| 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | #include <linux/io.h> |
| 3 | #include <linux/slab.h> |
| 4 | #include <linux/memblock.h> |
| 5 | #include <linux/cc_platform.h> |
| 6 | #include <linux/pgtable.h> |
| 7 | |
| 8 | #include <asm/set_memory.h> |
| 9 | #include <asm/realmode.h> |
| 10 | #include <asm/tlbflush.h> |
| 11 | #include <asm/crash.h> |
| 12 | #include <asm/msr.h> |
| 13 | #include <asm/sev.h> |
| 14 | |
| 15 | struct real_mode_header *; |
| 16 | u32 *trampoline_cr4_features; |
| 17 | |
| 18 | /* Hold the pgd entry used on booting additional CPUs */ |
| 19 | pgd_t trampoline_pgd_entry; |
| 20 | |
| 21 | void load_trampoline_pgtable(void) |
| 22 | { |
| 23 | #ifdef CONFIG_X86_32 |
| 24 | load_cr3(initial_page_table); |
| 25 | #else |
| 26 | /* |
| 27 | * This function is called before exiting to real-mode and that will |
| 28 | * fail with CR4.PCIDE still set. |
| 29 | */ |
| 30 | if (boot_cpu_has(X86_FEATURE_PCID)) |
| 31 | cr4_clear_bits(X86_CR4_PCIDE); |
| 32 | |
| 33 | write_cr3(x: real_mode_header->trampoline_pgd); |
| 34 | #endif |
| 35 | |
| 36 | /* |
| 37 | * The CR3 write above will not flush global TLB entries. |
| 38 | * Stale, global entries from previous page tables may still be |
| 39 | * present. Flush those stale entries. |
| 40 | * |
| 41 | * This ensures that memory accessed while running with |
| 42 | * trampoline_pgd is *actually* mapped into trampoline_pgd. |
| 43 | */ |
| 44 | __flush_tlb_all(); |
| 45 | } |
| 46 | |
| 47 | void __init reserve_real_mode(void) |
| 48 | { |
| 49 | phys_addr_t mem; |
| 50 | size_t size = real_mode_size_needed(); |
| 51 | |
| 52 | if (!size) |
| 53 | return; |
| 54 | |
| 55 | WARN_ON(slab_is_available()); |
| 56 | |
| 57 | /* Has to be under 1M so we can execute real-mode AP code. */ |
| 58 | mem = memblock_phys_alloc_range(size, PAGE_SIZE, start: 0, end: 1<<20); |
| 59 | if (!mem) |
| 60 | pr_info("No sub-1M memory is available for the trampoline\n" ); |
| 61 | else |
| 62 | set_real_mode_mem(mem); |
| 63 | |
| 64 | /* |
| 65 | * Unconditionally reserve the entire first 1M, see comment in |
| 66 | * setup_arch(). |
| 67 | */ |
| 68 | memblock_reserve(base: 0, SZ_1M); |
| 69 | |
| 70 | memblock_clear_kho_scratch(base: 0, SZ_1M); |
| 71 | } |
| 72 | |
| 73 | static void __init sme_sev_setup_real_mode(struct trampoline_header *th) |
| 74 | { |
| 75 | #ifdef CONFIG_AMD_MEM_ENCRYPT |
| 76 | if (cc_platform_has(attr: CC_ATTR_HOST_MEM_ENCRYPT)) |
| 77 | th->flags |= TH_FLAGS_SME_ACTIVE; |
| 78 | |
| 79 | if (cc_platform_has(attr: CC_ATTR_GUEST_STATE_ENCRYPT)) { |
| 80 | /* |
| 81 | * Skip the call to verify_cpu() in secondary_startup_64 as it |
| 82 | * will cause #VC exceptions when the AP can't handle them yet. |
| 83 | */ |
| 84 | th->start = (u64) secondary_startup_64_no_verify; |
| 85 | |
| 86 | if (sev_es_setup_ap_jump_table(rmh: real_mode_header)) |
| 87 | panic(fmt: "Failed to get/update SEV-ES AP Jump Table" ); |
| 88 | } |
| 89 | #endif |
| 90 | } |
| 91 | |
| 92 | static void __init setup_real_mode(void) |
| 93 | { |
| 94 | u16 real_mode_seg; |
| 95 | const u32 *rel; |
| 96 | u32 count; |
| 97 | unsigned char *base; |
| 98 | unsigned long phys_base; |
| 99 | struct trampoline_header *; |
| 100 | size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); |
| 101 | #ifdef CONFIG_X86_64 |
| 102 | u64 *trampoline_pgd; |
| 103 | u64 efer; |
| 104 | int i; |
| 105 | #endif |
| 106 | |
| 107 | base = (unsigned char *)real_mode_header; |
| 108 | |
| 109 | /* |
| 110 | * If SME is active, the trampoline area will need to be in |
| 111 | * decrypted memory in order to bring up other processors |
| 112 | * successfully. This is not needed for SEV. |
| 113 | */ |
| 114 | if (cc_platform_has(attr: CC_ATTR_HOST_MEM_ENCRYPT)) |
| 115 | set_memory_decrypted(addr: (unsigned long)base, numpages: size >> PAGE_SHIFT); |
| 116 | |
| 117 | memcpy(base, real_mode_blob, size); |
| 118 | |
| 119 | phys_base = __pa(base); |
| 120 | real_mode_seg = phys_base >> 4; |
| 121 | |
| 122 | rel = (u32 *) real_mode_relocs; |
| 123 | |
| 124 | /* 16-bit segment relocations. */ |
| 125 | count = *rel++; |
| 126 | while (count--) { |
| 127 | u16 *seg = (u16 *) (base + *rel++); |
| 128 | *seg = real_mode_seg; |
| 129 | } |
| 130 | |
| 131 | /* 32-bit linear relocations. */ |
| 132 | count = *rel++; |
| 133 | while (count--) { |
| 134 | u32 *ptr = (u32 *) (base + *rel++); |
| 135 | *ptr += phys_base; |
| 136 | } |
| 137 | |
| 138 | /* Must be performed *after* relocation. */ |
| 139 | trampoline_header = (struct trampoline_header *) |
| 140 | __va(real_mode_header->trampoline_header); |
| 141 | |
| 142 | #ifdef CONFIG_X86_32 |
| 143 | trampoline_header->start = __pa_symbol(startup_32_smp); |
| 144 | trampoline_header->gdt_limit = __BOOT_DS + 7; |
| 145 | trampoline_header->gdt_base = __pa_symbol(boot_gdt); |
| 146 | #else |
| 147 | /* |
| 148 | * Some AMD processors will #GP(0) if EFER.LMA is set in WRMSR |
| 149 | * so we need to mask it out. |
| 150 | */ |
| 151 | rdmsrq(MSR_EFER, efer); |
| 152 | trampoline_header->efer = efer & ~EFER_LMA; |
| 153 | |
| 154 | trampoline_header->start = (u64) secondary_startup_64; |
| 155 | trampoline_cr4_features = &trampoline_header->cr4; |
| 156 | *trampoline_cr4_features = mmu_cr4_features; |
| 157 | |
| 158 | trampoline_header->flags = 0; |
| 159 | |
| 160 | trampoline_lock = &trampoline_header->lock; |
| 161 | *trampoline_lock = 0; |
| 162 | |
| 163 | trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd); |
| 164 | |
| 165 | /* Map the real mode stub as virtual == physical */ |
| 166 | trampoline_pgd[0] = trampoline_pgd_entry.pgd; |
| 167 | |
| 168 | /* |
| 169 | * Include the entirety of the kernel mapping into the trampoline |
| 170 | * PGD. This way, all mappings present in the normal kernel page |
| 171 | * tables are usable while running on trampoline_pgd. |
| 172 | */ |
| 173 | for (i = pgd_index(__PAGE_OFFSET); i < PTRS_PER_PGD; i++) |
| 174 | trampoline_pgd[i] = init_top_pgt[i].pgd; |
| 175 | #endif |
| 176 | |
| 177 | sme_sev_setup_real_mode(th: trampoline_header); |
| 178 | } |
| 179 | |
| 180 | /* |
| 181 | * reserve_real_mode() gets called very early, to guarantee the |
| 182 | * availability of low memory. This is before the proper kernel page |
| 183 | * tables are set up, so we cannot set page permissions in that |
| 184 | * function. Also trampoline code will be executed by APs so we |
| 185 | * need to mark it executable at do_pre_smp_initcalls() at least, |
| 186 | * thus run it as a early_initcall(). |
| 187 | */ |
| 188 | static void __init set_real_mode_permissions(void) |
| 189 | { |
| 190 | unsigned char *base = (unsigned char *) real_mode_header; |
| 191 | size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); |
| 192 | |
| 193 | size_t ro_size = |
| 194 | PAGE_ALIGN(real_mode_header->ro_end) - |
| 195 | __pa(base); |
| 196 | |
| 197 | size_t text_size = |
| 198 | PAGE_ALIGN(real_mode_header->ro_end) - |
| 199 | real_mode_header->text_start; |
| 200 | |
| 201 | unsigned long text_start = |
| 202 | (unsigned long) __va(real_mode_header->text_start); |
| 203 | |
| 204 | set_memory_nx(addr: (unsigned long) base, numpages: size >> PAGE_SHIFT); |
| 205 | set_memory_ro(addr: (unsigned long) base, numpages: ro_size >> PAGE_SHIFT); |
| 206 | set_memory_x(addr: (unsigned long) text_start, numpages: text_size >> PAGE_SHIFT); |
| 207 | } |
| 208 | |
| 209 | void __init init_real_mode(void) |
| 210 | { |
| 211 | if (!real_mode_header) |
| 212 | panic(fmt: "Real mode trampoline was not allocated" ); |
| 213 | |
| 214 | setup_real_mode(); |
| 215 | set_real_mode_permissions(); |
| 216 | } |
| 217 | |
| 218 | static int __init do_init_real_mode(void) |
| 219 | { |
| 220 | x86_platform.realmode_init(); |
| 221 | return 0; |
| 222 | } |
| 223 | early_initcall(do_init_real_mode); |
| 224 | |