211_IFTYPE_AP_VLAN && |
635 | iftype != NL80211_IFTYPE_P2P_GO)) |
636 | return -1; |
637 | break; |
638 | case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): |
639 | if (unlikely(iftype != NL80211_IFTYPE_MESH_POINT && |
640 | iftype != NL80211_IFTYPE_AP_VLAN && |
641 | iftype != NL80211_IFTYPE_STATION)) |
642 | return -1; |
643 | break; |
644 | case cpu_to_le16(IEEE80211_FCTL_FROMDS): |
645 | if ((iftype != NL80211_IFTYPE_STATION && |
646 | iftype != NL80211_IFTYPE_P2P_CLIENT && |
647 | iftype != NL80211_IFTYPE_MESH_POINT) || |
648 | (is_multicast_ether_addr(addr: tmp.h_dest) && |
649 | ether_addr_equal(addr1: tmp.h_source, addr2: addr))) |
650 | return -1; |
651 | break; |
652 | case cpu_to_le16(0): |
653 | if (iftype != NL80211_IFTYPE_ADHOC && |
654 | iftype != NL80211_IFTYPE_STATION && |
655 | iftype != NL80211_IFTYPE_OCB) |
656 | return -1; |
657 | break; |
658 | } |
659 | |
660 | if (likely(!is_amsdu && iftype != NL80211_IFTYPE_MESH_POINT && |
661 | skb_copy_bits(skb, hdrlen, &payload, sizeof(payload)) == 0 && |
662 | ieee80211_get_8023_tunnel_proto(&payload, &tmp.h_proto))) { |
663 | /* remove RFC1042 or Bridge-Tunnel encapsulation */ |
664 | hdrlen += ETH_ALEN + 2; |
665 | skb_postpull_rcsum(skb, start: &payload, ETH_ALEN + 2); |
666 | } else { |
667 | tmp.h_proto = htons(skb->len - hdrlen); |
668 | } |
669 | |
670 | pskb_pull(skb, len: hdrlen); |
671 | |
672 | if (!ehdr) |
673 | ehdr = skb_push(skb, len: sizeof(struct ethhdr)); |
674 | memcpy(ehdr, &tmp, sizeof(tmp)); |
675 | |
676 | return 0; |
677 | } |
678 | EXPORT_SYMBOL(ieee80211_data_to_8023_exthdr); |
679 | |
680 | static void |
681 | __frame_add_frag(struct sk_buff *skb, struct page *page, |
682 | void *ptr, int len, int size) |
683 | { |
684 | struct skb_shared_info *sh = skb_shinfo(skb); |
685 | int page_offset; |
686 | |
687 | get_page(page); |
688 | page_offset = ptr - page_address(page); |
689 | skb_add_rx_frag(skb, i: sh->nr_frags, page, off: page_offset, size: len, truesize: size); |
690 | } |
691 | |
692 | static void |
693 | __ieee80211_amsdu_copy_frag(struct sk_buff *skb, struct sk_buff *frame, |
694 | int offset, int len) |
695 | { |
696 | struct skb_shared_info *sh = skb_shinfo(skb); |
697 | const skb_frag_t *frag = &sh->frags[0]; |
698 | struct page *frag_page; |
699 | void *frag_ptr; |
700 | int frag_len, frag_size; |
701 | int head_size = skb->len - skb->data_len; |
702 | int cur_len; |
703 | |
704 | frag_page = virt_to_head_page(x: skb->head); |
705 | frag_ptr = skb->data; |
706 | frag_size = head_size; |
707 | |
708 | while (offset >= frag_size) { |
709 | offset -= frag_size; |
710 | frag_page = skb_frag_page(frag); |
711 | frag_ptr = skb_frag_address(frag); |
712 | frag_size = skb_frag_size(frag); |
713 | frag++; |
714 | } |
715 | |
716 | frag_ptr += offset; |
717 | frag_len = frag_size - offset; |
718 | |
719 | cur_len = min(len, frag_len); |
720 | |
721 | __frame_add_frag(skb: frame, page: frag_page, ptr: frag_ptr, len: cur_len, size: frag_size); |
722 | len -= cur_len; |
723 | |
724 | while (len > 0) { |
725 | frag_len = skb_frag_size(frag); |
726 | cur_len = min(len, frag_len); |
727 | __frame_add_frag(skb: frame, page: skb_frag_page(frag), |
728 | ptr: skb_frag_address(frag), len: cur_len, size: frag_len); |
729 | len -= cur_len; |
730 | frag++; |
731 | } |
732 | } |
733 | |
734 | static struct sk_buff * |
735 | __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, |
736 | int offset, int len, bool reuse_frag, |
737 | int min_len) |
738 | { |
739 | struct sk_buff *frame; |
740 | int cur_len = len; |
741 | |
742 | if (skb->len - offset < len) |
743 | return NULL; |
744 | |
745 | /* |
746 | * When reusing framents, copy some data to the head to simplify |
747 | * ethernet header handling and speed up protocol header processing |
748 | * in the stack later. |
749 | */ |
750 | if (reuse_frag) |
751 | cur_len = min_t(int, len, min_len); |
752 | |
753 | /* |
754 | * Allocate and reserve two bytes more for payload |
755 | * alignment since sizeof(struct ethhdr) is 14. |
756 | */ |
757 | frame = dev_alloc_skb(length: hlen + sizeof(struct ethhdr) + 2 + cur_len); |
758 | if (!frame) |
759 | return NULL; |
760 | |
761 | frame->priority = skb->priority; |
762 | skb_reserve(skb: frame, len: hlen + sizeof(struct ethhdr) + 2); |
763 | skb_copy_bits(skb, offset, to: skb_put(skb: frame, len: cur_len), len: cur_len); |
764 | |
765 | len -= cur_len; |
766 | if (!len) |
767 | return frame; |
768 | |
769 | offset += cur_len; |
770 | __ieee80211_amsdu_copy_frag(skb, frame, offset, len); |
771 | |
772 | return frame; |
773 | } |
774 | |
775 | static u16 |
776 | ieee80211_amsdu_subframe_length(void *field, u8 mesh_flags, u8 hdr_type) |
777 | { |
778 | __le16 *field_le = field; |
779 | __be16 *field_be = field; |
780 | u16 len; |
781 | |
782 | if (hdr_type >= 2) |
783 | len = le16_to_cpu(*field_le); |
784 | else |
785 | len = be16_to_cpu(*field_be); |
786 | if (hdr_type) |
787 | len += __ieee80211_get_mesh_hdrlen(flags: mesh_flags); |
788 | |
789 | return len; |
790 | } |
791 | |
792 | bool ieee80211_is_valid_amsdu(struct sk_buff *skb, u8 mesh_hdr) |
793 | { |
794 | int offset = 0, subframe_len, padding; |
795 | |
796 | for (offset = 0; offset < skb->len; offset += subframe_len + padding) { |
797 | int remaining = skb->len - offset; |
798 | struct { |
799 | __be16 len; |
800 | u8 mesh_flags; |
801 | } hdr; |
802 | u16 len; |
803 | |
804 | if (sizeof(hdr) > remaining) |
805 | return false; |
806 | |
807 | if (skb_copy_bits(skb, offset: offset + 2 * ETH_ALEN, to: &hdr, len: sizeof(hdr)) < 0) |
808 | return false; |
809 | |
810 | len = ieee80211_amsdu_subframe_length(field: &hdr.len, mesh_flags: hdr.mesh_flags, |
811 | hdr_type: mesh_hdr); |
812 | subframe_len = sizeof(struct ethhdr) + len; |
813 | padding = (4 - subframe_len) & 0x3; |
814 | |
815 | if (subframe_len > remaining) |
816 | return false; |
817 | } |
818 | |
819 | return true; |
820 | } |
821 | EXPORT_SYMBOL(ieee80211_is_valid_amsdu); |
822 | |
823 | void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, |
824 | const u8 *addr, enum nl80211_iftype iftype, |
825 | const unsigned int , |
826 | const u8 *check_da, const u8 *check_sa, |
827 | u8 mesh_control) |
828 | { |
829 | unsigned int hlen = ALIGN(extra_headroom, 4); |
830 | struct sk_buff *frame = NULL; |
831 | int offset = 0; |
832 | struct { |
833 | struct ethhdr eth; |
834 | uint8_t flags; |
835 | } hdr; |
836 | bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb); |
837 | bool reuse_skb = false; |
838 | bool last = false; |
839 | int copy_len = sizeof(hdr.eth); |
840 | |
841 | if (iftype == NL80211_IFTYPE_MESH_POINT) |
842 | copy_len = sizeof(hdr); |
843 | |
844 | while (!last) { |
845 | int remaining = skb->len - offset; |
846 | unsigned int subframe_len; |
847 | int len, mesh_len = 0; |
848 | u8 padding; |
849 | |
850 | if (copy_len > remaining) |
851 | goto purge; |
852 | |
853 | skb_copy_bits(skb, offset, to: &hdr, len: copy_len); |
854 | if (iftype == NL80211_IFTYPE_MESH_POINT) |
855 | mesh_len = __ieee80211_get_mesh_hdrlen(flags: hdr.flags); |
856 | len = ieee80211_amsdu_subframe_length(field: &hdr.eth.h_proto, mesh_flags: hdr.flags, |
857 | hdr_type: mesh_control); |
858 | subframe_len = sizeof(struct ethhdr) + len; |
859 | padding = (4 - subframe_len) & 0x3; |
860 | |
861 | /* the last MSDU has no padding */ |
862 | if (subframe_len > remaining) |
863 | goto purge; |
864 | /* mitigate A-MSDU aggregation injection attacks */ |
865 | if (ether_addr_equal(addr1: hdr.eth.h_dest, addr2: rfc1042_header)) |
866 | goto purge; |
867 | |
868 | offset += sizeof(struct ethhdr); |
869 | last = remaining <= subframe_len + padding; |
870 | |
871 | /* FIXME: should we really accept multicast DA? */ |
872 | if ((check_da && !is_multicast_ether_addr(addr: hdr.eth.h_dest) && |
873 | !ether_addr_equal(addr1: check_da, addr2: hdr.eth.h_dest)) || |
874 | (check_sa && !ether_addr_equal(addr1: check_sa, addr2: hdr.eth.h_source))) { |
875 | offset += len + padding; |
876 | continue; |
877 | } |
878 | |
879 | /* reuse skb for the last subframe */ |
880 | if (!skb_is_nonlinear(skb) && !reuse_frag && last) { |
881 | skb_pull(skb, len: offset); |
882 | frame = skb; |
883 | reuse_skb = true; |
884 | } else { |
885 | frame = __ieee80211_amsdu_copy(skb, hlen, offset, len, |
886 | reuse_frag, min_len: 32 + mesh_len); |
887 | if (!frame) |
888 | goto purge; |
889 | |
890 | offset += len + padding; |
891 | } |
892 | |
893 | skb_reset_network_header(skb: frame); |
894 | frame->dev = skb->dev; |
895 | frame->priority = skb->priority; |
896 | |
897 | if (likely(iftype != NL80211_IFTYPE_MESH_POINT && |
898 | ieee80211_get_8023_tunnel_proto(frame->data, &hdr.eth.h_proto))) |
899 | skb_pull(skb: frame, ETH_ALEN + 2); |
900 | |
901 | memcpy(skb_push(frame, sizeof(hdr.eth)), &hdr.eth, sizeof(hdr.eth)); |
902 | __skb_queue_tail(list, newsk: frame); |
903 | } |
904 | |
905 | if (!reuse_skb) |
906 | dev_kfree_skb(skb); |
907 | |
908 | return; |
909 | |
910 | purge: |
911 | __skb_queue_purge(list); |
912 | dev_kfree_skb(skb); |
913 | } |
914 | EXPORT_SYMBOL(ieee80211_amsdu_to_8023s); |
915 | |
916 | /* Given a data frame determine the 802.1p/1d tag to use. */ |
917 | unsigned int cfg80211_classify8021d(struct sk_buff *skb, |
918 | struct cfg80211_qos_map *qos_map) |
919 | { |
920 | unsigned int dscp; |
921 | unsigned char vlan_priority; |
922 | unsigned int ret; |
923 | |
924 | /* skb->priority values from 256->263 are magic values to |
925 | * directly indicate a specific 802.1d priority. This is used |
926 | * to allow 802.1d priority to be passed directly in from VLAN |
927 | * tags, etc. |
928 | */ |
929 | if (skb->priority >= 256 && skb->priority <= 263) { |
930 | ret = skb->priority - 256; |
931 | goto out; |
932 | } |
933 | |
934 | if (skb_vlan_tag_present(skb)) { |
935 | vlan_priority = (skb_vlan_tag_get(skb) & VLAN_PRIO_MASK) |
936 | >> VLAN_PRIO_SHIFT; |
937 | if (vlan_priority > 0) { |
938 | ret = vlan_priority; |
939 | goto out; |
940 | } |
941 | } |
942 | |
943 | switch (skb->protocol) { |
944 | case htons(ETH_P_IP): |
945 | dscp = ipv4_get_dsfield(iph: ip_hdr(skb)) & 0xfc; |
946 | break; |
947 | case htons(ETH_P_IPV6): |
948 | dscp = ipv6_get_dsfield(ipv6h: ipv6_hdr(skb)) & 0xfc; |
949 | break; |
950 | case htons(ETH_P_MPLS_UC): |
951 | case htons(ETH_P_MPLS_MC): { |
952 | struct mpls_label mpls_tmp, *mpls; |
953 | |
954 | mpls = skb_header_pointer(skb, offset: sizeof(struct ethhdr), |
955 | len: sizeof(*mpls), buffer: &mpls_tmp); |
956 | if (!mpls) |
957 | return 0; |
958 | |
959 | ret = (ntohl(mpls->entry) & MPLS_LS_TC_MASK) |
960 | >> MPLS_LS_TC_SHIFT; |
961 | goto out; |
962 | } |
963 | case htons(ETH_P_80221): |
964 | /* 802.21 is always network control traffic */ |
965 | return 7; |
966 | default: |
967 | return 0; |
968 | } |
969 | |
970 | if (qos_map) { |
971 | unsigned int i, tmp_dscp = dscp >> 2; |
972 | |
973 | for (i = 0; i < qos_map->num_des; i++) { |
974 | if (tmp_dscp == qos_map->dscp_exception[i].dscp) { |
975 | ret = qos_map->dscp_exception[i].up; |
976 | goto out; |
977 | } |
978 | } |
979 | |
980 | for (i = 0; i < 8; i++) { |
981 | if (tmp_dscp >= qos_map->up[i].low && |
982 | tmp_dscp <= qos_map->up[i].high) { |
983 | ret = i; |
984 | goto out; |
985 | } |
986 | } |
987 | } |
988 | |
989 | /* The default mapping as defined Section 2.3 in RFC8325: The three |
990 | * Most Significant Bits (MSBs) of the DSCP are used as the |
991 | * corresponding L2 markings. |
992 | */ |
993 | ret = dscp >> 5; |
994 | |
995 | /* Handle specific DSCP values for which the default mapping (as |
996 | * described above) doesn't adhere to the intended usage of the DSCP |
997 | * value. See section 4 in RFC8325. Specifically, for the following |
998 | * Diffserv Service Classes no update is needed: |
999 | * - Standard: DF |
1000 | * - Low Priority Data: CS1 |
1001 | * - Multimedia Streaming: AF31, AF32, AF33 |
1002 | * - Multimedia Conferencing: AF41, AF42, AF43 |
1003 | * - Network Control Traffic: CS7 |
1004 | * - Real-Time Interactive: CS4 |
1005 | */ |
1006 | switch (dscp >> 2) { |
1007 | case 10: |
1008 | case 12: |
1009 | case 14: |
1010 | /* High throughput data: AF11, AF12, AF13 */ |
1011 | ret = 0; |
1012 | break; |
1013 | case 16: |
1014 | /* Operations, Administration, and Maintenance and Provisioning: |
1015 | * CS2 |
1016 | */ |
1017 | ret = 0; |
1018 | break; |
1019 | case 18: |
1020 | case 20: |
1021 | case 22: |
1022 | /* Low latency data: AF21, AF22, AF23 */ |
1023 | ret = 3; |
1024 | break; |
1025 | case 24: |
1026 | /* Broadcasting video: CS3 */ |
1027 | ret = 4; |
1028 | break; |
1029 | case 40: |
1030 | /* Signaling: CS5 */ |
1031 | ret = 5; |
1032 | break; |
1033 | case 44: |
1034 | /* Voice Admit: VA */ |
1035 | ret = 6; |
1036 | break; |
1037 | case 46: |
1038 | /* Telephony traffic: EF */ |
1039 | ret = 6; |
1040 | break; |
1041 | case 48: |
1042 | /* Network Control Traffic: CS6 */ |
1043 | ret = 7; |
1044 | break; |
1045 | } |
1046 | out: |
1047 | return array_index_nospec(ret, IEEE80211_NUM_TIDS); |
1048 | } |
1049 | EXPORT_SYMBOL(cfg80211_classify8021d); |
1050 | |
1051 | const struct element *ieee80211_bss_get_elem(struct cfg80211_bss *bss, u8 id) |
1052 | { |
1053 | const struct cfg80211_bss_ies *ies; |
1054 | |
1055 | ies = rcu_dereference(bss->ies); |
1056 | if (!ies) |
1057 | return NULL; |
1058 | |
1059 | return cfg80211_find_elem(eid: id, ies: ies->data, len: ies->len); |
1060 | } |
1061 | EXPORT_SYMBOL(ieee80211_bss_get_elem); |
1062 | |
1063 | void cfg80211_upload_connect_keys(struct wireless_dev *wdev) |
1064 | { |
1065 | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy: wdev->wiphy); |
1066 | struct net_device *dev = wdev->netdev; |
1067 | int i; |
1068 | |
1069 | if (!wdev->connect_keys) |
1070 | return; |
1071 | |
1072 | for (i = 0; i < 4; i++) { |
1073 | if (!wdev->connect_keys->params[i].cipher) |
1074 | continue; |
1075 | if (rdev_add_key(rdev, netdev: dev, link_id: -1, key_index: i, pairwise: false, NULL, |
1076 | params: &wdev->connect_keys->params[i])) { |
1077 | netdev_err(dev, format: "failed to set key %d\n" , i); |
1078 | continue; |
1079 | } |
1080 | if (wdev->connect_keys->def == i && |
1081 | rdev_set_default_key(rdev, netdev: dev, link_id: -1, key_index: i, unicast: true, multicast: true)) { |
1082 | netdev_err(dev, format: "failed to set defkey %d\n" , i); |
1083 | continue; |
1084 | } |
1085 | } |
1086 | |
1087 | kfree_sensitive(objp: wdev->connect_keys); |
1088 | wdev->connect_keys = NULL; |
1089 | } |
1090 | |
1091 | void cfg80211_process_wdev_events(struct wireless_dev *wdev) |
1092 | { |
1093 | struct cfg80211_event *ev; |
1094 | unsigned long flags; |
1095 | |
1096 | spin_lock_irqsave(&wdev->event_lock, flags); |
1097 | while (!list_empty(head: &wdev->event_list)) { |
1098 | ev = list_first_entry(&wdev->event_list, |
1099 | struct cfg80211_event, list); |
1100 | list_del(entry: &ev->list); |
1101 | spin_unlock_irqrestore(lock: &wdev->event_lock, flags); |
1102 | |
1103 | switch (ev->type) { |
1104 | case EVENT_CONNECT_RESULT: |
1105 | __cfg80211_connect_result( |
1106 | dev: wdev->netdev, |
1107 | params: &ev->cr, |
1108 | wextev: ev->cr.status == WLAN_STATUS_SUCCESS); |
1109 | break; |
1110 | case EVENT_ROAMED: |
1111 | __cfg80211_roamed(wdev, info: &ev->rm); |
1112 | break; |
1113 | case EVENT_DISCONNECTED: |
1114 | __cfg80211_disconnected(dev: wdev->netdev, |
1115 | ie: ev->dc.ie, ie_len: ev->dc.ie_len, |
1116 | reason: ev->dc.reason, |
1117 | from_ap: !ev->dc.locally_generated); |
1118 | break; |
1119 | case EVENT_IBSS_JOINED: |
1120 | __cfg80211_ibss_joined(dev: wdev->netdev, bssid: ev->ij.bssid, |
1121 | channel: ev->ij.channel); |
1122 | break; |
1123 | case EVENT_STOPPED: |
1124 | cfg80211_leave(rdev: wiphy_to_rdev(wiphy: wdev->wiphy), wdev); |
1125 | break; |
1126 | case EVENT_PORT_AUTHORIZED: |
1127 | __cfg80211_port_authorized(wdev, peer_addr: ev->pa.peer_addr, |
1128 | td_bitmap: ev->pa.td_bitmap, |
1129 | td_bitmap_len: ev->pa.td_bitmap_len); |
1130 | break; |
1131 | } |
1132 | |
1133 | kfree(objp: ev); |
1134 | |
1135 | spin_lock_irqsave(&wdev->event_lock, flags); |
1136 | } |
1137 | spin_unlock_irqrestore(lock: &wdev->event_lock, flags); |
1138 | } |
1139 | |
1140 | void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev) |
1141 | { |
1142 | struct wireless_dev *wdev; |
1143 | |
1144 | lockdep_assert_held(&rdev->wiphy.mtx); |
1145 | |
1146 | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) |
1147 | cfg80211_process_wdev_events(wdev); |
1148 | } |
1149 | |
1150 | int cfg80211_change_iface(struct cfg80211_registered_device *rdev, |
1151 | struct net_device *dev, enum nl80211_iftype ntype, |
1152 | struct vif_params *params) |
1153 | { |
1154 | int err; |
1155 | enum nl80211_iftype otype = dev->ieee80211_ptr->iftype; |
1156 | |
1157 | lockdep_assert_held(&rdev->wiphy.mtx); |
1158 | |
1159 | /* don't support changing VLANs, you just re-create them */ |
1160 | if (otype == NL80211_IFTYPE_AP_VLAN) |
1161 | return -EOPNOTSUPP; |
1162 | |
1163 | /* cannot change into P2P device or NAN */ |
1164 | if (ntype == NL80211_IFTYPE_P2P_DEVICE || |
1165 | ntype == NL80211_IFTYPE_NAN) |
1166 | return -EOPNOTSUPP; |
1167 | |
1168 | if (!rdev->ops->change_virtual_intf || |
1169 | !(rdev->wiphy.interface_modes & (1 << ntype))) |
1170 | return -EOPNOTSUPP; |
1171 | |
1172 | if (ntype != otype) { |
1173 | /* if it's part of a bridge, reject changing type to station/ibss */ |
1174 | if (netif_is_bridge_port(dev) && |
1175 | (ntype == NL80211_IFTYPE_ADHOC || |
1176 | ntype == NL80211_IFTYPE_STATION || |
1177 | ntype == NL80211_IFTYPE_P2P_CLIENT)) |
1178 | return -EBUSY; |
1179 | |
1180 | dev->ieee80211_ptr->use_4addr = false; |
1181 | rdev_set_qos_map(rdev, dev, NULL); |
1182 | |
1183 | switch (otype) { |
1184 | case NL80211_IFTYPE_AP: |
1185 | case NL80211_IFTYPE_P2P_GO: |
1186 | cfg80211_stop_ap(rdev, dev, link: -1, notify: true); |
1187 | break; |
1188 | case NL80211_IFTYPE_ADHOC: |
1189 | cfg80211_leave_ibss(rdev, dev, nowext: false); |
1190 | break; |
1191 | case NL80211_IFTYPE_STATION: |
1192 | case NL80211_IFTYPE_P2P_CLIENT: |
1193 | cfg80211_disconnect(rdev, dev, |
1194 | reason: WLAN_REASON_DEAUTH_LEAVING, wextev: true); |
1195 | break; |
1196 | case NL80211_IFTYPE_MESH_POINT: |
1197 | /* mesh should be handled? */ |
1198 | break; |
1199 | case NL80211_IFTYPE_OCB: |
1200 | cfg80211_leave_ocb(rdev, dev); |
1201 | break; |
1202 | default: |
1203 | break; |
1204 | } |
1205 | |
1206 | cfg80211_process_rdev_events(rdev); |
1207 | cfg80211_mlme_purge_registrations(wdev: dev->ieee80211_ptr); |
1208 | |
1209 | memset(&dev->ieee80211_ptr->u, 0, |
1210 | sizeof(dev->ieee80211_ptr->u)); |
1211 | memset(&dev->ieee80211_ptr->links, 0, |
1212 | sizeof(dev->ieee80211_ptr->links)); |
1213 | } |
1214 | |
1215 | err = rdev_change_virtual_intf(rdev, dev, type: ntype, params); |
1216 | |
1217 | WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype); |
1218 | |
1219 | if (!err && params && params->use_4addr != -1) |
1220 | dev->ieee80211_ptr->use_4addr = params->use_4addr; |
1221 | |
1222 | if (!err) { |
1223 | dev->priv_flags &= ~IFF_DONT_BRIDGE; |
1224 | switch (ntype) { |
1225 | case NL80211_IFTYPE_STATION: |
1226 | if (dev->ieee80211_ptr->use_4addr) |
1227 | break; |
1228 | fallthrough; |
1229 | case NL80211_IFTYPE_OCB: |
1230 | case NL80211_IFTYPE_P2P_CLIENT: |
1231 | case NL80211_IFTYPE_ADHOC: |
1232 | dev->priv_flags |= IFF_DONT_BRIDGE; |
1233 | break; |
1234 | case NL80211_IFTYPE_P2P_GO: |
1235 | case NL80211_IFTYPE_AP: |
1236 | case NL80211_IFTYPE_AP_VLAN: |
1237 | case NL80211_IFTYPE_MESH_POINT: |
1238 | /* bridging OK */ |
1239 | break; |
1240 | case NL80211_IFTYPE_MONITOR: |
1241 | /* monitor can't bridge anyway */ |
1242 | break; |
1243 | case NL80211_IFTYPE_UNSPECIFIED: |
1244 | case NUM_NL80211_IFTYPES: |
1245 | /* not happening */ |
1246 | break; |
1247 | case NL80211_IFTYPE_P2P_DEVICE: |
1248 | case NL80211_IFTYPE_WDS: |
1249 | case NL80211_IFTYPE_NAN: |
1250 | WARN_ON(1); |
1251 | break; |
1252 | } |
1253 | } |
1254 | |
1255 | if (!err && ntype != otype && netif_running(dev)) { |
1256 | cfg80211_update_iface_num(rdev, iftype: ntype, num: 1); |
1257 | cfg80211_update_iface_num(rdev, iftype: otype, num: -1); |
1258 | } |
1259 | |
1260 | return err; |
1261 | } |
1262 | |
1263 | static u32 cfg80211_calculate_bitrate_ht(struct rate_info *rate) |
1264 | { |
1265 | int modulation, streams, bitrate; |
1266 | |
1267 | /* the formula below does only work for MCS values smaller than 32 */ |
1268 | if (WARN_ON_ONCE(rate->mcs >= 32)) |
1269 | return 0; |
1270 | |
1271 | modulation = rate->mcs & 7; |
1272 | streams = (rate->mcs >> 3) + 1; |
1273 | |
1274 | bitrate = (rate->bw == RATE_INFO_BW_40) ? 13500000 : 6500000; |
1275 | |
1276 | if (modulation < 4) |
1277 | bitrate *= (modulation + 1); |
1278 | else if (modulation == 4) |
1279 | bitrate *= (modulation + 2); |
1280 | else |
1281 | bitrate *= (modulation + 3); |
1282 | |
1283 | bitrate *= streams; |
1284 | |
1285 | if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) |
1286 | bitrate = (bitrate / 9) * 10; |
1287 | |
1288 | /* do NOT round down here */ |
1289 | return (bitrate + 50000) / 100000; |
1290 | } |
1291 | |
1292 | static u32 cfg80211_calculate_bitrate_dmg(struct rate_info *rate) |
1293 | { |
1294 | static const u32 __mcs2bitrate[] = { |
1295 | /* control PHY */ |
1296 | [0] = 275, |
1297 | /* SC PHY */ |
1298 | [1] = 3850, |
1299 | [2] = 7700, |
1300 | [3] = 9625, |
1301 | [4] = 11550, |
1302 | [5] = 12512, /* 1251.25 mbps */ |
1303 | [6] = 15400, |
1304 | [7] = 19250, |
1305 | [8] = 23100, |
1306 | [9] = 25025, |
1307 | [10] = 30800, |
1308 | [11] = 38500, |
1309 | [12] = 46200, |
1310 | /* OFDM PHY */ |
1311 | [13] = 6930, |
1312 | [14] = 8662, /* 866.25 mbps */ |
1313 | [15] = 13860, |
1314 | [16] = 17325, |
1315 | [17] = 20790, |
1316 | [18] = 27720, |
1317 | [19] = 34650, |
1318 | [20] = 41580, |
1319 | [21] = 45045, |
1320 | [22] = 51975, |
1321 | [23] = 62370, |
1322 | [24] = 67568, /* 6756.75 mbps */ |
1323 | /* LP-SC PHY */ |
1324 | [25] = 6260, |
1325 | [26] = 8340, |
1326 | [27] = 11120, |
1327 | [28] = 12510, |
1328 | [29] = 16680, |
1329 | [30] = 22240, |
1330 | [31] = 25030, |
1331 | }; |
1332 | |
1333 | if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate))) |
1334 | return 0; |
1335 | |
1336 | return __mcs2bitrate[rate->mcs]; |
1337 | } |
1338 | |
1339 | static u32 cfg80211_calculate_bitrate_extended_sc_dmg(struct rate_info *rate) |
1340 | { |
1341 | static const u32 __mcs2bitrate[] = { |
1342 | [6 - 6] = 26950, /* MCS 9.1 : 2695.0 mbps */ |
1343 | [7 - 6] = 50050, /* MCS 12.1 */ |
1344 | [8 - 6] = 53900, |
1345 | [9 - 6] = 57750, |
1346 | [10 - 6] = 63900, |
1347 | [11 - 6] = 75075, |
1348 | [12 - 6] = 80850, |
1349 | }; |
1350 | |
1351 | /* Extended SC MCS not defined for base MCS below 6 or above 12 */ |
1352 | if (WARN_ON_ONCE(rate->mcs < 6 || rate->mcs > 12)) |
1353 | return 0; |
1354 | |
1355 | return __mcs2bitrate[rate->mcs - 6]; |
1356 | } |
1357 | |
1358 | static u32 cfg80211_calculate_bitrate_edmg(struct rate_info *rate) |
1359 | { |
1360 | static const u32 __mcs2bitrate[] = { |
1361 | /* control PHY */ |
1362 | [0] = 275, |
1363 | /* SC PHY */ |
1364 | [1] = 3850, |
1365 | [2] = 7700, |
1366 | [3] = 9625, |
1367 | [4] = 11550, |
1368 | [5] = 12512, /* 1251.25 mbps */ |
1369 | [6] = 13475, |
1370 | [7] = 15400, |
1371 | [8] = 19250, |
1372 | [9] = 23100, |
1373 | [10] = 25025, |
1374 | [11] = 26950, |
1375 | [12] = 30800, |
1376 | [13] = 38500, |
1377 | [14] = 46200, |
1378 | [15] = 50050, |
1379 | [16] = 53900, |
1380 | [17] = 57750, |
1381 | [18] = 69300, |
1382 | [19] = 75075, |
1383 | [20] = 80850, |
1384 | }; |
1385 | |
1386 | if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate))) |
1387 | return 0; |
1388 | |
1389 | return __mcs2bitrate[rate->mcs] * rate->n_bonded_ch; |
1390 | } |
1391 | |
1392 | static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate) |
1393 | { |
1394 | static const u32 base[4][12] = { |
1395 | { 6500000, |
1396 | 13000000, |
1397 | 19500000, |
1398 | 26000000, |
1399 | 39000000, |
1400 | 52000000, |
1401 | 58500000, |
1402 | 65000000, |
1403 | 78000000, |
1404 | /* not in the spec, but some devices use this: */ |
1405 | 86700000, |
1406 | 97500000, |
1407 | 108300000, |
1408 | }, |
1409 | { 13500000, |
1410 | 27000000, |
1411 | 40500000, |
1412 | 54000000, |
1413 | 81000000, |
1414 | 108000000, |
1415 | 121500000, |
1416 | 135000000, |
1417 | 162000000, |
1418 | 180000000, |
1419 | 202500000, |
1420 | 225000000, |
1421 | }, |
1422 | { 29300000, |
1423 | 58500000, |
1424 | 87800000, |
1425 | 117000000, |
1426 | 175500000, |
1427 | 234000000, |
1428 | 263300000, |
1429 | 292500000, |
1430 | 351000000, |
1431 | 390000000, |
1432 | 438800000, |
1433 | 487500000, |
1434 | }, |
1435 | { 58500000, |
1436 | 117000000, |
1437 | 175500000, |
1438 | 234000000, |
1439 | 351000000, |
1440 | 468000000, |
1441 | 526500000, |
1442 | 585000000, |
1443 | 702000000, |
1444 | 780000000, |
1445 | 877500000, |
1446 | 975000000, |
1447 | }, |
1448 | }; |
1449 | u32 bitrate; |
1450 | int idx; |
1451 | |
1452 | if (rate->mcs > 11) |
1453 | goto warn; |
1454 | |
1455 | switch (rate->bw) { |
1456 | case RATE_INFO_BW_160: |
1457 | idx = 3; |
1458 | break; |
1459 | case RATE_INFO_BW_80: |
1460 | idx = 2; |
1461 | break; |
1462 | case RATE_INFO_BW_40: |
1463 | idx = 1; |
1464 | break; |
1465 | case RATE_INFO_BW_5: |
1466 | case RATE_INFO_BW_10: |
1467 | default: |
1468 | goto warn; |
1469 | case RATE_INFO_BW_20: |
1470 | idx = 0; |
1471 | } |
1472 | |
1473 | bitrate = base[idx][rate->mcs]; |
1474 | bitrate *= rate->nss; |
1475 | |
1476 | if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) |
1477 | bitrate = (bitrate / 9) * 10; |
1478 | |
1479 | /* do NOT round down here */ |
1480 | return (bitrate + 50000) / 100000; |
1481 | warn: |
1482 | WARN_ONCE(1, "invalid rate bw=%d, mcs=%d, nss=%d\n" , |
1483 | rate->bw, rate->mcs, rate->nss); |
1484 | return 0; |
1485 | } |
1486 | |
1487 | static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate) |
1488 | { |
1489 | #define SCALE 6144 |
1490 | u32 mcs_divisors[14] = { |
1491 | 102399, /* 16.666666... */ |
1492 | 51201, /* 8.333333... */ |
1493 | 34134, /* 5.555555... */ |
1494 | 25599, /* 4.166666... */ |
1495 | 17067, /* 2.777777... */ |
1496 | 12801, /* 2.083333... */ |
1497 | 11377, /* 1.851725... */ |
1498 | 10239, /* 1.666666... */ |
1499 | 8532, /* 1.388888... */ |
1500 | 7680, /* 1.250000... */ |
1501 | 6828, /* 1.111111... */ |
1502 | 6144, /* 1.000000... */ |
1503 | 5690, /* 0.926106... */ |
1504 | 5120, /* 0.833333... */ |
1505 | }; |
1506 | u32 rates_160M[3] = { 960777777, 907400000, 816666666 }; |
1507 | u32 rates_969[3] = { 480388888, 453700000, 408333333 }; |
1508 | u32 rates_484[3] = { 229411111, 216666666, 195000000 }; |
1509 | u32 rates_242[3] = { 114711111, 108333333, 97500000 }; |
1510 | u32 rates_106[3] = { 40000000, 37777777, 34000000 }; |
1511 | u32 rates_52[3] = { 18820000, 17777777, 16000000 }; |
1512 | u32 rates_26[3] = { 9411111, 8888888, 8000000 }; |
1513 | u64 tmp; |
1514 | u32 result; |
1515 | |
1516 | if (WARN_ON_ONCE(rate->mcs > 13)) |
1517 | return 0; |
1518 | |
1519 | if (WARN_ON_ONCE(rate->he_gi > NL80211_RATE_INFO_HE_GI_3_2)) |
1520 | return 0; |
1521 | if (WARN_ON_ONCE(rate->he_ru_alloc > |
1522 | NL80211_RATE_INFO_HE_RU_ALLOC_2x996)) |
1523 | return 0; |
1524 | if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8)) |
1525 | return 0; |
1526 | |
1527 | if (rate->bw == RATE_INFO_BW_160) |
1528 | result = rates_160M[rate->he_gi]; |
1529 | else if (rate->bw == RATE_INFO_BW_80 || |
1530 | (rate->bw == RATE_INFO_BW_HE_RU && |
1531 | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_996)) |
1532 | result = rates_969[rate->he_gi]; |
1533 | else if (rate->bw == RATE_INFO_BW_40 || |
1534 | (rate->bw == RATE_INFO_BW_HE_RU && |
1535 | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_484)) |
1536 | result = rates_484[rate->he_gi]; |
1537 | else if (rate->bw == RATE_INFO_BW_20 || |
1538 | (rate->bw == RATE_INFO_BW_HE_RU && |
1539 | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_242)) |
1540 | result = rates_242[rate->he_gi]; |
1541 | else if (rate->bw == RATE_INFO_BW_HE_RU && |
1542 | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_106) |
1543 | result = rates_106[rate->he_gi]; |
1544 | else if (rate->bw == RATE_INFO_BW_HE_RU && |
1545 | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_52) |
1546 | result = rates_52[rate->he_gi]; |
1547 | else if (rate->bw == RATE_INFO_BW_HE_RU && |
1548 | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_26) |
1549 | result = rates_26[rate->he_gi]; |
1550 | else { |
1551 | WARN(1, "invalid HE MCS: bw:%d, ru:%d\n" , |
1552 | rate->bw, rate->he_ru_alloc); |
1553 | return 0; |
1554 | } |
1555 | |
1556 | /* now scale to the appropriate MCS */ |
1557 | tmp = result; |
1558 | tmp *= SCALE; |
1559 | do_div(tmp, mcs_divisors[rate->mcs]); |
1560 | result = tmp; |
1561 | |
1562 | /* and take NSS, DCM into account */ |
1563 | result = (result * rate->nss) / 8; |
1564 | if (rate->he_dcm) |
1565 | result /= 2; |
1566 | |
1567 | return result / 10000; |
1568 | } |
1569 | |
1570 | static u32 cfg80211_calculate_bitrate_eht(struct rate_info *rate) |
1571 | { |
1572 | #define SCALE 6144 |
1573 | static const u32 mcs_divisors[16] = { |
1574 | 102399, /* 16.666666... */ |
1575 | 51201, /* 8.333333... */ |
1576 | 34134, /* 5.555555... */ |
1577 | 25599, /* 4.166666... */ |
1578 | 17067, /* 2.777777... */ |
1579 | 12801, /* 2.083333... */ |
1580 | 11377, /* 1.851725... */ |
1581 | 10239, /* 1.666666... */ |
1582 | 8532, /* 1.388888... */ |
1583 | 7680, /* 1.250000... */ |
1584 | 6828, /* 1.111111... */ |
1585 | 6144, /* 1.000000... */ |
1586 | 5690, /* 0.926106... */ |
1587 | 5120, /* 0.833333... */ |
1588 | 409600, /* 66.666666... */ |
1589 | 204800, /* 33.333333... */ |
1590 | }; |
1591 | static const u32 rates_996[3] = { 480388888, 453700000, 408333333 }; |
1592 | static const u32 rates_484[3] = { 229411111, 216666666, 195000000 }; |
1593 | static const u32 rates_242[3] = { 114711111, 108333333, 97500000 }; |
1594 | static const u32 rates_106[3] = { 40000000, 37777777, 34000000 }; |
1595 | static const u32 rates_52[3] = { 18820000, 17777777, 16000000 }; |
1596 | static const u32 rates_26[3] = { 9411111, 8888888, 8000000 }; |
1597 | u64 tmp; |
1598 | u32 result; |
1599 | |
1600 | if (WARN_ON_ONCE(rate->mcs > 15)) |
1601 | return 0; |
1602 | if (WARN_ON_ONCE(rate->eht_gi > NL80211_RATE_INFO_EHT_GI_3_2)) |
1603 | return 0; |
1604 | if (WARN_ON_ONCE(rate->eht_ru_alloc > |
1605 | NL80211_RATE_INFO_EHT_RU_ALLOC_4x996)) |
1606 | return 0; |
1607 | if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8)) |
1608 | return 0; |
1609 | |
1610 | /* Bandwidth checks for MCS 14 */ |
1611 | if (rate->mcs == 14) { |
1612 | if ((rate->bw != RATE_INFO_BW_EHT_RU && |
1613 | rate->bw != RATE_INFO_BW_80 && |
1614 | rate->bw != RATE_INFO_BW_160 && |
1615 | rate->bw != RATE_INFO_BW_320) || |
1616 | (rate->bw == RATE_INFO_BW_EHT_RU && |
1617 | rate->eht_ru_alloc != NL80211_RATE_INFO_EHT_RU_ALLOC_996 && |
1618 | rate->eht_ru_alloc != NL80211_RATE_INFO_EHT_RU_ALLOC_2x996 && |
1619 | rate->eht_ru_alloc != NL80211_RATE_INFO_EHT_RU_ALLOC_4x996)) { |
1620 | WARN(1, "invalid EHT BW for MCS 14: bw:%d, ru:%d\n" , |
1621 | rate->bw, rate->eht_ru_alloc); |
1622 | return 0; |
1623 | } |
1624 | } |
1625 | |
1626 | if (rate->bw == RATE_INFO_BW_320 || |
1627 | (rate->bw == RATE_INFO_BW_EHT_RU && |
1628 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_4x996)) |
1629 | result = 4 * rates_996[rate->eht_gi]; |
1630 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1631 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484) |
1632 | result = 3 * rates_996[rate->eht_gi] + rates_484[rate->eht_gi]; |
1633 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1634 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_3x996) |
1635 | result = 3 * rates_996[rate->eht_gi]; |
1636 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1637 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484) |
1638 | result = 2 * rates_996[rate->eht_gi] + rates_484[rate->eht_gi]; |
1639 | else if (rate->bw == RATE_INFO_BW_160 || |
1640 | (rate->bw == RATE_INFO_BW_EHT_RU && |
1641 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_2x996)) |
1642 | result = 2 * rates_996[rate->eht_gi]; |
1643 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1644 | rate->eht_ru_alloc == |
1645 | NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242) |
1646 | result = rates_996[rate->eht_gi] + rates_484[rate->eht_gi] |
1647 | + rates_242[rate->eht_gi]; |
1648 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1649 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_996P484) |
1650 | result = rates_996[rate->eht_gi] + rates_484[rate->eht_gi]; |
1651 | else if (rate->bw == RATE_INFO_BW_80 || |
1652 | (rate->bw == RATE_INFO_BW_EHT_RU && |
1653 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_996)) |
1654 | result = rates_996[rate->eht_gi]; |
1655 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1656 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_484P242) |
1657 | result = rates_484[rate->eht_gi] + rates_242[rate->eht_gi]; |
1658 | else if (rate->bw == RATE_INFO_BW_40 || |
1659 | (rate->bw == RATE_INFO_BW_EHT_RU && |
1660 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_484)) |
1661 | result = rates_484[rate->eht_gi]; |
1662 | else if (rate->bw == RATE_INFO_BW_20 || |
1663 | (rate->bw == RATE_INFO_BW_EHT_RU && |
1664 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_242)) |
1665 | result = rates_242[rate->eht_gi]; |
1666 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1667 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_106P26) |
1668 | result = rates_106[rate->eht_gi] + rates_26[rate->eht_gi]; |
1669 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1670 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_106) |
1671 | result = rates_106[rate->eht_gi]; |
1672 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1673 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_52P26) |
1674 | result = rates_52[rate->eht_gi] + rates_26[rate->eht_gi]; |
1675 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1676 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_52) |
1677 | result = rates_52[rate->eht_gi]; |
1678 | else if (rate->bw == RATE_INFO_BW_EHT_RU && |
1679 | rate->eht_ru_alloc == NL80211_RATE_INFO_EHT_RU_ALLOC_26) |
1680 | result = rates_26[rate->eht_gi]; |
1681 | else { |
1682 | WARN(1, "invalid EHT MCS: bw:%d, ru:%d\n" , |
1683 | rate->bw, rate->eht_ru_alloc); |
1684 | return 0; |
1685 | } |
1686 | |
1687 | /* now scale to the appropriate MCS */ |
1688 | tmp = result; |
1689 | tmp *= SCALE; |
1690 | do_div(tmp, mcs_divisors[rate->mcs]); |
1691 | |
1692 | /* and take NSS */ |
1693 | tmp *= rate->nss; |
1694 | do_div(tmp, 8); |
1695 | |
1696 | result = tmp; |
1697 | |
1698 | return result / 10000; |
1699 | } |
1700 | |
1701 | static u32 cfg80211_calculate_bitrate_s1g(struct rate_info *rate) |
1702 | { |
1703 | /* For 1, 2, 4, 8 and 16 MHz channels */ |
1704 | static const u32 base[5][11] = { |
1705 | { 300000, |
1706 | 600000, |
1707 | 900000, |
1708 | 1200000, |
1709 | 1800000, |
1710 | 2400000, |
1711 | 2700000, |
1712 | 3000000, |
1713 | 3600000, |
1714 | 4000000, |
1715 | /* MCS 10 supported in 1 MHz only */ |
1716 | 150000, |
1717 | }, |
1718 | { 650000, |
1719 | 1300000, |
1720 | 1950000, |
1721 | 2600000, |
1722 | 3900000, |
1723 | 5200000, |
1724 | 5850000, |
1725 | 6500000, |
1726 | 7800000, |
1727 | /* MCS 9 not valid */ |
1728 | }, |
1729 | { 1350000, |
1730 | 2700000, |
1731 | 4050000, |
1732 | 5400000, |
1733 | 8100000, |
1734 | 10800000, |
1735 | 12150000, |
1736 | 13500000, |
1737 | 16200000, |
1738 | 18000000, |
1739 | }, |
1740 | { 2925000, |
1741 | 5850000, |
1742 | 8775000, |
1743 | 11700000, |
1744 | 17550000, |
1745 | 23400000, |
1746 | 26325000, |
1747 | 29250000, |
1748 | 35100000, |
1749 | 39000000, |
1750 | }, |
1751 | { 8580000, |
1752 | 11700000, |
1753 | 17550000, |
1754 | 23400000, |
1755 | 35100000, |
1756 | 46800000, |
1757 | 52650000, |
1758 | 58500000, |
1759 | 70200000, |
1760 | 78000000, |
1761 | }, |
1762 | }; |
1763 | u32 bitrate; |
1764 | /* default is 1 MHz index */ |
1765 | int idx = 0; |
1766 | |
1767 | if (rate->mcs >= 11) |
1768 | goto warn; |
1769 | |
1770 | switch (rate->bw) { |
1771 | case RATE_INFO_BW_16: |
1772 | idx = 4; |
1773 | break; |
1774 | case RATE_INFO_BW_8: |
1775 | idx = 3; |
1776 | break; |
1777 | case RATE_INFO_BW_4: |
1778 | idx = 2; |
1779 | break; |
1780 | case RATE_INFO_BW_2: |
1781 | idx = 1; |
1782 | break; |
1783 | case RATE_INFO_BW_1: |
1784 | idx = 0; |
1785 | break; |
1786 | case RATE_INFO_BW_5: |
1787 | case RATE_INFO_BW_10: |
1788 | case RATE_INFO_BW_20: |
1789 | case RATE_INFO_BW_40: |
1790 | case RATE_INFO_BW_80: |
1791 | case RATE_INFO_BW_160: |
1792 | default: |
1793 | goto warn; |
1794 | } |
1795 | |
1796 | bitrate = base[idx][rate->mcs]; |
1797 | bitrate *= rate->nss; |
1798 | |
1799 | if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) |
1800 | bitrate = (bitrate / 9) * 10; |
1801 | /* do NOT round down here */ |
1802 | return (bitrate + 50000) / 100000; |
1803 | warn: |
1804 | WARN_ONCE(1, "invalid rate bw=%d, mcs=%d, nss=%d\n" , |
1805 | rate->bw, rate->mcs, rate->nss); |
1806 | return 0; |
1807 | } |
1808 | |
1809 | u32 cfg80211_calculate_bitrate(struct rate_info *rate) |
1810 | { |
1811 | if (rate->flags & RATE_INFO_FLAGS_MCS) |
1812 | return cfg80211_calculate_bitrate_ht(rate); |
1813 | if (rate->flags & RATE_INFO_FLAGS_DMG) |
1814 | return cfg80211_calculate_bitrate_dmg(rate); |
1815 | if (rate->flags & RATE_INFO_FLAGS_EXTENDED_SC_DMG) |
1816 | return cfg80211_calculate_bitrate_extended_sc_dmg(rate); |
1817 | if (rate->flags & RATE_INFO_FLAGS_EDMG) |
1818 | return cfg80211_calculate_bitrate_edmg(rate); |
1819 | if (rate->flags & RATE_INFO_FLAGS_VHT_MCS) |
1820 | return cfg80211_calculate_bitrate_vht(rate); |
1821 | if (rate->flags & RATE_INFO_FLAGS_HE_MCS) |
1822 | return cfg80211_calculate_bitrate_he(rate); |
1823 | if (rate->flags & RATE_INFO_FLAGS_EHT_MCS) |
1824 | return cfg80211_calculate_bitrate_eht(rate); |
1825 | if (rate->flags & RATE_INFO_FLAGS_S1G_MCS) |
1826 | return cfg80211_calculate_bitrate_s1g(rate); |
1827 | |
1828 | return rate->legacy; |
1829 | } |
1830 | EXPORT_SYMBOL(cfg80211_calculate_bitrate); |
1831 | |
1832 | int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, |
1833 | enum ieee80211_p2p_attr_id attr, |
1834 | u8 *buf, unsigned int bufsize) |
1835 | { |
1836 | u8 *out = buf; |
1837 | u16 attr_remaining = 0; |
1838 | bool desired_attr = false; |
1839 | u16 desired_len = 0; |
1840 | |
1841 | while (len > 0) { |
1842 | unsigned int iedatalen; |
1843 | unsigned int copy; |
1844 | const u8 *iedata; |
1845 | |
1846 | if (len < 2) |
1847 | return -EILSEQ; |
1848 | iedatalen = ies[1]; |
1849 | if (iedatalen + 2 > len) |
1850 | return -EILSEQ; |
1851 | |
1852 | if (ies[0] != WLAN_EID_VENDOR_SPECIFIC) |
1853 | goto cont; |
1854 | |
1855 | if (iedatalen < 4) |
1856 | goto cont; |
1857 | |
1858 | iedata = ies + 2; |
1859 | |
1860 | /* check WFA OUI, P2P subtype */ |
1861 | if (iedata[0] != 0x50 || iedata[1] != 0x6f || |
1862 | iedata[2] != 0x9a || iedata[3] != 0x09) |
1863 | goto cont; |
1864 | |
1865 | iedatalen -= 4; |
1866 | iedata += 4; |
1867 | |
1868 | /* check attribute continuation into this IE */ |
1869 | copy = min_t(unsigned int, attr_remaining, iedatalen); |
1870 | if (copy && desired_attr) { |
1871 | desired_len += copy; |
1872 | if (out) { |
1873 | memcpy(out, iedata, min(bufsize, copy)); |
1874 | out += min(bufsize, copy); |
1875 | bufsize -= min(bufsize, copy); |
1876 | } |
1877 | |
1878 | |
1879 | if (copy == attr_remaining) |
1880 | return desired_len; |
1881 | } |
1882 | |
1883 | attr_remaining -= copy; |
1884 | if (attr_remaining) |
1885 | goto cont; |
1886 | |
1887 | iedatalen -= copy; |
1888 | iedata += copy; |
1889 | |
1890 | while (iedatalen > 0) { |
1891 | u16 attr_len; |
1892 | |
1893 | /* P2P attribute ID & size must fit */ |
1894 | if (iedatalen < 3) |
1895 | return -EILSEQ; |
1896 | desired_attr = iedata[0] == attr; |
1897 | attr_len = get_unaligned_le16(p: iedata + 1); |
1898 | iedatalen -= 3; |
1899 | iedata += 3; |
1900 | |
1901 | copy = min_t(unsigned int, attr_len, iedatalen); |
1902 | |
1903 | if (desired_attr) { |
1904 | desired_len += copy; |
1905 | if (out) { |
1906 | memcpy(out, iedata, min(bufsize, copy)); |
1907 | out += min(bufsize, copy); |
1908 | bufsize -= min(bufsize, copy); |
1909 | } |
1910 | |
1911 | if (copy == attr_len) |
1912 | return desired_len; |
1913 | } |
1914 | |
1915 | iedata += copy; |
1916 | iedatalen -= copy; |
1917 | attr_remaining = attr_len - copy; |
1918 | } |
1919 | |
1920 | cont: |
1921 | len -= ies[1] + 2; |
1922 | ies += ies[1] + 2; |
1923 | } |
1924 | |
1925 | if (attr_remaining && desired_attr) |
1926 | return -EILSEQ; |
1927 | |
1928 | return -ENOENT; |
1929 | } |
1930 | EXPORT_SYMBOL(cfg80211_get_p2p_attr); |
1931 | |
1932 | static bool ieee80211_id_in_list(const u8 *ids, int n_ids, u8 id, bool id_ext) |
1933 | { |
1934 | int i; |
1935 | |
1936 | /* Make sure array values are legal */ |
1937 | if (WARN_ON(ids[n_ids - 1] == WLAN_EID_EXTENSION)) |
1938 | return false; |
1939 | |
1940 | i = 0; |
1941 | while (i < n_ids) { |
1942 | if (ids[i] == WLAN_EID_EXTENSION) { |
1943 | if (id_ext && (ids[i + 1] == id)) |
1944 | return true; |
1945 | |
1946 | i += 2; |
1947 | continue; |
1948 | } |
1949 | |
1950 | if (ids[i] == id && !id_ext) |
1951 | return true; |
1952 | |
1953 | i++; |
1954 | } |
1955 | return false; |
1956 | } |
1957 | |
1958 | static size_t skip_ie(const u8 *ies, size_t ielen, size_t pos) |
1959 | { |
1960 | /* we assume a validly formed IEs buffer */ |
1961 | u8 len = ies[pos + 1]; |
1962 | |
1963 | pos += 2 + len; |
1964 | |
1965 | /* the IE itself must have 255 bytes for fragments to follow */ |
1966 | if (len < 255) |
1967 | return pos; |
1968 | |
1969 | while (pos < ielen && ies[pos] == WLAN_EID_FRAGMENT) { |
1970 | len = ies[pos + 1]; |
1971 | pos += 2 + len; |
1972 | } |
1973 | |
1974 | return pos; |
1975 | } |
1976 | |
1977 | size_t ieee80211_ie_split_ric(const u8 *ies, size_t ielen, |
1978 | const u8 *ids, int n_ids, |
1979 | const u8 *after_ric, int n_after_ric, |
1980 | size_t offset) |
1981 | { |
1982 | size_t pos = offset; |
1983 | |
1984 | while (pos < ielen) { |
1985 | u8 ext = 0; |
1986 | |
1987 | if (ies[pos] == WLAN_EID_EXTENSION) |
1988 | ext = 2; |
1989 | if ((pos + ext) >= ielen) |
1990 | break; |
1991 | |
1992 | if (!ieee80211_id_in_list(ids, n_ids, id: ies[pos + ext], |
1993 | id_ext: ies[pos] == WLAN_EID_EXTENSION)) |
1994 | break; |
1995 | |
1996 | if (ies[pos] == WLAN_EID_RIC_DATA && n_after_ric) { |
1997 | pos = skip_ie(ies, ielen, pos); |
1998 | |
1999 | while (pos < ielen) { |
2000 | if (ies[pos] == WLAN_EID_EXTENSION) |
2001 | ext = 2; |
2002 | else |
2003 | ext = 0; |
2004 | |
2005 | if ((pos + ext) >= ielen) |
2006 | break; |
2007 | |
2008 | if (!ieee80211_id_in_list(ids: after_ric, |
2009 | n_ids: n_after_ric, |
2010 | id: ies[pos + ext], |
2011 | id_ext: ext == 2)) |
2012 | pos = skip_ie(ies, ielen, pos); |
2013 | else |
2014 | break; |
2015 | } |
2016 | } else { |
2017 | pos = skip_ie(ies, ielen, pos); |
2018 | } |
2019 | } |
2020 | |
2021 | return pos; |
2022 | } |
2023 | EXPORT_SYMBOL(ieee80211_ie_split_ric); |
2024 | |
2025 | void ieee80211_fragment_element(struct sk_buff *skb, u8 *len_pos, u8 frag_id) |
2026 | { |
2027 | unsigned int elem_len; |
2028 | |
2029 | if (!len_pos) |
2030 | return; |
2031 | |
2032 | elem_len = skb->data + skb->len - len_pos - 1; |
2033 | |
2034 | while (elem_len > 255) { |
2035 | /* this one is 255 */ |
2036 | *len_pos = 255; |
2037 | /* remaining data gets smaller */ |
2038 | elem_len -= 255; |
2039 | /* make space for the fragment ID/len in SKB */ |
2040 | skb_put(skb, len: 2); |
2041 | /* shift back the remaining data to place fragment ID/len */ |
2042 | memmove(len_pos + 255 + 3, len_pos + 255 + 1, elem_len); |
2043 | /* place the fragment ID */ |
2044 | len_pos += 255 + 1; |
2045 | *len_pos = frag_id; |
2046 | /* and point to fragment length to update later */ |
2047 | len_pos++; |
2048 | } |
2049 | |
2050 | *len_pos = elem_len; |
2051 | } |
2052 | EXPORT_SYMBOL(ieee80211_fragment_element); |
2053 | |
2054 | bool ieee80211_operating_class_to_band(u8 operating_class, |
2055 | enum nl80211_band *band) |
2056 | { |
2057 | switch (operating_class) { |
2058 | case 112: |
2059 | case 115 ... 127: |
2060 | case 128 ... 130: |
2061 | *band = NL80211_BAND_5GHZ; |
2062 | return true; |
2063 | case 131 ... 135: |
2064 | case 137: |
2065 | *band = NL80211_BAND_6GHZ; |
2066 | return true; |
2067 | case 81: |
2068 | case 82: |
2069 | case 83: |
2070 | case 84: |
2071 | *band = NL80211_BAND_2GHZ; |
2072 | return true; |
2073 | case 180: |
2074 | *band = NL80211_BAND_60GHZ; |
2075 | return true; |
2076 | } |
2077 | |
2078 | return false; |
2079 | } |
2080 | EXPORT_SYMBOL(ieee80211_operating_class_to_band); |
2081 | |
2082 | bool ieee80211_operating_class_to_chandef(u8 operating_class, |
2083 | struct ieee80211_channel *chan, |
2084 | struct cfg80211_chan_def *chandef) |
2085 | { |
2086 | u32 control_freq, offset = 0; |
2087 | enum nl80211_band band; |
2088 | |
2089 | if (!ieee80211_operating_class_to_band(operating_class, &band) || |
2090 | !chan || band != chan->band) |
2091 | return false; |
2092 | |
2093 | control_freq = chan->center_freq; |
2094 | chandef->chan = chan; |
2095 | |
2096 | if (control_freq >= 5955) |
2097 | offset = control_freq - 5955; |
2098 | else if (control_freq >= 5745) |
2099 | offset = control_freq - 5745; |
2100 | else if (control_freq >= 5180) |
2101 | offset = control_freq - 5180; |
2102 | offset /= 20; |
2103 | |
2104 | switch (operating_class) { |
2105 | case 81: /* 2 GHz band; 20 MHz; channels 1..13 */ |
2106 | case 82: /* 2 GHz band; 20 MHz; channel 14 */ |
2107 | case 115: /* 5 GHz band; 20 MHz; channels 36,40,44,48 */ |
2108 | case 118: /* 5 GHz band; 20 MHz; channels 52,56,60,64 */ |
2109 | case 121: /* 5 GHz band; 20 MHz; channels 100..144 */ |
2110 | case 124: /* 5 GHz band; 20 MHz; channels 149,153,157,161 */ |
2111 | case 125: /* 5 GHz band; 20 MHz; channels 149..177 */ |
2112 | case 131: /* 6 GHz band; 20 MHz; channels 1..233*/ |
2113 | case 136: /* 6 GHz band; 20 MHz; channel 2 */ |
2114 | chandef->center_freq1 = control_freq; |
2115 | chandef->width = NL80211_CHAN_WIDTH_20; |
2116 | return true; |
2117 | case 83: /* 2 GHz band; 40 MHz; channels 1..9 */ |
2118 | case 116: /* 5 GHz band; 40 MHz; channels 36,44 */ |
2119 | case 119: /* 5 GHz band; 40 MHz; channels 52,60 */ |
2120 | case 122: /* 5 GHz band; 40 MHz; channels 100,108,116,124,132,140 */ |
2121 | case 126: /* 5 GHz band; 40 MHz; channels 149,157,165,173 */ |
2122 | chandef->center_freq1 = control_freq + 10; |
2123 | chandef->width = NL80211_CHAN_WIDTH_40; |
2124 | return true; |
2125 | case 84: /* 2 GHz band; 40 MHz; channels 5..13 */ |
2126 | case 117: /* 5 GHz band; 40 MHz; channels 40,48 */ |
2127 | case 120: /* 5 GHz band; 40 MHz; channels 56,64 */ |
2128 | case 123: /* 5 GHz band; 40 MHz; channels 104,112,120,128,136,144 */ |
2129 | case 127: /* 5 GHz band; 40 MHz; channels 153,161,169,177 */ |
2130 | chandef->center_freq1 = control_freq - 10; |
2131 | chandef->width = NL80211_CHAN_WIDTH_40; |
2132 | return true; |
2133 | case 132: /* 6 GHz band; 40 MHz; channels 1,5,..,229*/ |
2134 | chandef->center_freq1 = control_freq + 10 - (offset & 1) * 20; |
2135 | chandef->width = NL80211_CHAN_WIDTH_40; |
2136 | return true; |
2137 | case 128: /* 5 GHz band; 80 MHz; channels 36..64,100..144,149..177 */ |
2138 | case 133: /* 6 GHz band; 80 MHz; channels 1,5,..,229 */ |
2139 | chandef->center_freq1 = control_freq + 30 - (offset & 3) * 20; |
2140 | chandef->width = NL80211_CHAN_WIDTH_80; |
2141 | return true; |
2142 | case 129: /* 5 GHz band; 160 MHz; channels 36..64,100..144,149..177 */ |
2143 | case 134: /* 6 GHz band; 160 MHz; channels 1,5,..,229 */ |
2144 | chandef->center_freq1 = control_freq + 70 - (offset & 7) * 20; |
2145 | chandef->width = NL80211_CHAN_WIDTH_160; |
2146 | return true; |
2147 | case 130: /* 5 GHz band; 80+80 MHz; channels 36..64,100..144,149..177 */ |
2148 | case 135: /* 6 GHz band; 80+80 MHz; channels 1,5,..,229 */ |
2149 | /* The center_freq2 of 80+80 MHz is unknown */ |
2150 | case 137: /* 6 GHz band; 320 MHz; channels 1,5,..,229 */ |
2151 | /* 320-1 or 320-2 channelization is unknown */ |
2152 | default: |
2153 | return false; |
2154 | } |
2155 | } |
2156 | EXPORT_SYMBOL(ieee80211_operating_class_to_chandef); |
2157 | |
2158 | bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef, |
2159 | u8 *op_class) |
2160 | { |
2161 | u8 vht_opclass; |
2162 | u32 freq = chandef->center_freq1; |
2163 | |
2164 | if (freq >= 2412 && freq <= 2472) { |
2165 | if (chandef->width > NL80211_CHAN_WIDTH_40) |
2166 | return false; |
2167 | |
2168 | /* 2.407 GHz, channels 1..13 */ |
2169 | if (chandef->width == NL80211_CHAN_WIDTH_40) { |
2170 | if (freq > chandef->chan->center_freq) |
2171 | *op_class = 83; /* HT40+ */ |
2172 | else |
2173 | *op_class = 84; /* HT40- */ |
2174 | } else { |
2175 | *op_class = 81; |
2176 | } |
2177 | |
2178 | return true; |
2179 | } |
2180 | |
2181 | if (freq == 2484) { |
2182 | /* channel 14 is only for IEEE 802.11b */ |
2183 | if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT) |
2184 | return false; |
2185 | |
2186 | *op_class = 82; /* channel 14 */ |
2187 | return true; |
2188 | } |
2189 | |
2190 | switch (chandef->width) { |
2191 | case NL80211_CHAN_WIDTH_80: |
2192 | vht_opclass = 128; |
2193 | break; |
2194 | case NL80211_CHAN_WIDTH_160: |
2195 | vht_opclass = 129; |
2196 | break; |
2197 | case NL80211_CHAN_WIDTH_80P80: |
2198 | vht_opclass = 130; |
2199 | break; |
2200 | case NL80211_CHAN_WIDTH_10: |
2201 | case NL80211_CHAN_WIDTH_5: |
2202 | return false; /* unsupported for now */ |
2203 | default: |
2204 | vht_opclass = 0; |
2205 | break; |
2206 | } |
2207 | |
2208 | /* 5 GHz, channels 36..48 */ |
2209 | if (freq >= 5180 && freq <= 5240) { |
2210 | if (vht_opclass) { |
2211 | *op_class = vht_opclass; |
2212 | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { |
2213 | if (freq > chandef->chan->center_freq) |
2214 | *op_class = 116; |
2215 | else |
2216 | *op_class = 117; |
2217 | } else { |
2218 | *op_class = 115; |
2219 | } |
2220 | |
2221 | return true; |
2222 | } |
2223 | |
2224 | /* 5 GHz, channels 52..64 */ |
2225 | if (freq >= 5260 && freq <= 5320) { |
2226 | if (vht_opclass) { |
2227 | *op_class = vht_opclass; |
2228 | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { |
2229 | if (freq > chandef->chan->center_freq) |
2230 | *op_class = 119; |
2231 | else |
2232 | *op_class = 120; |
2233 | } else { |
2234 | *op_class = 118; |
2235 | } |
2236 | |
2237 | return true; |
2238 | } |
2239 | |
2240 | /* 5 GHz, channels 100..144 */ |
2241 | if (freq >= 5500 && freq <= 5720) { |
2242 | if (vht_opclass) { |
2243 | *op_class = vht_opclass; |
2244 | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { |
2245 | if (freq > chandef->chan->center_freq) |
2246 | *op_class = 122; |
2247 | else |
2248 | *op_class = 123; |
2249 | } else { |
2250 | *op_class = 121; |
2251 | } |
2252 | |
2253 | return true; |
2254 | } |
2255 | |
2256 | /* 5 GHz, channels 149..169 */ |
2257 | if (freq >= 5745 && freq <= 5845) { |
2258 | if (vht_opclass) { |
2259 | *op_class = vht_opclass; |
2260 | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { |
2261 | if (freq > chandef->chan->center_freq) |
2262 | *op_class = 126; |
2263 | else |
2264 | *op_class = 127; |
2265 | } else if (freq <= 5805) { |
2266 | *op_class = 124; |
2267 | } else { |
2268 | *op_class = 125; |
2269 | } |
2270 | |
2271 | return true; |
2272 | } |
2273 | |
2274 | /* 56.16 GHz, channel 1..4 */ |
2275 | if (freq >= 56160 + 2160 * 1 && freq <= 56160 + 2160 * 6) { |
2276 | if (chandef->width >= NL80211_CHAN_WIDTH_40) |
2277 | return false; |
2278 | |
2279 | *op_class = 180; |
2280 | return true; |
2281 | } |
2282 | |
2283 | /* not supported yet */ |
2284 | return false; |
2285 | } |
2286 | EXPORT_SYMBOL(ieee80211_chandef_to_operating_class); |
2287 | |
2288 | static int cfg80211_wdev_bi(struct wireless_dev *wdev) |
2289 | { |
2290 | switch (wdev->iftype) { |
2291 | case NL80211_IFTYPE_AP: |
2292 | case NL80211_IFTYPE_P2P_GO: |
2293 | WARN_ON(wdev->valid_links); |
2294 | return wdev->links[0].ap.beacon_interval; |
2295 | case NL80211_IFTYPE_MESH_POINT: |
2296 | return wdev->u.mesh.beacon_interval; |
2297 | case NL80211_IFTYPE_ADHOC: |
2298 | return wdev->u.ibss.beacon_interval; |
2299 | default: |
2300 | break; |
2301 | } |
2302 | |
2303 | return 0; |
2304 | } |
2305 | |
2306 | static void cfg80211_calculate_bi_data(struct wiphy *wiphy, u32 new_beacon_int, |
2307 | u32 *beacon_int_gcd, |
2308 | bool *beacon_int_different) |
2309 | { |
2310 | struct wireless_dev *wdev; |
2311 | |
2312 | *beacon_int_gcd = 0; |
2313 | *beacon_int_different = false; |
2314 | |
2315 | list_for_each_entry(wdev, &wiphy->wdev_list, list) { |
2316 | int wdev_bi; |
2317 | |
2318 | /* this feature isn't supported with MLO */ |
2319 | if (wdev->valid_links) |
2320 | continue; |
2321 | |
2322 | wdev_bi = cfg80211_wdev_bi(wdev); |
2323 | |
2324 | if (!wdev_bi) |
2325 | continue; |
2326 | |
2327 | if (!*beacon_int_gcd) { |
2328 | *beacon_int_gcd = wdev_bi; |
2329 | continue; |
2330 | } |
2331 | |
2332 | if (wdev_bi == *beacon_int_gcd) |
2333 | continue; |
2334 | |
2335 | *beacon_int_different = true; |
2336 | *beacon_int_gcd = gcd(a: *beacon_int_gcd, b: wdev_bi); |
2337 | } |
2338 | |
2339 | if (new_beacon_int && *beacon_int_gcd != new_beacon_int) { |
2340 | if (*beacon_int_gcd) |
2341 | *beacon_int_different = true; |
2342 | *beacon_int_gcd = gcd(a: *beacon_int_gcd, b: new_beacon_int); |
2343 | } |
2344 | } |
2345 | |
2346 | int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev, |
2347 | enum nl80211_iftype iftype, u32 beacon_int) |
2348 | { |
2349 | /* |
2350 | * This is just a basic pre-condition check; if interface combinations |
2351 | * are possible the driver must already be checking those with a call |
2352 | * to cfg80211_check_combinations(), in which case we'll validate more |
2353 | * through the cfg80211_calculate_bi_data() call and code in |
2354 | * cfg80211_iter_combinations(). |
2355 | */ |
2356 | |
2357 | if (beacon_int < 10 || beacon_int > 10000) |
2358 | return -EINVAL; |
2359 | |
2360 | return 0; |
2361 | } |
2362 | |
2363 | int cfg80211_iter_combinations(struct wiphy *wiphy, |
2364 | struct iface_combination_params *params, |
2365 | void (*iter)(const struct ieee80211_iface_combination *c, |
2366 | void *data), |
2367 | void *data) |
2368 | { |
2369 | const struct ieee80211_regdomain *regdom; |
2370 | enum nl80211_dfs_regions region = 0; |
2371 | int i, j, iftype; |
2372 | int num_interfaces = 0; |
2373 | u32 used_iftypes = 0; |
2374 | u32 beacon_int_gcd; |
2375 | bool beacon_int_different; |
2376 | |
2377 | /* |
2378 | * This is a bit strange, since the iteration used to rely only on |
2379 | * the data given by the driver, but here it now relies on context, |
2380 | * in form of the currently operating interfaces. |
2381 | * This is OK for all current users, and saves us from having to |
2382 | * push the GCD calculations into all the drivers. |
2383 | * In the future, this should probably rely more on data that's in |
2384 | * cfg80211 already - the only thing not would appear to be any new |
2385 | * interfaces (while being brought up) and channel/radar data. |
2386 | */ |
2387 | cfg80211_calculate_bi_data(wiphy, new_beacon_int: params->new_beacon_int, |
2388 | beacon_int_gcd: &beacon_int_gcd, beacon_int_different: &beacon_int_different); |
2389 | |
2390 | if (params->radar_detect) { |
2391 | rcu_read_lock(); |
2392 | regdom = rcu_dereference(cfg80211_regdomain); |
2393 | if (regdom) |
2394 | region = regdom->dfs_region; |
2395 | rcu_read_unlock(); |
2396 | } |
2397 | |
2398 | for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { |
2399 | num_interfaces += params->iftype_num[iftype]; |
2400 | if (params->iftype_num[iftype] > 0 && |
2401 | !cfg80211_iftype_allowed(wiphy, iftype, is_4addr: 0, check_swif: 1)) |
2402 | used_iftypes |= BIT(iftype); |
2403 | } |
2404 | |
2405 | for (i = 0; i < wiphy->n_iface_combinations; i++) { |
2406 | const struct ieee80211_iface_combination *c; |
2407 | struct ieee80211_iface_limit *limits; |
2408 | u32 all_iftypes = 0; |
2409 | |
2410 | c = &wiphy->iface_combinations[i]; |
2411 | |
2412 | if (num_interfaces > c->max_interfaces) |
2413 | continue; |
2414 | if (params->num_different_channels > c->num_different_channels) |
2415 | continue; |
2416 | |
2417 | limits = kmemdup(p: c->limits, size: sizeof(limits[0]) * c->n_limits, |
2418 | GFP_KERNEL); |
2419 | if (!limits) |
2420 | return -ENOMEM; |
2421 | |
2422 | for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { |
2423 | if (cfg80211_iftype_allowed(wiphy, iftype, is_4addr: 0, check_swif: 1)) |
2424 | continue; |
2425 | for (j = 0; j < c->n_limits; j++) { |
2426 | all_iftypes |= limits[j].types; |
2427 | if (!(limits[j].types & BIT(iftype))) |
2428 | continue; |
2429 | if (limits[j].max < params->iftype_num[iftype]) |
2430 | goto cont; |
2431 | limits[j].max -= params->iftype_num[iftype]; |
2432 | } |
2433 | } |
2434 | |
2435 | if (params->radar_detect != |
2436 | (c->radar_detect_widths & params->radar_detect)) |
2437 | goto cont; |
2438 | |
2439 | if (params->radar_detect && c->radar_detect_regions && |
2440 | !(c->radar_detect_regions & BIT(region))) |
2441 | goto cont; |
2442 | |
2443 | /* Finally check that all iftypes that we're currently |
2444 | * using are actually part of this combination. If they |
2445 | * aren't then we can't use this combination and have |
2446 | * to continue to the next. |
2447 | */ |
2448 | if ((all_iftypes & used_iftypes) != used_iftypes) |
2449 | goto cont; |
2450 | |
2451 | if (beacon_int_gcd) { |
2452 | if (c->beacon_int_min_gcd && |
2453 | beacon_int_gcd < c->beacon_int_min_gcd) |
2454 | goto cont; |
2455 | if (!c->beacon_int_min_gcd && beacon_int_different) |
2456 | goto cont; |
2457 | } |
2458 | |
2459 | /* This combination covered all interface types and |
2460 | * supported the requested numbers, so we're good. |
2461 | */ |
2462 | |
2463 | (*iter)(c, data); |
2464 | cont: |
2465 | kfree(objp: limits); |
2466 | } |
2467 | |
2468 | return 0; |
2469 | } |
2470 | EXPORT_SYMBOL(cfg80211_iter_combinations); |
2471 | |
2472 | static void |
2473 | cfg80211_iter_sum_ifcombs(const struct ieee80211_iface_combination *c, |
2474 | void *data) |
2475 | { |
2476 | int *num = data; |
2477 | (*num)++; |
2478 | } |
2479 | |
2480 | int cfg80211_check_combinations(struct wiphy *wiphy, |
2481 | struct iface_combination_params *params) |
2482 | { |
2483 | int err, num = 0; |
2484 | |
2485 | err = cfg80211_iter_combinations(wiphy, params, |
2486 | cfg80211_iter_sum_ifcombs, &num); |
2487 | if (err) |
2488 | return err; |
2489 | if (num == 0) |
2490 | return -EBUSY; |
2491 | |
2492 | return 0; |
2493 | } |
2494 | EXPORT_SYMBOL(cfg80211_check_combinations); |
2495 | |
2496 | int ieee80211_get_ratemask(struct ieee80211_supported_band *sband, |
2497 | const u8 *rates, unsigned int n_rates, |
2498 | u32 *mask) |
2499 | { |
2500 | int i, j; |
2501 | |
2502 | if (!sband) |
2503 | return -EINVAL; |
2504 | |
2505 | if (n_rates == 0 || n_rates > NL80211_MAX_SUPP_RATES) |
2506 | return -EINVAL; |
2507 | |
2508 | *mask = 0; |
2509 | |
2510 | for (i = 0; i < n_rates; i++) { |
2511 | int rate = (rates[i] & 0x7f) * 5; |
2512 | bool found = false; |
2513 | |
2514 | for (j = 0; j < sband->n_bitrates; j++) { |
2515 | if (sband->bitrates[j].bitrate == rate) { |
2516 | found = true; |
2517 | *mask |= BIT(j); |
2518 | break; |
2519 | } |
2520 | } |
2521 | if (!found) |
2522 | return -EINVAL; |
2523 | } |
2524 | |
2525 | /* |
2526 | * mask must have at least one bit set here since we |
2527 | * didn't accept a 0-length rates array nor allowed |
2528 | * entries in the array that didn't exist |
2529 | */ |
2530 | |
2531 | return 0; |
2532 | } |
2533 | |
2534 | unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy) |
2535 | { |
2536 | enum nl80211_band band; |
2537 | unsigned int n_channels = 0; |
2538 | |
2539 | for (band = 0; band < NUM_NL80211_BANDS; band++) |
2540 | if (wiphy->bands[band]) |
2541 | n_channels += wiphy->bands[band]->n_channels; |
2542 | |
2543 | return n_channels; |
2544 | } |
2545 | EXPORT_SYMBOL(ieee80211_get_num_supported_channels); |
2546 | |
2547 | int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, |
2548 | struct station_info *sinfo) |
2549 | { |
2550 | struct cfg80211_registered_device *rdev; |
2551 | struct wireless_dev *wdev; |
2552 | |
2553 | wdev = dev->ieee80211_ptr; |
2554 | if (!wdev) |
2555 | return -EOPNOTSUPP; |
2556 | |
2557 | rdev = wiphy_to_rdev(wiphy: wdev->wiphy); |
2558 | if (!rdev->ops->get_station) |
2559 | return -EOPNOTSUPP; |
2560 | |
2561 | memset(sinfo, 0, sizeof(*sinfo)); |
2562 | |
2563 | return rdev_get_station(rdev, dev, mac: mac_addr, sinfo); |
2564 | } |
2565 | EXPORT_SYMBOL(cfg80211_get_station); |
2566 | |
2567 | void cfg80211_free_nan_func(struct cfg80211_nan_func *f) |
2568 | { |
2569 | int i; |
2570 | |
2571 | if (!f) |
2572 | return; |
2573 | |
2574 | kfree(objp: f->serv_spec_info); |
2575 | kfree(objp: f->srf_bf); |
2576 | kfree(objp: f->srf_macs); |
2577 | for (i = 0; i < f->num_rx_filters; i++) |
2578 | kfree(objp: f->rx_filters[i].filter); |
2579 | |
2580 | for (i = 0; i < f->num_tx_filters; i++) |
2581 | kfree(objp: f->tx_filters[i].filter); |
2582 | |
2583 | kfree(objp: f->rx_filters); |
2584 | kfree(objp: f->tx_filters); |
2585 | kfree(objp: f); |
2586 | } |
2587 | EXPORT_SYMBOL(cfg80211_free_nan_func); |
2588 | |
2589 | bool cfg80211_does_bw_fit_range(const struct ieee80211_freq_range *freq_range, |
2590 | u32 center_freq_khz, u32 bw_khz) |
2591 | { |
2592 | u32 start_freq_khz, end_freq_khz; |
2593 | |
2594 | start_freq_khz = center_freq_khz - (bw_khz / 2); |
2595 | end_freq_khz = center_freq_khz + (bw_khz / 2); |
2596 | |
2597 | if (start_freq_khz >= freq_range->start_freq_khz && |
2598 | end_freq_khz <= freq_range->end_freq_khz) |
2599 | return true; |
2600 | |
2601 | return false; |
2602 | } |
2603 | |
2604 | int cfg80211_sinfo_alloc_tid_stats(struct station_info *sinfo, gfp_t gfp) |
2605 | { |
2606 | sinfo->pertid = kcalloc(IEEE80211_NUM_TIDS + 1, |
2607 | size: sizeof(*(sinfo->pertid)), |
2608 | flags: gfp); |
2609 | if (!sinfo->pertid) |
2610 | return -ENOMEM; |
2611 | |
2612 | return 0; |
2613 | } |
2614 | EXPORT_SYMBOL(cfg80211_sinfo_alloc_tid_stats); |
2615 | |
2616 | /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ |
2617 | /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ |
2618 | const unsigned char [] __aligned(2) = |
2619 | { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; |
2620 | EXPORT_SYMBOL(rfc1042_header); |
2621 | |
2622 | /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ |
2623 | const unsigned char [] __aligned(2) = |
2624 | { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; |
2625 | EXPORT_SYMBOL(bridge_tunnel_header); |
2626 | |
2627 | /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ |
2628 | struct iapp_layer2_update { |
2629 | u8 da[ETH_ALEN]; /* broadcast */ |
2630 | u8 sa[ETH_ALEN]; /* STA addr */ |
2631 | __be16 len; /* 6 */ |
2632 | u8 dsap; /* 0 */ |
2633 | u8 ssap; /* 0 */ |
2634 | u8 control; |
2635 | u8 xid_info[3]; |
2636 | } __packed; |
2637 | |
2638 | void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr) |
2639 | { |
2640 | struct iapp_layer2_update *msg; |
2641 | struct sk_buff *skb; |
2642 | |
2643 | /* Send Level 2 Update Frame to update forwarding tables in layer 2 |
2644 | * bridge devices */ |
2645 | |
2646 | skb = dev_alloc_skb(length: sizeof(*msg)); |
2647 | if (!skb) |
2648 | return; |
2649 | msg = skb_put(skb, len: sizeof(*msg)); |
2650 | |
2651 | /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) |
2652 | * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ |
2653 | |
2654 | eth_broadcast_addr(addr: msg->da); |
2655 | ether_addr_copy(dst: msg->sa, src: addr); |
2656 | msg->len = htons(6); |
2657 | msg->dsap = 0; |
2658 | msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */ |
2659 | msg->control = 0xaf; /* XID response lsb.1111F101. |
2660 | * F=0 (no poll command; unsolicited frame) */ |
2661 | msg->xid_info[0] = 0x81; /* XID format identifier */ |
2662 | msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */ |
2663 | msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */ |
2664 | |
2665 | skb->dev = dev; |
2666 | skb->protocol = eth_type_trans(skb, dev); |
2667 | memset(skb->cb, 0, sizeof(skb->cb)); |
2668 | netif_rx(skb); |
2669 | } |
2670 | EXPORT_SYMBOL(cfg80211_send_layer2_update); |
2671 | |
2672 | int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap, |
2673 | enum ieee80211_vht_chanwidth bw, |
2674 | int mcs, bool ext_nss_bw_capable, |
2675 | unsigned int max_vht_nss) |
2676 | { |
2677 | u16 map = le16_to_cpu(cap->supp_mcs.rx_mcs_map); |
2678 | int ext_nss_bw; |
2679 | int supp_width; |
2680 | int i, mcs_encoding; |
2681 | |
2682 | if (map == 0xffff) |
2683 | return 0; |
2684 | |
2685 | if (WARN_ON(mcs > 9 || max_vht_nss > 8)) |
2686 | return 0; |
2687 | if (mcs <= 7) |
2688 | mcs_encoding = 0; |
2689 | else if (mcs == 8) |
2690 | mcs_encoding = 1; |
2691 | else |
2692 | mcs_encoding = 2; |
2693 | |
2694 | if (!max_vht_nss) { |
2695 | /* find max_vht_nss for the given MCS */ |
2696 | for (i = 7; i >= 0; i--) { |
2697 | int supp = (map >> (2 * i)) & 3; |
2698 | |
2699 | if (supp == 3) |
2700 | continue; |
2701 | |
2702 | if (supp >= mcs_encoding) { |
2703 | max_vht_nss = i + 1; |
2704 | break; |
2705 | } |
2706 | } |
2707 | } |
2708 | |
2709 | if (!(cap->supp_mcs.tx_mcs_map & |
2710 | cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE))) |
2711 | return max_vht_nss; |
2712 | |
2713 | ext_nss_bw = le32_get_bits(v: cap->vht_cap_info, |
2714 | IEEE80211_VHT_CAP_EXT_NSS_BW_MASK); |
2715 | supp_width = le32_get_bits(v: cap->vht_cap_info, |
2716 | IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK); |
2717 | |
2718 | /* if not capable, treat ext_nss_bw as 0 */ |
2719 | if (!ext_nss_bw_capable) |
2720 | ext_nss_bw = 0; |
2721 | |
2722 | /* This is invalid */ |
2723 | if (supp_width == 3) |
2724 | return 0; |
2725 | |
2726 | /* This is an invalid combination so pretend nothing is supported */ |
2727 | if (supp_width == 2 && (ext_nss_bw == 1 || ext_nss_bw == 2)) |
2728 | return 0; |
2729 | |
2730 | /* |
2731 | * Cover all the special cases according to IEEE 802.11-2016 |
2732 | * Table 9-250. All other cases are either factor of 1 or not |
2733 | * valid/supported. |
2734 | */ |
2735 | switch (bw) { |
2736 | case IEEE80211_VHT_CHANWIDTH_USE_HT: |
2737 | case IEEE80211_VHT_CHANWIDTH_80MHZ: |
2738 | if ((supp_width == 1 || supp_width == 2) && |
2739 | ext_nss_bw == 3) |
2740 | return 2 * max_vht_nss; |
2741 | break; |
2742 | case IEEE80211_VHT_CHANWIDTH_160MHZ: |
2743 | if (supp_width == 0 && |
2744 | (ext_nss_bw == 1 || ext_nss_bw == 2)) |
2745 | return max_vht_nss / 2; |
2746 | if (supp_width == 0 && |
2747 | ext_nss_bw == 3) |
2748 | return (3 * max_vht_nss) / 4; |
2749 | if (supp_width == 1 && |
2750 | ext_nss_bw == 3) |
2751 | return 2 * max_vht_nss; |
2752 | break; |
2753 | case IEEE80211_VHT_CHANWIDTH_80P80MHZ: |
2754 | if (supp_width == 0 && ext_nss_bw == 1) |
2755 | return 0; /* not possible */ |
2756 | if (supp_width == 0 && |
2757 | ext_nss_bw == 2) |
2758 | return max_vht_nss / 2; |
2759 | if (supp_width == 0 && |
2760 | ext_nss_bw == 3) |
2761 | return (3 * max_vht_nss) / 4; |
2762 | if (supp_width == 1 && |
2763 | ext_nss_bw == 0) |
2764 | return 0; /* not possible */ |
2765 | if (supp_width == 1 && |
2766 | ext_nss_bw == 1) |
2767 | return max_vht_nss / 2; |
2768 | if (supp_width == 1 && |
2769 | ext_nss_bw == 2) |
2770 | return (3 * max_vht_nss) / 4; |
2771 | break; |
2772 | } |
2773 | |
2774 | /* not covered or invalid combination received */ |
2775 | return max_vht_nss; |
2776 | } |
2777 | EXPORT_SYMBOL(ieee80211_get_vht_max_nss); |
2778 | |
2779 | bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype, |
2780 | bool is_4addr, u8 check_swif) |
2781 | |
2782 | { |
2783 | bool is_vlan = iftype == NL80211_IFTYPE_AP_VLAN; |
2784 | |
2785 | switch (check_swif) { |
2786 | case 0: |
2787 | if (is_vlan && is_4addr) |
2788 | return wiphy->flags & WIPHY_FLAG_4ADDR_AP; |
2789 | return wiphy->interface_modes & BIT(iftype); |
2790 | case 1: |
2791 | if (!(wiphy->software_iftypes & BIT(iftype)) && is_vlan) |
2792 | return wiphy->flags & WIPHY_FLAG_4ADDR_AP; |
2793 | return wiphy->software_iftypes & BIT(iftype); |
2794 | default: |
2795 | break; |
2796 | } |
2797 | |
2798 | return false; |
2799 | } |
2800 | EXPORT_SYMBOL(cfg80211_iftype_allowed); |
2801 | |
2802 | void cfg80211_remove_link(struct wireless_dev *wdev, unsigned int link_id) |
2803 | { |
2804 | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy: wdev->wiphy); |
2805 | |
2806 | lockdep_assert_wiphy(wdev->wiphy); |
2807 | |
2808 | switch (wdev->iftype) { |
2809 | case NL80211_IFTYPE_AP: |
2810 | case NL80211_IFTYPE_P2P_GO: |
2811 | cfg80211_stop_ap(rdev, dev: wdev->netdev, link: link_id, notify: true); |
2812 | break; |
2813 | default: |
2814 | /* per-link not relevant */ |
2815 | break; |
2816 | } |
2817 | |
2818 | wdev->valid_links &= ~BIT(link_id); |
2819 | |
2820 | rdev_del_intf_link(rdev, wdev, link_id); |
2821 | |
2822 | eth_zero_addr(addr: wdev->links[link_id].addr); |
2823 | } |
2824 | |
2825 | void cfg80211_remove_links(struct wireless_dev *wdev) |
2826 | { |
2827 | unsigned int link_id; |
2828 | |
2829 | /* |
2830 | * links are controlled by upper layers (userspace/cfg) |
2831 | * only for AP mode, so only remove them here for AP |
2832 | */ |
2833 | if (wdev->iftype != NL80211_IFTYPE_AP) |
2834 | return; |
2835 | |
2836 | if (wdev->valid_links) { |
2837 | for_each_valid_link(wdev, link_id) |
2838 | cfg80211_remove_link(wdev, link_id); |
2839 | } |
2840 | } |
2841 | |
2842 | int cfg80211_remove_virtual_intf(struct cfg80211_registered_device *rdev, |
2843 | struct wireless_dev *wdev) |
2844 | { |
2845 | cfg80211_remove_links(wdev); |
2846 | |
2847 | return rdev_del_virtual_intf(rdev, wdev); |
2848 | } |
2849 | |
2850 | const struct wiphy_iftype_ext_capab * |
2851 | cfg80211_get_iftype_ext_capa(struct wiphy *wiphy, enum nl80211_iftype type) |
2852 | { |
2853 | int i; |
2854 | |
2855 | for (i = 0; i < wiphy->num_iftype_ext_capab; i++) { |
2856 | if (wiphy->iftype_ext_capab[i].iftype == type) |
2857 | return &wiphy->iftype_ext_capab[i]; |
2858 | } |
2859 | |
2860 | return NULL; |
2861 | } |
2862 | EXPORT_SYMBOL(cfg80211_get_iftype_ext_capa); |
2863 | |